Heat equation

The heat equation is a parabolic partial differential equation that occurs in the theory of heat transfer and models the evolution of the temperature of a body through time under simplified assumptions.

Uses your system voice; voice and rate in settings.

≈ 31 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The heat equation is a parabolic partial differential equation that occurs in the theory of heat transfer and models the evolution of the temperature of a body through time under simplified assumptions. The theory of the heat equation was first developed by Joseph Fourier in 1822 for the purpose of modeling how a quantity such as heat diffuses through a given region.

Since then, the heat equation and its variants have been found to be fundamental in many parts of both pure and applied mathematics. \frac{\partial u}{\partial t} = \frac{\partial^2 u}{\partial x_1^2} + \cdots + \frac{\partial^2 u}{\partial x_n^2}, where (x_1, x_2, \cdots, x_n,t) denotes a general point of the domain. It is typical to refer to t as time and (x_1, x_2,\cdots, x_n) as spatial variables, even in abstract contexts where these phrases fail to have their intuitive meaning.

The collection of spatial variables is often referred to simply as . For any given value of , the right-hand side of the equation is the Laplacian of the function u(\cdot,t): U \to \mathbb{R} .

As such, the heat equation is often written more compactly as In physics and engineering contexts, especially in the context of diffusion through a medium, it is more common to fix a Cartesian coordinate system and then to consider the specific case of a function u(x,y,z,t) of three spatial variables (x,y,z) and time variable t . One then says that is a solution of the heat equation if \frac{\partial u}{\partial t} = \alpha\left(\frac{\partial^2u}{\partial x^2}+\frac{\partial^2u}{\partial y^2}+\frac{\partial^2u}{\partial z^2}\right) in which \alpha is a positive coefficient called the thermal diffusivity of the medium. In addition to other physical phenomena, this equation describes the flow of heat in a homogeneous and isotropic medium, with u(x,y,z,t) being the temperature at the point (x,y,z) and time t . If the medium is not homogeneous and isotropic, then \alpha would not be a fixed coefficient, and would instead depend on (x,y,z) ; the equation would also have a slightly different form.

In some physics and engineering literature, it is common to use \Delta to denote the Laplacian, rather than \nabla^2 . But the "nabla-squared" (\nabla^2) notation is more modern and recommended, while \Delta may denote a simple change in some cases.

In mathematics as well as in physics and engineering, it is common to use Newton's notation for time derivatives, so that \dot u is used to denote \frac{\partial u}{\partial t} , so the equation can be written Note also that the ability to use either \Delta or \nabla^2 to denote the Laplacian, without explicit reference to the spatial variables, is a reflection of the fact that the Laplacian is independent of the choice of coordinate system. In mathematical terms, one would say that the Laplacian is translationally and rotationally invariant.

In fact, it is (loosely speaking) the simplest differential operator which has these symmetries. This can be taken as a significant (and purely mathematical) justification of the use of the Laplacian and of the heat equation in modeling any physical phenomena which are homogeneous and isotropic, of which heat diffusion is a principal example. \frac{\partial u}{\partial t}=\alpha\nabla^2 u. Define a new function v(t,x)=u\left(\frac{t}{\alpha},x \right) .

Then, according to the chain rule, one has Thus, there is a straightforward way of translating between solutions of the heat equation with a general value of \alpha and solutions of the heat equation with \alpha = 1 . As such, for the sake of mathematical analysis, it is often sufficient to only consider the case \alpha = 1 .

Since \alpha>0 there is another option to define a v satisfying \frac{\partial}{\partial t} v = \nabla^2 v as in ( ) above by setting v(t,x) = u\left(t, \alpha^{\frac{1}{2}} x\right) . Note that the two possible means of defining the new function v discussed here amount, in physical terms, to changing the unit of measure of time or the unit of measure of length. \frac{\partial u}{\partial t} = \nabla^2 u + f for a given function f = f(x,t) which is allowed to depend on both x and t . The inhomogeneous heat equation models thermal problems in which a heat source modeled by is switched on.

For example, it can be used to model the temperature throughout a room with a heater switched on. If S \subset U is the region of the room where the heater is and the heater is constantly generating q units of heat per unit of volume, then f would be given by f(x,t) = q 1_S(x) . A solution to the heat equation \frac{\partial u}{\partial t} = \nabla^2 u is said to be a steady-state solution if it does not vary with respect to time: 0 = \frac{\partial u}{\partial t} = \nabla^2 u. Flowing via. the heat equation causes it to become closer and closer as time increases to a steady-state solution.

For very large time, is closely approximated by a steady-state solution. A steady state solution of the heat equation is equivalently a solution of Laplace's equation.

Similarly, a solution to the nonhomogeneous heat equation \frac{\partial u}{\partial t} = \nabla^2 u + f is said to be a steady-state solution if it does not vary with respect to time: 0 = \frac{\partial u}{\partial t} = \nabla^2 u + f. This is equivalently a solution of Poisson's equation. In the steady-state case, a nonzero spatial thermal gradient \nabla u may (or may not) be present, but if it is, it does not change in time.

The steady-state equation describes the end result in all thermal problems in which a source is switched on (for example, an engine started in an automobile), and enough time has passed for all permanent temperature gradients to establish themselves in space, after which these spatial gradients no longer change in time (as again, with an automobile in which the engine has been running for long enough). The other (trivial) solution is for all spatial temperature gradients to disappear as well, in which case the temperature become uniform in space, as well.

The steady-state equations are simpler and can help to understand better the physics of the materials without focusing on the dynamics of heat transport. It is widely used for simple engineering problems assuming there is equilibrium of the temperature fields and heat transport, with time. u_{(x)}(0)&=u(x)\\ u_{(x)}'(0)&=0\\ u_{(x)}(0)&=\frac{1}{n}\nabla^2 u(x) \end{align} where is the single-variable function denoting the average value of u over the surface of the sphere of radius centered at ; it can be defined by u_{(x)}(r)=\frac{1}{\omega_{n-1}r^{n-1}}\int_{\{y:|x-y|=r\}}u\,d\mathcal{H}^{n-1}, in which \omega_{n-1} denotes the surface area of the unit ball in n -dimensional Euclidean space.

This formalizes the above statement that the value of \nabla^2 u at a point x measures the difference between the value of u(x) and the value of at points nearby to x , in the sense that the latter is encoded by the values of u_{(x)}(r) for small positive values of r . Following this observation, one may interpret the heat equation as imposing an infinitesimal averaging of a function. Given a solution of the heat equation, the value of u(x,t+\tau) for a small positive value of \tau may be approximated as \frac{1}{2n} times the average value of the function u(\cdot,t) over a sphere of very small radius centered at x . [[Image:Heatequation exampleB.gif|right|frame|Solution of a 1D heat partial differential equation.

The temperature ( u ) is initially distributed over a one-dimensional, one-unit-long interval (x = [0,1]) with insulated endpoints. The distribution approaches equilibrium over time. The heat equation implies that peaks (local maxima) of u will be gradually eroded down, while depressions (local minima) will be filled in.

The value at some point will remain stable only as long as it is equal to the average value in its immediate surroundings. In particular, if the values in a neighborhood are very close to a linear function A x + B y + C z + D , then the value at the center of that neighborhood will not be changing at that time (that is, the derivative \dot u will be zero).

A more subtle consequence is the maximum principle, that says that the maximum value of u in any region R of the medium will not exceed the maximum value that previously occurred in R , unless it is on the boundary of R . That is, the maximum temperature in a region R can increase only if heat comes in from outside R . This is a property of parabolic partial differential equations and is not difficult to prove mathematically (see below). Another interesting property is that even if u initially has a sharp jump (discontinuity) of value across some surface inside the medium, the jump is immediately smoothed out by a momentary, infinitesimally short but infinitely large rate of flow of heat through that surface.

For example, if two isolated bodies, initially at uniform but different temperatures u_0 and u_1 , are made to touch each other, the temperature at the point of contact will immediately assume some intermediate value, and a zone will develop around that point where u will gradually vary between u_0 and u_1 . If a certain amount of heat is suddenly applied to a point in the medium, it will spread out in all directions in the form of a diffusion wave.

Unlike the elastic and electromagnetic waves, the speed of a diffusion wave drops with time: as it spreads over a larger region, the temperature gradient decreases, and therefore the heat flow decreases too. \mathbf{q} = - k \, \nabla u where k is the thermal conductivity of the material, u=u(\mathbf{x},t) is the temperature, and \mathbf{q} = \mathbf{q}(\mathbf{x},t) is a vector field that represents the magnitude and direction of the heat flow at the point \mathbf{x} of space and time t . If the medium is a thin rod of uniform section and material, the position x is a single coordinate and the heat flow q = q(t,x) towards x is a scalar field. The equation becomes q = -k \,\frac{\partial u}{\partial x} Let Q=Q(x,t) be the internal energy (heat) per unit volume of the bar at each point and time.

The rate of change in heat per unit volume in the material, \partial Q/\partial t , is proportional to the rate of change of its temperature, \partial u/\partial t . That is, \frac{\partial Q}{\partial t} = c \, \rho \, \frac{\partial u}{\partial t} where c is the specific heat capacity (at constant pressure, in case of a gas) and \rho is the density (mass per unit volume) of the material. This derivation assumes that the material has constant mass density and heat capacity through space as well as time.

Applying the law of conservation of energy to a small element of the medium centred at x , one concludes that the rate at which heat changes at a given point x is equal to the derivative of the heat flow at that point (the difference between the heat flows either side of the particle). That is, \frac{\partial Q}{\partial t} = - \frac{\partial q}{\partial x} From the above equations it follows that \frac{\partial u}{\partial t} \;=\; - \frac{1}{c \rho} \frac{\partial q}{\partial x} \;=\; - \frac{1}{c \rho} \frac{\partial}{\partial x} \left(-k \,\frac{\partial u}{\partial x} \right) \;=\; \frac{k}{c \rho} \frac{\partial^2 u}{\partial x^2} which is the heat equation in one dimension, with diffusivity coefficient \alpha = \frac{k}{c\rho} This quantity is called the thermal diffusivity of the medium.

An additional term may be introduced into the equation to account for radiative loss of heat. According to the Stefan–Boltzmann law, this term is \mu \left(u^4 - v^4\right) , where v=v(x,t) is the temperature of the surroundings, and \mu is a coefficient that depends on the Stefan-Boltzmann constant, the emissivity of the material, and the geometry.

The rate of change in internal energy becomes \frac{\partial Q}{\partial t} = - \frac{\partial q}{\partial x} - \mu \left(u^4 - v^4\right) and the equation for the evolution of u becomes \frac{\partial u}{\partial t} = \frac{k}{c \rho} \frac{\partial^2 u}{\partial x^2} - \frac{\mu}{c \rho}\left(u^4 - v^4\right). \rho c_p \frac{\partial T}{\partial t} - \nabla \cdot \left( k \nabla T \right) = \dot q_V where \dot q_V is the volumetric heat source. The time rate of heat flow into a region V is given by a time-dependent quantity q t (V). We assume q has a density Q, so that q_t(V) = \int_V Q(x,t)\,d x \quad Heat flow is a time-dependent vector function H(x) characterized as follows: the time rate of heat flowing through an infinitesimal surface element with area dS and with unit normal vector n is \mathbf{H}(x) \cdot \mathbf{n}(x) \, dS .

Thus the rate of heat flow into V is also given by the surface integral q_t(V)= - \int_{\partial V} \mathbf{H}(x) \cdot \mathbf{n}(x) \, dS where n(x) is the outward pointing normal vector at x. The Fourier law states that heat energy flow has the following linear dependence on the temperature gradient \mathbf{H}(x) = -\mathbf{A}(x) \cdot \nabla u (x) where A(x) is a 3 × 3 real matrix that is symmetric and positive definite. By the divergence theorem, the previous surface integral for heat flow into V can be transformed into the volume integral \begin{align} q_t(V) &= - \int_{\partial V} \mathbf{H}(x) \cdot \mathbf{n}(x) \, dS \\ &= \int_{\partial V} \mathbf{A}(x) \cdot \nabla u (x) \cdot \mathbf{n}(x) \, dS \\ &= \int_V \sum_{i, j} \partial_{x_i} \bigl( a_{i j}(x) \partial_{x_j} u (x,t) \bigr)\,dx \end{align} The time rate of temperature change at x is proportional to the heat flowing into an infinitesimal volume element, where the constant of proportionality is dependent on a constant κ \partial_t u(x,t) = \kappa(x) Q(x,t) Putting these equations together gives the general equation of heat flow: \partial_t u(x,t) = \kappa(x) \sum_{i, j} \partial_{x_i} \bigl( a_{i j}(x) \partial_{x_j} u (x,t)\bigr) Remarks The coefficient κ(x) is the inverse of specific heat of the substance at x × density of the substance at x: \kappa = 1/(\rho c_p) . In the case of an isotropic medium, the matrix A is a scalar matrix equal to thermal conductivity k. In the anisotropic case where the coefficient matrix A is not scalar and/or if it depends on x, then an explicit formula for the solution of the heat equation can seldom be written down, though it is usually possible to consider the associated abstract Cauchy problem and show that it is a well-posed problem and/or to show some qualitative properties (like preservation of positive initial data, infinite speed of propagation, convergence toward an equilibrium, smoothing properties).

This is usually done by one-parameter semigroups theory: for instance, if A is a symmetric matrix, then the elliptic operator defined by Au(x):=\sum_{i, j} \partial_{x_i} a_{i j}(x) \partial_{x_j} u (x) is self-adjoint and dissipative, thus by the spectral theorem it generates a one-parameter semigroup. \frac{\partial u}{\partial t} = \alpha \nabla^2 u = \alpha \left(\frac{\partial^2 u}{\partial x^2} + \frac{\partial^2 u}{\partial y^2} + \frac{\partial^2 u}{\partial z^2 }\right) = \alpha \left( u_{xx} + u_{yy} + u_{zz} \right) where: u = u(x, y, z, t) is temperature as a function of space and time; \tfrac{\partial u}{\partial t} is the rate of change of temperature at a point over time; u_{xx} , u_{yy} , and u_{zz} are the second spatial derivatives (thermal conductions) of temperature in the x , y , and z directions, respectively; \alpha \equiv \tfrac{k}{c_p\rho} is the thermal diffusivity, a material-specific quantity depending on the thermal conductivity k , the specific heat capacity c_p , and the mass density \rho . The heat equation is a consequence of Fourier's law of conduction (see heat conduction).

If the medium is not the whole space, in order to solve the heat equation uniquely we also need to specify boundary conditions for u. To determine uniqueness of solutions in the whole space it is necessary to assume additional conditions, for example an exponential bound on the growth of solutions or a sign condition (nonnegative solutions are unique by a result of David Widder). Solutions of the heat equation are characterized by a gradual smoothing of the initial temperature distribution by the flow of heat from warmer to colder areas of an object.

Generally, many different states and starting conditions will tend toward the same stable equilibrium. As a consequence, to reverse the solution and conclude something about earlier times or initial conditions from the present heat distribution is very inaccurate except over the shortest of time periods.

The heat equation is the prototypical example of a parabolic partial differential equation. Using the Laplace operator, the heat equation can be simplified, and generalized to similar equations over spaces of arbitrary number of dimensions, as u_t = \alpha \nabla^2 u = \alpha \Delta u, where the Laplace operator, denoted as either Δ or as ∇ 2 (the divergence of the gradient), is taken in the spatial variables.

The heat equation governs heat diffusion, as well as other diffusive processes, such as particle diffusion or the propagation of action potential in nerve cells. Although they are not diffusive in nature, some quantum mechanics problems are also governed by a mathematical analog of the heat equation (see below).

It also can be used to model some phenomena arising in finance, like the Black–Scholes or the Ornstein-Uhlenbeck processes. The equation, and various non-linear analogues, has also been used in image analysis. The heat equation is, technically, in violation of special relativity, because its solutions involve instantaneous propagation of a disturbance.

The part of the disturbance outside the forward light cone can usually be safely neglected, but if it is necessary to develop a reasonable speed for the transmission of heat, a hyperbolic problem should be considered instead – like a partial differential equation involving a second-order time derivative. Some models of nonlinear heat conduction (which are also parabolic equations) have solutions with finite heat transmission speed. \frac{1}{\alpha} \frac{\partial u}{\partial t} = \left(\frac{\partial^2 u}{\partial x^2} + \frac{\partial^2 u}{\partial y^2} + \frac{\partial^2 u}{\partial z^2} \right) + \frac{1}{k}q. For example, a tungsten light bulb filament generates heat, so it would have a positive nonzero value for q when turned on.

While the light is turned off, the value of q for the tungsten filament would be zero. where u = u(x, t) is a function of two variables x and t. Here x is the space variable, so x ∈ [0, L], where L is the length of the rod. t is the time variable, so t ≥ 0. We assume the initial condition where the function f is given, and the boundary conditions Let us attempt to find a solution of that is not identically zero satisfying the boundary conditions but with the following property: u is a product in which the dependence of u on x, t is separated, that is: This solution technique is called separation of variables.

Substituting u back into equation , \frac{T'(t)}{\alpha T(t)} = \frac{X(x)}{X(x)}. Since the right hand side depends only on x and the left hand side only on t, both sides are equal to some constant value −λ. Thus: and We will now show that nontrivial solutions for for values of λ ≤ 0 cannot occur: Suppose that λ X(x) = B e^{\sqrt{-\lambda} \, x} + C e^{-\sqrt{-\lambda} \, x}.

From we get X(0) = 0 = X(L) and therefore B = 0 = C which implies u is identically 0. Suppose that λ = 0. Then there exist real numbers B, C such that X(x) = Bx + C. From equation we conclude in the same manner as in 1 that u is identically 0.

Therefore, it must be the case that λ > 0. Then there exist real numbers A, B, C such that T(t) = A e^{-\lambda \alpha t} and X(x) = B \sin\left(\sqrt{\lambda} \, x\right) + C \cos\left(\sqrt{\lambda} \, x\right). From we get C = 0 and that for some positive integer n, \sqrt{\lambda} = n \frac{\pi}{L}.

This solves the heat equation in the special case that the dependence of u has the special form . In general, the sum of solutions to that satisfy the boundary conditions also satisfies and .

We can show that the solution to , and is given by u(x,t) = \sum_{n = 1}^{\infty} D_n \sin \left(\frac{n\pi x}{L}\right) e^{-\frac{n^2 \pi^2 \alpha t}{L^2}} where D_n = \frac{2}{L} \int_0^L f(x) \sin \left(\frac{n\pi x}{L}\right ) \, dx. Consider the linear operator Δu = u xx .

The infinite sequence of functions e_n(x) = \sqrt{\frac{2}{L}}\sin \left(\frac{n\pi x}{L}\right) for n ≥ 1 are eigenfunctions of Δ. Indeed, \Delta e_n = -\frac{n^2 \pi^2}{L^2} e_n. Moreover, any eigenfunction f of Δ with the boundary conditions f(0) = f(L) = 0 is of the form e n for some n ≥ 1.

The functions e n for n ≥ 1 form an orthonormal sequence with respect to a certain inner product on the space of real-valued functions on [0, L]. This means \langle e_n, e_m \rangle = \int_0^L e_n(x) e^*_m(x) dx = \delta_{mn} Finally, the sequence {e n } n ∈ N spans a dense linear subspace of L 2 ((0, L)). This shows that in effect we have diagonalized the operator Δ. (\partial_t -\Delta)u=0 satisfy a mean-value property analogous to the mean-value properties of harmonic functions, solutions of \Delta u = 0, though a bit more complicated.

Precisely, if u solves (\partial_t -\Delta)u=0 and (x,t)+E_\lambda\subset\mathrm{dom}(u) then u(x,t)=\frac{\lambda}{4}\int_{E_\lambda}u(x-y,t-s)\frac{|y|^2}{s^2}ds\,dy, where E_\lambda is a heat-ball, that is a super-level set of the fundamental solution of the heat equation: E_\lambda := \{(y,s) : \Phi(y,s) > \lambda\}, \Phi(x,t) := (4t\pi)^{-\frac{n}{2}}\exp\left(-\frac{|x|^2}{4t}\right). Notice that \mathrm{diam}(E_\lambda)=o(1) as \lambda\to\infty so the above formula holds for any (x,t) in the (open) set \mathrm{dom}(u) for \lambda large enough. u_t(x,t) - k u_{xx}(x,t) = 0& (x, t) \in \R \times (0, \infty)\\ u(x,0)=\delta(x)& \end{cases} where \delta is the Dirac delta function.

The fundamental solution to this problem is given by the heat kernel \Phi(x,t)=\frac{1}{\sqrt{4\pi kt}}\exp\left(-\frac{x^2}{4kt}\right). One can obtain the general solution of the one variable heat equation with initial condition u(x, 0) = g(x) for −∞ u(x,t) = \int \Phi(x-y,t) g(y) dy.

In several spatial variables, the fundamental solution solves the analogous problem \begin{cases} u_t(\mathbf{x},t) - k \sum_{i=1}^nu_{x_ix_i}(\mathbf{x},t) = 0 & (\mathbf{x}, t) \in \R^n \times (0, \infty)\\ u(\mathbf{x},0)=\delta(\mathbf{x}) \end{cases} The n-variable fundamental solution is the product of the fundamental solutions in each variable; i.e., \Phi(\mathbf{x},t) = \Phi(x_1,t) \Phi(x_2,t) \cdots \Phi(x_n,t) = \frac{1}{(4\pi k t)^{n/2}} \exp \left (-\frac{\mathbf{x}\cdot\mathbf{x}}{4kt} \right). The general solution of the heat equation on R n is then obtained by a convolution, so that to solve the initial value problem with u(x, 0) = g(x), one has u(\mathbf{x},t) = \int_{\R^n}\Phi(\mathbf{x}-\mathbf{y},t)g(\mathbf{y})d\mathbf{y}.

The general problem on a domain Ω in R n is \begin{cases} u_t(\mathbf{x},t) - k \sum_{i=1}^nu_{x_ix_i}(\mathbf{x},t) = 0& (\mathbf{x}, t) \in \Omega\times (0, \infty)\\ u(\mathbf{x},0)=g(\mathbf{x})&\mathbf{x}\in\Omega \end{cases} with either Dirichlet or Neumann boundary data. A Green's function always exists, but unless the domain Ω can be readily decomposed into one-variable problems (see below), it may not be possible to write it down explicitly.

Other methods for obtaining Green's functions include the method of images, separation of variables, and Laplace transforms (Cole, 2011). u_{t}=ku_{xx}+f. where f is some given function of x and t. u_{t}=ku_{xx} & (x, t) \in \R \times (0, \infty) \\ u(x,0)=g(x) & \text{Initial condition} \end{cases} u(x,t) = \frac{1}{\sqrt{4\pi kt}} \int_{-\infty}^{\infty} \exp\left(-\frac{(x-y)^2}{4kt}\right)g(y)\,dy ] Comment. This solution is the convolution with respect to the variable x of the fundamental solution \Phi(x,t) := \frac{1}{\sqrt{4\pi kt}} \exp\left(-\frac{x^2}{4kt}\right), and the function g(x). (The Green's function number of the fundamental solution is X00.)

Therefore, according to the general properties of the convolution with respect to differentiation, u = g ∗ Φ is a solution of the same heat equation, for \left (\partial_t-k\partial_x^2 \right )(\Phi*g)=\left [\left (\partial_t-k\partial_x^2 \right )\Phi \right ]*g=0. Moreover, \Phi(x,t)=\frac{1}{\sqrt{t}}\,\Phi\left(\frac{x}{\sqrt{t}},1\right) \int_{-\infty}^{\infty}\Phi(x,t)\,dx=1, so that, by general facts about approximation to the identity, Φ(⋅, t) ∗ g → g as t → 0 in various senses, according to the specific g. For instance, if g is assumed bounded and continuous on R then converges uniformly to g as t → 0, meaning that u(x, t) is continuous on with Initial value problem on (0,∞) with homogeneous Dirichlet boundary conditions : \begin{cases} u_{t}=ku_{xx} & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=g(x) & \text{IC} \\ u(0,t)=0 & \text{BC} \end{cases} u(x,t)=\frac{1}{\sqrt{4\pi kt}} \int_{0}^{\infty} \left[\exp\left(-\frac{(x-y)^2}{4kt}\right)-\exp\left(-\frac{(x+y)^2}{4kt}\right)\right] g(y)\,dy Comment.

This solution is obtained from the preceding formula as applied to the data g(x) suitably extended to R, so as to be an odd function, that is, letting g(−x) := −g(x) for all x. Correspondingly, the solution of the initial value problem on (−∞,∞) is an odd function with respect to the variable x for all values of t, and in particular it satisfies the homogeneous Dirichlet boundary conditions u(0, t) = 0. The Green's function number of this solution is X10.

Initial value problem on (0,∞) with homogeneous Neumann boundary conditions : \begin{cases} u_{t}=ku_{xx} & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=g(x) & \text{IC} \\ u_{x}(0,t)=0 & \text{BC} \end{cases} u(x,t)=\frac{1}{\sqrt{4\pi kt}} \int_{0}^{\infty} \left[\exp\left(-\frac{(x-y)^2}{4kt}\right)+\exp\left(-\frac{(x+y)^2}{4kt}\right)\right]g(y)\,dy Comment. This solution is obtained from the first solution formula as applied to the data g(x) suitably extended to R so as to be an even function, that is, letting g(−x) := g(x) for all x. Correspondingly, the solution of the initial value problem on R is an even function with respect to the variable x for all values of t > 0, and in particular, being smooth, it satisfies the homogeneous Neumann boundary conditions u x (0, t) = 0.

The Green's function number of this solution is X20. Problem on (0,∞) with homogeneous initial conditions and non-homogeneous Dirichlet boundary conditions : \begin{cases} u_{t}=ku_{xx} & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=0 & \text{IC} \\ u(0,t)=h(t) & \text{BC} \end{cases} u(x,t)=\int_{0}^{t} \frac{x}{\sqrt{4\pi k(t-s)^3}} \exp\left(-\frac{x^2}{4k(t-s)}\right)h(s)\,ds, \qquad\forall x>0 Comment.

This solution is the convolution with respect to the variable t of \psi(x,t):=-2k \partial_x \Phi(x,t) = \frac{x}{\sqrt{4\pi kt^3}} \exp\left(-\frac{x^2}{4kt}\right) and the function h(t). Since Φ(x, t) is the fundamental solution of \partial_t-k\partial^2_x, the function ψ(x, t) is also a solution of the same heat equation, and so is u := ψ ∗ h, thanks to general properties of the convolution with respect to differentiation. Moreover, \psi(x,t)=\frac{1}{x^2}\,\psi\left(1,\frac{t}{x^2}\right) \int_0^{\infty}\psi(x,t)\,dt=1, so that, by general facts about approximation to the identity, ψ(x, ⋅) ∗ h → h as x → 0 in various senses, according to the specific h. For instance, if h is assumed continuous on R with support in [0, ∞) then ψ(x, ⋅) ∗ h converges uniformly on compacta to h as x → 0, meaning that u(x, t) is continuous on with \Phi(x,t) := \frac{1}{\sqrt{4\pi kt}} \exp\left(-\frac{x^2}{4 kt}\right) and the function f(x, t), both meant as defined on the whole R 2 and identically 0 for all t → 0.

One verifies that \left (\partial_t-k \partial_x^2 \right )(\Phi*f)=f, which expressed in the language of distributions becomes \left (\partial_t-k \partial_x^2 \right )\Phi=\delta, where the distribution δ is the Dirac's delta function, that is the evaluation at 0. Problem on (0,∞) with homogeneous Dirichlet boundary conditions and initial conditions: \begin{cases} u_{t}=ku_{xx}+f(x,t) & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=0 & \text{IC} \\ u(0,t)=0 & \text{BC} \end{cases} u(x,t)=\int_{0}^{t}\int_{0}^{\infty} \frac{1}{\sqrt{4\pi k(t-s)}} \left(\exp\left(-\frac{(x-y)^2}{4k(t-s)}\right)-\exp\left(-\frac{(x+y)^2}{4k(t-s)}\right)\right) f(y,s)\,dy\,ds Comment.

This solution is obtained from the preceding formula as applied to the data f(x, t) suitably extended to R × [0,∞), so as to be an odd function of the variable x, that is, letting f(−x, t) := −f(x, t) for all x and t. Correspondingly, the solution of the inhomogeneous problem on (−∞,∞) is an odd function with respect to the variable x for all values of t, and in particular it satisfies the homogeneous Dirichlet boundary conditions u(0, t) = 0. Problem on (0,∞) with homogeneous Neumann boundary conditions and initial conditions : \begin{cases} u_{t} = ku_{xx}+f(x,t) & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=0 & \text{IC} \\ u_x(0,t)=0 & \text{BC} \end{cases} u(x,t)=\int_{0}^{t}\int_{0}^{\infty} \frac{1}{\sqrt{4\pi k(t-s)}} \left(\exp\left(-\frac{(x-y)^2}{4k(t-s)}\right)+\exp\left(-\frac{(x+y)^2}{4k(t-s)}\right)\right) f(y,s)\,dy\,ds Comment.

This solution is obtained from the first formula as applied to the data f(x, t) suitably extended to R × [0,∞), so as to be an even function of the variable x, that is, letting f(−x, t) := f(x, t) for all x and t. Correspondingly, the solution of the inhomogeneous problem on (−∞,∞) is an even function with respect to the variable x for all values of t, and in particular, being a smooth function, it satisfies the homogeneous Neumann boundary conditions u x (0, t) = 0. u_{t}=ku_{xx}+f & (x, t) \in \R \times (0, \infty) \\ u(x,0)=g(x) & \text{IC} \end{cases} let u = w + v where w and v solve the problems \begin{cases} v_{t}=kv_{xx}+f, \, w_{t}=kw_{xx} \, & (x, t) \in \R \times (0, \infty) \\ v(x,0)=0,\, w(x,0)=g(x) \, & \text{IC} \end{cases} Similarly, to solve \begin{cases} u_{t}=ku_{xx}+f & (x, t) \in [0, \infty) \times (0, \infty) \\ u(x,0)=g(x) & \text{IC} \\ u(0,t)=h(t) & \text{BC} \end{cases} let u = w + v + r where w, v, and r solve the problems \begin{cases} v_{t}=kv_{xx}+f, \, w_{t}=kw_{xx}, \, r_{t}=kr_{xx} & (x, t) \in [0, \infty) \times (0, \infty) \\ v(x,0)=0, \;

w(x,0)=g(x), \; r(x,0)=0 & \text{IC} \\ v(0,t)=0, \; w(0,t)=0, \; r(0,t)=h(t) & \text{BC} \end{cases} c_t = D \Delta c, or P_t = D \Delta P. Both c and P are functions of position and time. D is the diffusion coefficient that controls the speed of the diffusive process, and is typically expressed in meters squared over second.

If the diffusion coefficient D is not constant, but depends on the concentration c (or P in the second case), then one gets the nonlinear diffusion equation. \mathrm{d}X_t = \sqrt{2k}\; \mathrm{d}B_t \\ X_0=0 \end{cases} where B is the Wiener process (standard Brownian motion). The probability density function of X is given at any time t by \frac{1}{\sqrt{4\pi kt}}\exp\left(-\frac{x^2}{4kt}\right) which is the solution to the initial value problem \begin{cases} u_t(x,t)-ku_{xx}(x,t)=0, & (x,t)\in\R\times(0,+\infty)\\ u(x,0)=\delta(x) \end{cases} where \delta is the Dirac delta function. \psi_t = \frac{i \hbar}{2m} \Delta \psi , where i is the imaginary unit, ħ is the reduced Planck constant, and ψ is the wave function of the particle.

This equation is formally similar to the particle diffusion equation, which one obtains through the following transformation: \begin{align} c(\mathbf R,t) &\to \psi(\mathbf R,t) \\ D &\to \frac{i \hbar}{2m} \end{align} Applying this transformation to the expressions of the Green functions determined in the case of particle diffusion yields the Green functions of the Schrödinger equation, which in turn can be used to obtain the wave function at any time through an integral on the wave function at t = 0: \psi(\mathbf R, t) = \int \psi\left(\mathbf R^0,t=0\right) G\left(\mathbf R - \mathbf R^0,t\right) dR_x^0 \, dR_y^0 \, dR_z^0, with G(\mathbf R,t) = \left( \frac{m}{2 \pi i \hbar t} \right)^{3/2} e^{-\frac {\mathbf R^2 m}{2 i \hbar t}}. Remark: this analogy between quantum mechanics and diffusion is a purely formal one.

Physically, the evolution of the wave function satisfying the Schrödinger equation might have an origin other than diffusion . \frac{T_C - T_S}{T_0 - T_S} =2 \sum_{n = 1}^{\infty} (-1)^{n+1} \exp\left({-\frac{n^2 \pi^2 \alpha t}{L^2}}\right) where is the initial temperature of the sphere and the temperature at the surface of the sphere, of radius . This equation has also found applications in protein energy transfer and thermal modeling in biophysics.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378688364 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001378688364 · captured 2026-10-05 · ledger · version history

Cite this page as: encyclopegia.org, “Heat equation”, snapshot enwiki-001378688364. https://encyclopegia.org/a/heat-equation

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.