Hill yield criterion
The Hill yield criterion developed by Rodney Hill, is one of several yield criteria for describing anisotropic plastic deformations.
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Hill yield criterion developed by Rodney Hill, is one of several yield criteria for describing anisotropic plastic deformations. The earliest version was a straightforward extension of the von Mises yield criterion and had a quadratic form.
This model was later generalized by allowing for an exponent m. Variations of these criteria are in wide use for metals, polymers, and certain composites. F(\sigma_{22}-\sigma_{33})^2 + G(\sigma_{33}-\sigma_{11})^2 + H(\sigma_{11}-\sigma_{22})^2 + 2L\sigma_{23}^2 + 2M\sigma_{31}^2 + 2N\sigma_{12}^2 = 1 ~.
Here F, G, H, L, M, N are constants that have to be determined experimentally and \sigma_{ij} are the stresses. The quadratic Hill yield criterion depends only on the deviatoric stresses and is pressure independent. It predicts the same yield stress in tension and in compression.
(G + H)~(\sigma_1^y)^2 = 1 ~;~~ (F + H)~(\sigma_2^y)^2 = 1 ~;~~ (F + G)~(\sigma_3^y)^2 = 1 where \sigma_1^y, \sigma_2^y, \sigma_3^y are the normal yield stresses with respect to the axes of anisotropy. Therefore, we have F = \cfrac{1}{2}\left[\cfrac{1}{(\sigma_2^y)^2} + \cfrac{1}{(\sigma_3^y)^2} - \cfrac{1}{(\sigma_1^y)^2}\right] G = \cfrac{1}{2}\left[\cfrac{1}{(\sigma_3^y)^2} + \cfrac{1}{(\sigma_1^y)^2} - \cfrac{1}{(\sigma_2^y)^2}\right] H = \cfrac{1}{2}\left[\cfrac{1}{(\sigma_1^y)^2} + \cfrac{1}{(\sigma_2^y)^2} - \cfrac{1}{(\sigma_3^y)^2}\right] Similarly, if \tau_{12}^y, \tau_{23}^y, \tau_{31}^y are the yield stresses in shear (with respect to the axes of anisotropy), we have L = \cfrac{1}{2~(\tau_{23}^y)^2} ~;~~ M = \cfrac{1}{2~(\tau_{31}^y)^2} ~;~~ N = \cfrac{1}{2~(\tau_{12}^y)^2} \sigma_1^2 + \cfrac{R_0~(1+R_{90})}{R_{90}~(1+R_0)}~\sigma_2^2 - \cfrac{2~R_0}{1+R_0}~\sigma_1\sigma_2 = (\sigma_1^y)^2 where the principal stresses \sigma_1, \sigma_2 are assumed to be aligned with the axes of anisotropy with \sigma_1 in the rolling direction and \sigma_2 perpendicular to the rolling direction, \sigma_3 = 0 , R_0 is the R-value in the rolling direction, and R_{90} is the R-value perpendicular to the rolling direction.
For the special case of transverse isotropy we have R=R_0 = R_{90} and we get \sigma_1^2 + \sigma_2- \cfrac{2~R}{1+R}~\sigma_1\sigma_2 = (\sigma_1^y)^2 & + M|2\sigma_2 - \sigma_3 - \sigma_1|^m + N|2\sigma_3 - \sigma_1 - \sigma_2|^m = \sigma_y^m ~. \end{align} where \sigma_i are the principal stresses (which are aligned with the directions of anisotropy), \sigma_y is the yield stress, and F, G, H, L, M, N are constants. The value of m is determined by the degree of anisotropy of the material and must be greater than 1 to ensure convexity of the yield surface.
For transversely isotropic materials with 1-2 being the plane of symmetry, the generalized Hill yield criterion reduces to (with F=G and L=M ) \begin{align} f := & F|\sigma_2-\sigma_3|^m + G|\sigma_3-\sigma_1|^m + H|\sigma_1-\sigma_2|^m + L|2\sigma_1 - \sigma_2 - \sigma_3|^m \\ & + L|2\sigma_2-\sigma_3-\sigma_1|^m + N|2\sigma_3-\sigma_1-\sigma_2|^m - \sigma_y^m \le 0 \end{align} The R-value or Lankford coefficient can be determined by considering the situation where \sigma_1 > (\sigma_2 = \sigma_3 = 0) . The R-value is then given by R = \cfrac{(2^{m-1}+2) L - N + H}{(2^{m-1} - 1) L + 2 N + F} ~.
Under plane stress conditions and with some assumptions, the generalized Hill criterion can take several forms. Case 1: L = 0, H = 0. f:= \cfrac{1+2R}{1+R}(|\sigma_1|^m + |\sigma_2|^m) - \cfrac{R}{1+R} |\sigma_1 + \sigma_2|^m - \sigma_y^m \le 0 Case 2: N = 0, F = 0. f:= \cfrac{2^{m-1}(1-R)+(R+2)}{(1-2^{m-1})(1+R)}|\sigma_1 -\sigma_2|^m - \cfrac{1}{(1-2^{m-1})(1+R)} (|2\sigma_1 - \sigma_2|^m + |2\sigma_2-\sigma_1|^m)- \sigma_y^m \le 0 Case 3: N = 0, H = 0. f:= \cfrac{2^{m-1}(1-R)+(R+2)}{(2+2^{m-1})(1+R)}(|\sigma_1|^m -|\sigma_2|^m) + \cfrac{R}{(2+2^{m-1})(1+R)} (|2\sigma_1 - \sigma_2|^m + |2\sigma_2-\sigma_1|^m)- \sigma_y^m \le 0 Case 4: L = 0, F = 0. f:= \cfrac{1+2R}{2(1+R)}|\sigma_1 - \sigma_2|^m + \cfrac{1}{2(1+R)} |\sigma_1 + \sigma_2|^m - \sigma_y^m \le 0 Case 5: L = 0, N = 0. .
This is the Hosford yield criterion. f := \cfrac{1}{1+R}(|\sigma_1|^m + |\sigma_2|^m) + \cfrac{R}{1+R}|\sigma_1-\sigma_2|^m - \sigma_y^m \le 0 Care must be exercised in using these forms of the generalized Hill yield criterion because the yield surfaces become concave (sometimes even unbounded) for certain combinations of R and m . \left(\cfrac{\sigma_1}{\sigma_0}\right)^2 + \left(\cfrac{\sigma_2}{\sigma_{90}}\right)^2 + \left[ (p + q - c) - \cfrac{p\sigma_1+q\sigma_2}{\sigma_b}\right]\left(\cfrac{\sigma_1\sigma_2}{\sigma_0\sigma_{90}}\right) = 1 where \sigma_0 is the uniaxial tensile yield stress in the rolling direction, \sigma_{90} is the uniaxial tensile yield stress in the direction normal to the rolling direction, \sigma_b is the yield stress under uniform biaxial tension, and c, p, q are parameters defined as \begin{align} c & = \cfrac{\sigma_0}{\sigma_{90}} + \cfrac{\sigma_{90}}{\sigma_0} - \cfrac{\sigma_0\sigma_{90}}{\sigma_b^2} \\ \left(\cfrac{1}{\sigma_0}+\cfrac{1}{\sigma_{90}}-\cfrac{1}{\sigma_b}\right)~p & = \cfrac{2 R_0 (\sigma_b-\sigma_{90})}{(1+R_0)\sigma_0^2} - \cfrac{2 R_{90} \sigma_b}{(1+R_{90})\sigma_{90}^2} + \cfrac{c}{\sigma_0} \\ \left(\cfrac{1}{\sigma_0}+\cfrac{1}{\sigma_{90}}-\cfrac{1}{\sigma_b}\right)~q & = \cfrac{2 R_{90} (\sigma_b-\sigma_{0})}{(1+R_{90})\sigma_{90}^2} - \cfrac{2 R_{0} \sigma_b}{(1+R_{0})\sigma_{0}^2} + \cfrac{c}{\sigma_{90}} \end{align} and R_0 is the R-value for uniaxial tension in the rolling direction, and R_{90} is the R-value for uniaxial tension in the in-plane direction perpendicular to the rolling direction. F (\sigma_{22}-\sigma_{33})^2 + G (\sigma_{33}-\sigma_{11})^2 + H (\sigma_{11}-\sigma_{22})^2 + 2 L \sigma_{23}^2 + 2 M \sigma_{31}^2 + 2 N\sigma_{12}^2 + I \sigma_{11} + J \sigma_{22} + K \sigma_{33} = 1~.
F (\sigma_{22}-\sigma_{33})^2 + G (\sigma_{33}-\sigma_{11})^2 + H (\sigma_{11}-\sigma_{22})^2 + 2 L \sigma_{23}^2 + 2 M \sigma_{31}^2 + 2 N\sigma_{12}^2 + K (\sigma_{11} + \sigma_{22} + \sigma_{33})^2 = 1~. Yield criteria for aluminum
Text derived from https://en.wikipedia.org/w/index.php?oldid=1356227964 under CC BY-SA 4.0; modifications have been made.