---
title: Host controller interface (USB, Firewire)
slug: host-controller-interface-usb-firewire
qid: 
snapshot: enwiki-001362919630
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1362919630
tags: [20358204, 22937836, 23118434, 23142720, 23195314, 23273547, 23603337, 24745107, 24745114, 24745122, 26748027, 28493674, 73108248]
---

# Host controller interface (USB, Firewire)

> [!note] Provenance
> Snapshot `enwiki-001362919630` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1362919630> · Licensed CC BY-SA 4.0

A USB and Firewire Host Controller Interface (UFHC) is a register-level interface that enables a host controller for USB or IEEE 1394 hardware to communicate with a host controller driver in software. The driver software is typically provided with an operating system of a personal computer, but may also be implemented by application-specific devices such as a microcontroller. On the expansion card or motherboard controller, this involves much custom logic, with digital logic engines in the motherboard's controller chip, plus analog circuitry managing the high-speed differential signals. On the software side, it requires a device driver (called a Host Controller Driver, or HCD).

A USB and Firewire Host Controller Interface (UFHC) is a register-level interface that enables a host controller for USB or IEEE 1394 hardware to communicate with a host controller driver in software. The driver software is typically provided with an operating system of a personal computer, but may also be implemented by application-specific devices such as a microcontroller. On the expansion card or motherboard controller, this involves much custom logic, with digital logic engines in the motherboard's controller chip, plus analog circuitry managing the high-speed differential signals. On the software side, it requires a device driver (called a Host Controller Driver, or HCD). ==IEEE 1394== === Open Host Controller Interface=== Open Host Controller Interface (OHCI) is an open standard. When applied to an IEEE 1394 (also known as FireWire; i.LINK or Lynx) card, OHCI means that the card supports a standard interface to the PC and can be used by the OHCI IEEE 1394 drivers that come with all modern operating systems. Because the card has a standard OHCI interface, the OS does not need to know in advance exactly who makes the card or how it works; it can safely assume that the card understands the set of well-defined commands that are defined in the standard protocol. ==USB== ===Open Host Controller Interface=== The OHCI standard for USB is similar to the OHCI standard for IEEE 1394, but supports USB 1.1 (full and low speeds) only; so as a result its register interface looks completely different. Compared with UHCI, it moves more intelligence into the controller, and thus is accordingly much more efficient; this was part of the motivation for defining it. If a computer provides non-x86 USB 1.1, or x86 USB 1.1 from a USB controller that is not made by Intel or VIA, it probably uses OHCI (e.g. OHCI is common on add-in PCI Cards based on an NEC chipset). It has many fewer intellectual property restrictions than UHCI. It only supports 32-bit memory addressing, so it requires an IOMMU or a computationally expensive bounce buffer to work with a 64-bit operating system. OHCI interfaces to the rest of the computer only with memory-mapped I/O. ===USB4 Host Interface=== The USB4 Host Interface defined in the USB4 Specification. It makes operating system to manage USB4 Host Route for USB, DisplayPort, PCI Express, Thunderbolt or Host-to-Host Communication. ==See also== Advanced Host Controller Interface (AHCI) Non-Volatile Memory Host Controller Interface (NVMHCI) Wireless USB (WHCI 1.0) RAID Controller Host adapter LPCIO ==References== ==External links== An OHCI for USB standard document from Compaq, Microsoft and National Semiconductor Linux kernel source: OHCI and EHCI documentation Intel EHCI Specification Intel xHCI Specification
