Lesson plan

High-Speed Serial Interface

The High-Speed Serial Interface (HSSI) is a differential ECL serial interface standard developed by Cisco Systems and T3plus Networking primarily for use in WAN router connections. It is capable of speeds up to 52 Mbit/s with cables up to in length. While HSSI uses 50-pin connector physically similar to that used by SCSI-2, it requires a cable with an impedance of 110 Ω (as opposed to the 75 Ω of a SCSI-2 cable). The physical layer of the standard is defined by EIA-613 and the electrical layer by EIA-612. It is supported by the Linux kernel since version 3.4-rc2.

Back to article

Article summary

The High-Speed Serial Interface (HSSI) is a differential ECL serial interface standard developed by Cisco Systems and T3plus Networking primarily for use in WAN router connections. It is capable of speeds up to 52 Mbit/s with cables up to in length. While HSSI uses 50-pin connector physically similar to that used by SCSI-2, it requires a cable with an impedance of 110 Ω (as opposed to the 75 Ω of a SCSI-2 cable). The physical layer of the standard is defined by EIA-613 and the electrical layer by EIA-612. It is supported by the Linux kernel since version 3.4-rc2.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.