Humbucker

copy A humbucker, humbucking pickup, or double coil, is a guitar pickup that uses two wire coils to cancel out noisy interference from coil pickups.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

copy A humbucker, humbucking pickup, or double coil, is a guitar pickup that uses two wire coils to cancel out noisy interference from coil pickups. Humbucking coils are also used in dynamic microphones to cancel electromagnetic hum. Humbuckers are one of two main types of guitar pickups.

The other is called a single coil. The origins of the hot rail/blade design are contested, with Joe Barden being quoted in Jan 1989 Guitar World magazine as claiming to have invented the design in late 1983. The US patent for the L-500 attributes the hot rail design to Bill Lawrence.

Two flat vertical magnetically conductive blades are placed side by side within half the width of a typical fender strat or telecaster-sized single coil. Both blades or rails pass under all strings and are placed lengthwise, each with its own winding around one rail or blade, and a magnet is placed directly under and contacting the two blades.

Similar to full- or double-size hum-bucking designs, one coil is reverse wound to cancel hum.

Rail humbuckers (full size)

Another design known as the rail humbucker features a single magnetic component spanning across the entire string width of the instrument. These pickups are similar in size to single and double coil pickups, replacing the 6 slugs/magnets per coil.

This is sometimes expanded into a double-sized quadrail, or double humbucker, effectively combining 4 coils connected together to produce an extremely high-output pickup. The Kent Armstrong Motherbucker is an example of such an overpowered pickup. The same type of rails can also be found in a normal-sized humbucker.

Heavy metal guitarist Dimebag Darrell made heavy use of this type of pickup wired in the bridge position. These tend to have a higher output and bass response than the single-coil-sized versions. DiMarzio has designed and sold many such pickups.

Coil splitting and coil taps

Some guitars that have humbucking pickups feature coil splits, which allow the pickups to act as pseudo-single coils by either short-circuiting or bypassing one coil. The electrical circuit of the pickup is reduced to that of a true single coil so there is no hum-canceling effect.

Usually, this feature is activated using a miniature toggle switch or a DPDT push-pull switch mounted on a potentiometer. Some guitars (e.g., the Peavey T-60 and the Fender Classic Player Jaguar HH) make use of a variable coil split circuit that allows the guitarist to dial a variable amount of signal from the second coil, from purely single coil to full humbucker and everything in-between.

A similar option is a series/parallel switch, which, in one position, causes the coils to be connected in parallel rather than in series. This retains the humbucker's noise-cancellation properties and gives a sound closer to that of two single-coil pickups used together. Coil splitting is often wrongly referred to as a coil tapping.

Coil taps are most commonly found on single coil pickups, and involve adding an extra hook-up wire during manufacture of the pickup so the guitarist can choose to have all the windings of the pickup included in the circuit, for a fatter, higher output sound with more midrange, or switch the output to 'Tap' into the windings at a point less than the full coil for a brighter, lower-output and cleaner sound. For example, a full pickup coil may be 10,000 turns of wire and the tap may be at 8,000 turns.

Because of the confusion between coil splits and coil taps—and the rarity of coil taps in general—it is difficult to find tappable single-coil pickups for sale. However, pickup manufacturer Seymour Duncan offers tapped versions of many of their Telecaster and Stratocaster pickups.

The split single coil may bear little resemblance to popular single coil pickups such as those made by Fender and the P-90 made by Gibson, owing to other differences in pickup construction.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378448964 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

9 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.