Lesson plan

HP-55

The HP-55 was a programmable handheld calculator, a lower-cost alternative to the HP-65. Introduced by Hewlett-Packard in 1975, it featured twenty storage registers and room for 49 keystroke instructions. Its outward appearance was similar to the HP-65, but its silver band went through between the display and the keyboard like HP-45, and the functions of some keys were different from HP-65, and it did not have a magnetic card reader/writer. Like all Hewlett-Packard calculators of the era and most since, the HP-55 used Reverse Polish Notation (RPN) and a four-level automatic operand stack. Another feature of the HP-55 was that it officially featured a stop-watch function much similar to the hidden stop-watch function of the earlier HP-45 calculator. This stop-watch function could be accessed by setting the mode-slider to the Timer position. A quartz-crystal inside the calculator provided an accurate timebase, and it was advertised that the timer ran with as little as +/- 0.01% error. The data format used by the stop-watch consisted of a combination of units (Hours, Minutes and Seconds), but the HP-55 featured a special conversion function to convert between this format and a pure unit (Hours). Because of this, data from the stop-watch could easily be used right away in calculations.…

Back to article

Article summary

The HP-55 was a programmable handheld calculator, a lower-cost alternative to the HP-65. Introduced by Hewlett-Packard in 1975, it featured twenty storage registers and room for 49 keystroke instructions. Its outward appearance was similar to the HP-65, but its silver band went through between the display and the keyboard like HP-45, and the functions of some keys were different from HP-65, and it did not have a magnetic card reader/writer. Like all Hewlett-Packard calculators of the era and most since, the HP-55 used Reverse Polish Notation (RPN) and a four-level automatic operand stack. Another feature of the HP-55 was that it officially featured a stop-watch function much similar to the hidden stop-watch function of the earlier HP-45 calculator. This stop-watch function could be accessed by setting the mode-slider to the Timer position. A quartz-crystal inside the calculator provided an accurate timebase, and it was advertised that the timer ran with as little as +/- 0.01% error. The data format used by the stop-watch consisted of a combination of units (Hours, Minutes and Seconds), but the HP-55 featured a special conversion function to convert between this format and a pure unit (Hours). Because of this, data from the stop-watch could easily be used right away in calculations.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.