High-voltage interface relay

High voltage interface relays, a.k.a., interface relays: or coupling relays or insulating interfaces is a special class of electrical relays designed to provide informational and electrical compatibility between functional components…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

High voltage interface relays, a.k.a., interface relays: or coupling relays or insulating interfaces is a special class of electrical relays designed to provide informational and electrical compatibility between functional components isolated from each other and not allowing for a direct connection due to a high difference of potentials. A common design principle of these devices is a special galvanic isolation module between the input (control) and the output (switching) circuits of the relay.

Interface relays are widely used in control and protection systems of high voltage (10-100 kV) electronic and electrophysical equipment and in high power installations.

Classification

Any electromagnetic relay has a certain level of isolation between the input and output circuits. However, in ordinary relays, this function is not prevalent and, hence, not considered in the existing system of relay classification.

In interface relays, however, the property of galvanic isolation (decoupling) between the input and output circuits is significantly bolstered, and parameters of the galvanic isolation have an utmost importance from standpoint of the functions performed by this relay. On the other hand, the parameters associated with switching capacity are secondary and can significantly vary in interface relays with the same level of galvanic decoupling.

In this respect, categorization of interface relays into existing classes of ordinary relays is arguable. Rather, it seems more appropriate to categorize them as a separate class of electrical relays and classify according to characteristics of the galvanic decoupling unit by insulation voltage level: low level (to 10 kV) medium level (10 to 100 kV) high level (above 100 kV) by construction of galvanic isolation module: opto-electronic electromagnetic (transformer) pneumatic radio frequency ultrasonic electrohydrolic with mechanical transmission by operational (execution) speed: super fast (up to 100 μsec) fast (100 μsec to 3 ms) inertial (above 3 ms) Although such classification may seem arbitrary, it fully reflects the most important properties of interface relays that have a critical effect on the functions performed by them.

Opto-electronic interface relays

The developmental trends of interface relay technology suggest the use of opto-isolator as the prevailing design principle of interface relays. An opto-isolator can be implemented in terms of an LED and a phototransistor (or photothyristor or a photodiode) or a lamp and a photoresistor. An example of an opto-electronic interface relay is shown in the figure.

The transparent high voltage insulating barrier provides galvanic isolation of the circuits under the difference of potentials up to 5-7 kV. For higher voltages, they use an optical fiber, the length of which (depending on the voltage level) can take from dozens of centimeters to several meters.

Criticism It is agreed that the most important characteristic of opto-electronic systems is their noise robustness and insensitivity to electromagnetic fields. What is not considered, however, is that, in addition to the fiber optic line and the output actuator, such a system includes the source of light pulses on the transmitting side and the amplifier on the receiving side that are generally based on micro-circuitry.

It is precisely these elements, with low trigger levels, that get damaged by pulse noise (interference, voltage spikes and discharges) of the high voltage power equipment, which negates the main advantage of opto-electronic systems. Moreover, the optical fibers themselves are subject to a severe negative effect of ionizing radiation and external mechanical impacts (which is critically important in military applications).

The arrangement of input and output circuits of such systems needs to be widely spaced (requiring a lengthy optical fiber), which drives up the overall dimensions of interface unit. As such, the preferred use of an opto-electronic galvanic decoupling module in interface relays is not always warranted, and is merely the consequence of a stereotypical thinking of design engineers

Text derived from https://en.wikipedia.org/w/index.php?oldid=1313610777 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001313610777 · captured 1758942661.0 · version history

Cite this page as: encyclopegia.org, “High-voltage interface relay”, snapshot enwiki-001313610777. https://encyclopegia.org/a/high-voltage-interface-relay

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.