High-energy X-rays

s of selected isotopes for X-ray photons with energies up to 250 keV.

Uses your system voice; voice and rate in settings.

≈ 5 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

s of selected isotopes for X-ray photons with energies up to 250 keV. High-energy X-rays or HEX-rays are very hard X-rays, with typical energies of 80–1000 keV (1 MeV), about one order of magnitude higher than conventional X-rays used for X-ray crystallography (and well into gamma-ray energies over 120 keV).

They are produced at modern synchrotron radiation sources such as the Cornell High Energy Synchrotron Source, SPring-8, and the beamlines ID15 and BM18 at the European Synchrotron Radiation Facility (ESRF) as well as in Z-Pulsed Power Facility . The main benefit is the deep penetration into matter which makes them a probe for thick samples in physics and materials science and permits an in-air sample environment and operation.

Scattering angles are small and diffraction directed forward allows for simple detector setups. High energy (megavolt) X-rays are also used in cancer therapy, using beams generated by linear accelerators to suppress tumors.

s of selected isotopes for X-ray photons with energies up to 250 keV.]] High-energy X-rays or HEX-rays are very hard X-rays, with typical energies of 80–1000 keV (1 MeV), about one order of magnitude higher than conventional X-rays used for X-ray crystallography (and well into gamma-ray energies over 120 keV).

They are produced at modern synchrotron radiation sources such as the Cornell High Energy Synchrotron Source, SPring-8, and the beamlines ID15 and BM18 at the European Synchrotron Radiation Facility (ESRF) as well as in Z-Pulsed Power Facility . The main benefit is the deep penetration into matter which makes them a probe for thick samples in physics and materials science and permits an in-air sample environment and operation.

Scattering angles are small and diffraction directed forward allows for simple detector setups. High energy (megavolt) X-rays are also used in cancer therapy, using beams generated by linear accelerators to suppress tumors.

Applications

setup for high-energy X-rays. HEX-rays entering from the left are diffracted in forward direction at the sample and registered by a 2D detector such as an image plate. ]] With these advantages, HEX-rays can be applied for a wide range of investigations. An overview, which is far from complete: Structural investigations of real materials, such as metals, ceramics, and liquids.

In particular, in-situ studies of phase transitions at elevated temperatures up to the melt of any metal. Phase transitions, recovery, chemical segregation, recrystallization, twinning and domain formation are a few aspects to follow in a single experiment.

Materials in chemical or operation environments, such as electrodes in batteries, fuel cells, high-temperature reactors, electrolytes etc. The penetration and a well-collimated pencil beam allows focusing in the region and material of interest while it undergoes a chemical reaction. Study of 'thick' layers, such as oxidation of steel in its production and rolling process, which are too thick for classical reflectometry experiments.

Interfaces and layers in complicated environments, such as the intermetallic reaction of Zincalume surface coating on industrial steel in the liquid bath. In situ studies of industrial like strip casting processes for light metals. A casting setup can be set up on a beamline and probed with the HEX-ray beam in real time.

Bulk studies in single crystals differ from studies in surface-near regions limited by the penetration of conventional X-rays. It has been found and confirmed in almost all studies, that critical scattering and correlation lengths are strongly affected by this effect.

Combination of neutron and HEX-ray investigations on the same sample, such as contrast variations due to the different scattering lengths. Residual stress analysis in the bulk with unique spatial resolution in centimeter thick samples; in-situ under realistic load conditions. In-situ studies of thermo-mechanical deformation processes such as forging, rolling, and extrusion of metals.

Real time texture measurements in the bulk during a deformation, phase transition or annealing, such as in metal processing. Structures and textures of geological samples which may contain heavy elements and are thick. High resolution triple crystal diffraction for the investigation of single crystals with all the advantages of high penetration and studies from the bulk.

Compton spectroscopy for the investigation of momentum distribution of the valence electron shells. Imaging and tomography with high energies. Dedicated sources can be strong enough to obtain 3D tomograms in a few seconds.

Combination of imaging and diffraction is possible due to simple geometries. For example, tomography combined with residual stress measurement or structural analysis.

See also

Bremsstrahlung Cyclotron radiation Electromagnetic radiation Electron–positron annihilation Gamma ray Gamma-ray generation Ionization Synchrotron light source Synchrotron radiation X-radiation X-ray fluorescence X-ray generator X-ray tube

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376963831 under CC BY-SA 4.0; modifications have been made.

Words in each sectionApplicationsApplicationsApplications: 417 words417See alsoSee alsoSee also: 46 words46
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001376963831 · captured 2026-09-27 · ledger · version history

Cite this page as: encyclopegia.org, “High-energy X-rays”, snapshot enwiki-001376963831. https://encyclopegia.org/a/high-energy-x-rays

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.