Lesson plan

HIMEM.SYS

HIMEM.SYS is a DOS device driver which allows DOS programs to store data in extended memory according to the Extended Memory Specification (XMS). The memory beyond the first 1 MB of address space is required by Windows 9x/Me in order to load; therefore, these versions of Microsoft Windows require HIMEM.SYS to be loaded to be able to run. HIMEM.SYS was first included with Windows 2.1 (1988). In MS-DOS 5.0 (1991) and later, HIMEM.SYS can be used to load the DOS kernel code into the High Memory Area (HMA) to increase the amount of available conventional memory by specifying DOS=HIGH in CONFIG.SYS . In DR DOS 5.0 (1990) and 6.0 (1991), the driver is named HIDOS.SYS rather than HIMEM.SYS , like the corresponding DCONFIG.SYS or CONFIG.SYS directive HIDOS=ON . In FreeDOS, the matching file is named HIMEMX.EXE and can be loaded from the FreeDOS configuration file named FDCONFIG.SYS or CONFIG.SYS . It is also plug compatible with MS-DOS HIMEM.SYS, offering additional control parameters. In Windows 3.1 and Windows 9x, there is also a command-line loadable version of HIMEM.SYS called XMSMMGR.EXE. It can load extended memory services after the system boots into the command prompt. This allows Windows Setup to load even if HIMEM.SYS is not loaded. The hard bug exists in recent versions of HIMEM.SYS from MS-DOS and Windows 9x for handling /a20control:off option causing a hang-up.…

Back to article

Article summary

HIMEM.SYS is a DOS device driver which allows DOS programs to store data in extended memory according to the Extended Memory Specification (XMS). The memory beyond the first 1 MB of address space is required by Windows 9x/Me in order to load; therefore, these versions of Microsoft Windows require HIMEM.SYS to be loaded to be able to run. HIMEM.SYS was first included with Windows 2.1 (1988). In MS-DOS 5.0 (1991) and later, HIMEM.SYS can be used to load the DOS kernel code into the High Memory Area (HMA) to increase the amount of available conventional memory by specifying DOS=HIGH in CONFIG.SYS . In DR DOS 5.0 (1990) and 6.0 (1991), the driver is named HIDOS.SYS rather than HIMEM.SYS , like the corresponding DCONFIG.SYS or CONFIG.SYS directive HIDOS=ON . In FreeDOS, the matching file is named HIMEMX.EXE and can be loaded from the FreeDOS configuration file named FDCONFIG.SYS or CONFIG.SYS . It is also plug compatible with MS-DOS HIMEM.SYS, offering additional control parameters. In Windows 3.1 and Windows 9x, there is also a command-line loadable version of HIMEM.SYS called XMSMMGR.EXE. It can load extended memory services after the system boots into the command prompt. This allows Windows Setup to load even if HIMEM.SYS is not loaded. The hard bug exists in recent versions of HIMEM.SYS from MS-DOS and Windows 9x for handling /a20control:off option causing a hang-up.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.