Hudson Wasp
car model
≈ 7 min read
Names in other languages
- DeutschHudson Wasp
- EnglishHudson Wasp
- FrançaisHudson Wasp
- MagyarHudson Wasp
- ItalianoHudson Wasp
- NederlandsHudson Wasp
- PolskiHudson Wasp
- РусскийHudson Wasp
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Hudson Wasp is an automobile built and marketed by the Hudson Motor Car Company of Detroit, Michigan, from 1952 through the 1956 model years. After Hudson merged with Nash Motors, the Wasp was then built by American Motors Corporation (AMC) in Kenosha, Wisconsin, and marketed under its Hudson marque for model years 1955 and 1956.
Two distinct generations of the Hudson Wasp can be identified: from 1952 to 1954, when it used Hudson's existing short-wheelbase platform, and in 1955 and 1956, when it was built on the full-sized Nash platform. The two generations differed in their platform designs, engine options, and body styles. The second generation also received unique styling for each of its two model years.
1952
The Wasp (Series 58) was introduced by Hudson for the 1952 model year as an upgraded version of the Hudson Pacemaker, replacing the Hudson Super Custom models from 1951. The Wasp was available as a two- and four-door sedan, a convertible, and a two-door hardtop, designated the Hollywood.
The new models were shorter than the Hudson Hornet, and positioned as a "lower-priced running mate" to follow the sales success of the 1951 Hornet. The Wasp featured the unitized, "Monobilt" step-down chassis design with a wheelbase and overall length.
The structure used a perimeter frame, providing a rigid structure, low center of gravity, and side-impact protection for passengers, including a box-section steel girder outside the rear wheels. The Wasp's wheelbase was same as the lower-priced Pacemaker, shorter than the Hornet, but the exterior trim and interior appointments like on the top-level Hornet.
Standard features for 1952 included the model name on the front fenders, which began the full-length stainless steel body side molding, illuminated medallion in the front grille, rear bumper guard for the license plate and concealed light, a carpeted trunk with an upright-mounted spare tire, a 30-hour mechanical clock on the dashboard, illuminated ignition switch keyway, and the interior featuring tan cord upholstery with red and brown wide and narrow stripes as well as hand grips, ash tray, robe cord, and a large magazine pocket for rear seat passengers. The Wasp's engine was the L-head I6 rated at that was also used in the Hudson Commodore.
Manual transmission was standard with overdrive optional, or the Hydramatic transmission from General Motors.
1953
Hudson's large-car line for 1953 was introduced in November 1952. However, the automaker focused on introducing its new compact-sized car, the Jet, which was unveiled in December 1952. Hudson's large cars were carryovers, but the automaker added an upper-level Super Wasp line that replaced the discontinued "Commodore 6" models.
This model continued the improved interior materials and a more powerful Hudson I6 engine. The Super Wasp was offered in additional body styles: as a two-door "Hollywood" (pillar-less) hardtop and a "Brougham" convertible, of which 50 were made. The base Wasp was repositioned and priced lower to replace the discontinued "Pacemaker" models.
The base Hudson Wasp used the L-Head I6 from the discontinued Pacemaker. The Super Wasp included Hudson's L-Head I6 with a single two-barrel carburetor. This engine was rated at (with a single two-barrel carburetor) while the top-of-the-line Commodore Custom Eight's I8 was rated at .
The Super Wasp's power was underrated, so it would not surpass the flagship straight-eight engine. The narrow-block engine was the basis for the stroked and reinforced Hornet I6 engine, introduced in 1951, which dominated NASCAR racing from 1952 until 1954. The Super Wasp was also offered with an aluminum "twin H" manifold and twin two-barrel carburetors.
Super Wasp performance with the "twin H" induction matched the performance of the big two-barrel equipped, but heavier, Hudson Hornet. Wasp model-year production totaled 21,876 units in 1953.
Moreover, the decline in Hudson sales was due to the lack of a V8 engine in its full-sized models and to the lack of annual styling enhancements offered by the domestic Big Three automakers (General Motors, Ford, and Chrysler) that attracted buyers. While the new compact-sized Hudson Jet models were well-built and well-equipped, following the successful formula of the Nash Rambler, the costs of development and the styling of the small Hudson irreparably damaged the company.
Moreover, the sales war between Ford and Chevrolet during 1953 negatively impacted the sales and profitability of Hudson as well as the other "independent" automakers. Discussions began to merge Nash and Hudson. The objective was to reduce costs and strengthen the sales organizations to meet the intense competition from domestic Big Three automakers.
1954
For the 1954 model year, Hudson reskinned its senior line of large cars (Hornet, Super Wasp, and Wasp) to give them a more contemporary look. The full-sized Hudson models now had a new linear front-to-rear body design for the 1954 model year. This was an expensive undertaking, given the unibody design of the Hudson vehicles.
The basic roofline of the sedans indicated the continuation of the unibody, and the drivetrain was unchanged. The hardtops and coupes featured new rooflines. The front end was restyled with a simpler grille, a functional hood scoop, and a new one-piece curved windshield.
The formerly sloped rear end was squared off to the rear fender, which featured new, high-mounted, larger taillamps. The exterior changes made the Hudsons look longer, while the interiors were updated with new dashes and instrument clusters. The dealer introduction date was on 2 October 1953.
The 1954 Wasps were available in a two-door coupe or sedan as well as a four-door sedan, while the Super Wasp also offered a two-door "Hollywood" (pillar-less) hardtop and a "Brougham" convertible. Hudson also simplified the 1954 model year full-size cars, introducing the longer-wheelbase Hornet with a I6 engine, while the Wasp models continued the wheelbase.
The standard engine on the Super Wasp was the I6 producing of torque. An optional aluminum cylinder head with a 7.5-to-1 compression ratio rated at . A Twin H-Power version developing was also available.
The I6 engine was standard on the Wasp, with an available version featuring an aluminum cylinder head and a 7.5-to-1 compression ratio. All Hudson engines were "Instant Action with Super Induction" to describe the L-head engine upgrades for 1954. After approval from the boards and shareholders, Hudson officially merged with Nash-Kelvinator Corporation on 1 May 1954.
On 2 October 1954, the last "true" Hudson was built in Detroit. A total of 11,603 Wasps Wasps were produced in 1954.
Racing
A Hudson Wasp competed in the grueling 1954 Carrera Panamericana race held from 19 until 23 November. It was held in eight stages over . Malcolm C. Eckart and Carroll Hamplemann drove their #219 car for 23 hours and 28 minutes to finish in eleventh place in the stock car class (Tourismo Especial).
Of the 150 cars that started this race, only 85 finished all eight stages, and several drivers died in crashes. The 1954 event was the last road race of its kind, one of the motorsport's most challenging and dangerous.
Australian assembly
The Wasp was assembled in Australia from complete knock down (CKD) kits.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1352913880 under CC BY-SA 4.0; modifications have been made.