Hot shrinking

Hot shrinking is a process in car bodyworks.

Uses your system voice; voice and rate in settings.

≈ 1 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Hot shrinking is a process in car bodyworks. As the name suggests, heat will be involved, while "shrinking" is the process of straightening a metal section. This is a method of panel beating where a panel is first heated to make it softer. In most cases, heating will be done by use of the oxyacetylene flame.

Hot shrinking process

Locate the highest point of the panel, light the torch and heat the spot to a cherry red. Strike the area using a mallet around the heat spot. After several blows the sop will turn black, quench it immediately with a damp cloth. Repeat the process around the heated spot until the stretched part becomes fully shrunk.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351282176 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001351282176 · captured 2026-04-26 · ledger · version history

Cite this page as: encyclopegia.org, “Hot shrinking”, snapshot enwiki-001351282176. https://encyclopegia.org/a/hot-shrinking

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.