Lesson plan

HP-75

The HP-75C and HP-75D were hand-held computers programmable in BASIC, made by Hewlett-Packard from 1982 to 1986. The HP-75 had a single-line liquid crystal display, 48 KiB system ROM and 16 KiB RAM, a comparatively large keyboard (albeit without a separate numeric pad), a manually operated magnetic card reader (2×650 bytes per card), 4 ports for memory expansion (1 for RAM and 3 for ROM modules), and an HP-IL interface that could be used to connect printers, storage and electronic test equipment. The BASIC interpreter also acted as a primitive operating system, providing file handling capabilities for program storage using RAM, cards, or cassettes/diskettes (via HP-IL). The HP-75 measures 10.1 x 4.9 x 1.5 inches. Other features included a text editor as well as an appointment reminder with alarms, similar to functions of modern PDAs. The HP-75D (1984–1986) added a port for a bar code wand, often used for inventory control tasks. The HP-75 was comparatively expensive with an MSRP of $995 ( ) for the 75C or $1,095 ( ) for the 75D, making it less popular than the cheaper successor model, the HP-71B. The HP-75C has a KANGAROO printed on its PCB, as its codename (see link for picture). HP-75D codename's is MERLIN.

Back to article

Article summary

The HP-75C and HP-75D were hand-held computers programmable in BASIC, made by Hewlett-Packard from 1982 to 1986. The HP-75 had a single-line liquid crystal display, 48 KiB system ROM and 16 KiB RAM, a comparatively large keyboard (albeit without a separate numeric pad), a manually operated magnetic card reader (2×650 bytes per card), 4 ports for memory expansion (1 for RAM and 3 for ROM modules), and an HP-IL interface that could be used to connect printers, storage and electronic test equipment. The BASIC interpreter also acted as a primitive operating system, providing file handling capabilities for program storage using RAM, cards, or cassettes/diskettes (via HP-IL). The HP-75 measures 10.1 x 4.9 x 1.5 inches. Other features included a text editor as well as an appointment reminder with alarms, similar to functions of modern PDAs. The HP-75D (1984–1986) added a port for a bar code wand, often used for inventory control tasks. The HP-75 was comparatively expensive with an MSRP of $995 ( ) for the 75C or $1,095 ( ) for the 75D, making it less popular than the cheaper successor model, the HP-71B. The HP-75C has a KANGAROO printed on its PCB, as its codename (see link for picture). HP-75D codename's is MERLIN.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.