Lesson plan

Hexbeam

A hexbeam, or hexagonal-beam, is a type of directional antenna for shortwave, most often used in amateur radio. The name comes from the hexagonal outer shape of the antenna. It may also sometimes be known as a W-antenna, referring to the shape of the driver. The design looks something like an upturned umbrella. The antenna design resembles a modified Yagi–Uda antenna in that it uses parasitic principles from a driver and reflector for achieving gain in one direction. As with the Yagi-Uda antenna, when the RF wave strikes the reflector element it induces current in the reflector causing it to radiate in both directions. This reflector wave combines with the driven wave in the forward direction to produce gain, but subtracts or attenuates in the reverse direction. The Hexbeam uses a W-shaped or M-shaped dipole driver, and a U-shaped reflector. With six arms, it is possible to nest six bands. As with the Moxon antenna, the design omits the directors found in a Yagi-Uda. Its antenna gain is between 5dBi and 6dBi, the forward/reverse attenuation is up to 20 dB. The hexbeam consists of six arms of non-conductive materials such as fiberglass or plastic pipes, and insulated metallic wire is used to form the elements. In the original design, there were two W-shaped elements. This antenna was first introduced by Mike Traffie, N1HXA, in 1996.…

Back to article

Article summary

A hexbeam, or hexagonal-beam, is a type of directional antenna for shortwave, most often used in amateur radio. The name comes from the hexagonal outer shape of the antenna. It may also sometimes be known as a W-antenna, referring to the shape of the driver. The design looks something like an upturned umbrella. The antenna design resembles a modified Yagi–Uda antenna in that it uses parasitic principles from a driver and reflector for achieving gain in one direction. As with the Yagi-Uda antenna, when the RF wave strikes the reflector element it induces current in the reflector causing it to radiate in both directions. This reflector wave combines with the driven wave in the forward direction to produce gain, but subtracts or attenuates in the reverse direction. The Hexbeam uses a W-shaped or M-shaped dipole driver, and a U-shaped reflector. With six arms, it is possible to nest six bands. As with the Moxon antenna, the design omits the directors found in a Yagi-Uda. Its antenna gain is between 5dBi and 6dBi, the forward/reverse attenuation is up to 20 dB. The hexbeam consists of six arms of non-conductive materials such as fiberglass or plastic pipes, and insulated metallic wire is used to form the elements. In the original design, there were two W-shaped elements. This antenna was first introduced by Mike Traffie, N1HXA, in 1996.…

Key claims

  1. publication date: 2007 — source: Wikipedia · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the publication date is "2007". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia https://en.wikipedia.org/w/index.php?oldid=1367159208

Key claims and bibliography are generated from the same tracked claims and sources as the article page.