Humphrey pump

The Humphrey pump is a large internal combustion gas-fueled liquid piston pump.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Humphrey pump is a large internal combustion gas-fueled liquid piston pump. The pump was invented by H. A. Humphrey and first presented in paper to the Institution of Mechanical Engineers on 19 November 1909.

A pump capable of pumping 250,000 gallons per hour to a head of 35 feet was exhibited at the 1910 Brussels Exhibition, where it was awarded two Grands Prix, for both engines and pumps. A small number of pumps were built between 1906 and 1925 for use in large-scale water supply projects. Although only a few pumps were built, some continued in service into the 1960s.

Limitations and advantages

The main limitation of the Humphrey pump is that it has no suction capacity, in fact it must be installed in a dry sump several meters below the supply level. Given the pump's physical size and the need to protect the equipment against flood events, this is no small engineering exercise, requiring (in the Cobdogla example) several thousand tons of concrete.

Its advantages however are: with no moving parts except for the dozens of spring-loaded inlet valves, it has low maintenance and high reliability. The Humphrey pump's efficiency was also good by the standards of the time.

The demonstration pump exhibited at the Brussels exhibition was tested by Prof W.C Unwin in 1909 and was found to require around 33% less fuel gas than would have been consumed had contemporary gas burning engines been used drive pumps moving the same amount of water to the same height.

Proposed installations

A very large drainage and irrigation plant for Egypt was also considered in 1914. Construction of this was disrupted, owing to the outbreak of World War I. It was originally to use eighteen pumps, each delivering 100,000,000 gallons per day to a head of 20 feet. Each pump chamber was to be 8 ft 8 in in diameter and 14 ft high. Final construction would have used ten pumps, five by Beardmore's and five by the Italian division of Brown Boveri.

Cobdogla Irrigation and Steam Museum, South Australia

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345159112 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

9 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.