Humidifier

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A humidifier is a household appliance or device designed to increase the moisture level in the air within a room or an enclosed space. It achieves this by emitting water droplets or steam into the surrounding air, thereby raising the humidity. In the home, point-of-use humidifiers are commonly used to humidify a single room, while whole-house or furnace humidifiers, which connect to a home's HVAC system, provide humidity to the entire house. Medical ventilators often include humidifiers for increased patient comfort. Large humidifiers are used in commercial, institutional, or industrial contexts, often as part of a larger HVAC system.

A humidifier is a household appliance or device designed to increase the moisture level in the air within a room or an enclosed space. It achieves this by emitting water droplets or steam into the surrounding air, thereby raising the humidity. In the home, point-of-use humidifiers are commonly used to humidify a single room, while whole-house or furnace humidifiers, which connect to a home's HVAC system, provide humidity to the entire house. Medical ventilators often include humidifiers for increased patient comfort. Large humidifiers are used in commercial, institutional, or industrial contexts, often as part of a larger HVAC system.

Overview

Humidification calculation

in a space without windows.]] Humidity per hour: X = Air changes per hour (ACPH) * M³ * density of air * humidity ratio Humidity per day: X * 24 The air changes per hour (ACPH) ranges widely, based on: Ventilation: Values may be obtained from the HVAC maintainer that routinely (typically every third year or so) tests the ventilation of the residence. Insulation leakage: Measured with a standard blower door test. Cubic meters: The volume of the room, excluding the bathroom that should be kept closed since it ventilates humidity. Density of air: Typically 1.2 kg/m 3 for dry air. Humidity Current relative humidity: 20% Humidity needed to reach 55%: 35% Humidity ratio for 35%: 0.0051 For example, a typical modern apartment of with closed windows (wood isolation) may consume to raise the relative humidity from 20% to 55%: 24 * 1.53 L/h (2 * 1 × 125 m 3 × 1.2 kg/m 3 × 0.0051): Air changes per hour Ventilation: 2 Insulation leakage: 1 (a few windows) Cubic meters: 125 m 3 (50 m 2 * 2.5 m height) Density of air: Typically 1.2 kg/m 3 for dry air. Humidity Current relative humidity: 20% Humidity needed to reach 55%: 35% Humidity ratio for 35%: 0.0051

Prevention of low indoor humidity

Low humidity may occur in hot, dry desert climates, or indoors in artificially heated spaces. In winter, especially when cold outside air is heated indoors, the humidity may drop to as low as 10–20%. A relative humidity of 30% to 50% is recommended for most homes.

Health treatment

Prevention of dermatitis: Low humidity can cause adverse health effects and may cause atopic dermatitis, and seborrhoeic dermatitis. Management of hair loss: Commonly, patients with seborrhoeic dermatitis experience mild redness, scaly skin lesions and in some cases hair loss. Prevention of dry mucous membranes and cough: drying out mucous membranes such as the lining of the nose and throat may lead to a snoring problem, and can cause respiratory distress. Prevention of dry eye syndrome. Improved apparent temperature: The heat index and humidex measure the effect of humidity on the perception of temperatures above . In humid conditions, the air feels much hotter, because less perspiration evaporates from the skin.

Improved climate for material

Low humidity can affect wooden furniture, causing shrinkage and loose joints or cracking of pieces. Books, papers, and artworks may shrink or warp and become brittle in very low humidity. In addition, static electricity may become a problem in conditions of low humidity, destroying semiconductor devices, causing static cling of textiles, and causing dust and small particles to stick stubbornly to electrically charged surfaces.

Negative impact of overuse of humidifiers

An indoor relative humidity of less than 51% resulted in significant reductions in mite and allergen levels. Overuse of a humidifier can raise the relative humidity to excessive levels, promoting the growth of dust mites and mold, and can also cause hypersensitivity pneumonitis (humidifier lung). A properly installed and located hygrostat should be used to monitor and control humidity levels automatically, or a well-informed and conscientious human operator must constantly check for correct humidity levels. A humidity below 50% can prevent water condensation on building materials. A dehumidifier can be used to balance the humidity.

Common sources

Human water losses, both respiratory, and insensible water loss like sweat, range in average 0.75 L/d in sedentary adults. However, most people do not spend most of the day at home. Houseplants may also be used as natural humidifiers, especially if they are placed in fabric flowerpots, since they evaporate water into the air through transpiration. Care must still be taken to prevent bacteria or mold in the soil from growing to excessive levels, or from dispersing into the air. The presence of sciarids (like fungus gnats) in houseplants may indicate overwatering. Hanging laundry will increase the humidity.

Homemade

One type of evaporative humidifier makes use of just a reservoir and wick. Sometimes called a "natural humidifier", these are usually non-commercial devices that can be assembled at little or no cost. One version of a natural humidifier uses a stainless steel bowl, partially filled with water, covered by a towel. A waterproof weight is used to sink the towel in the center of the bowl. There is no need for a fan, because the water spreads through the towel by capillary action and the towel surface area is large enough to provide for rapid evaporation. The stainless steel bowl is much easier to clean than typical humidifier water tanks. This, in combination with daily or every other day replacement of the towel and periodic laundering, can control the problem of mold and bacteria.

Electric humidifiers

Steam Humidifiers

Steam humidifiers, or warm mist humidifiers, are equipped with a heating element. A medicated inhalant can also be added to the steam vapor to help reduce cough. Vaporizers may be healthier than cool mist types of humidifiers because steam is less likely to convey mineral impurities or microorganisms from the standing water in the reservoir. However, boiling water requires significantly more energy than other techniques. The heat source in poorly designed humidifiers can overheat, causing the product to melt, leak, and start fires.

Maintenance

A torx screwdriver is often needed to open consumer electronics. Humidifiers with a centrifugal fan may become noisy due to build up which cannot effectively be removed with vinegar for example. However, the fan can be replaced, and the model name of the fan and its specifications can be figured out by disassembling the humidifier and detaching it.

External links

EPA.gov Indoor Air Facts No. 8 Use and Care of Home Humidifiers

Text derived from https://en.wikipedia.org/w/index.php?oldid=1359359554 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.