Hunter–Saxton equation
integrable PDE
≈ 6 min read
Names in other languages
- EspañolEcuación de Hunter–Saxton
- myဟန်တာ-ဆက်စ်တန် ညီမျှခြင်း
- eoekvacio de Hunter-Saxton
- SvenskaHunter–Saxtons ekvation
- EnglishHunter–Saxton equation
- العربيةمعادلة هنتر-ساكستون
- 中文亨特 - 萨克斯顿方程
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In mathematical physics, the Hunter–Saxton equation : (u_t + u u_x)_x = \frac{1}{2} \, u_x^2 is an integrable PDE that arises in the theoretical study of nematic liquid crystals. If the molecules in the liquid crystal are initially all aligned, and some of them are then wiggled slightly, this disturbance in orientation will propagate through the crystal, and the Hunter–Saxton equation describes certain aspects of such orientation waves.
In mathematical physics, the Hunter–Saxton equation (u_t + u u_x)_x = \frac{1}{2} \, u_x^2 is an integrable PDE that arises in the theoretical study of nematic liquid crystals. If the molecules in the liquid crystal are initially all aligned, and some of them are then wiggled slightly, this disturbance in orientation will propagate through the crystal, and the Hunter–Saxton equation describes certain aspects of such orientation waves. = \frac12 \left( \alpha (\nabla \cdot \mathbf{n})^2 + \beta (\mathbf{n} \cdot (\nabla \times \mathbf{n}))^2 + \gamma | \mathbf{n} \times (\nabla \times \mathbf{n})|^2 \right), where the positive coefficients \alpha , \beta , \gamma are known as the elastic coefficients of splay, twist, and bend, respectively.
The kinetic energy is often neglected because of the high viscosity of liquid crystals. \mathcal{L} = \frac{1}{2} \left| \frac{\partial\mathbf{n}}{\partial t} \right|^2 - W(\mathbf{n},\nabla\mathbf{n}) - \frac{\lambda}{2} (1-|\mathbf{n}|^2), where \lambda is a Lagrange multiplier corresponding to the constraint |n|=1. They restricted their attention to "splay waves" where the director field takes the special form \mathbf{n}(x,y,z,t) = (\cos\varphi(x,t), \sin\varphi(x,t), 0).
This assumption reduces the Lagrangian to \mathcal{L} = \frac{1}{2} \left( \varphi_t^2 - a^2(\varphi) \varphi_x^2 \right), \qquad a(\varphi) := \sqrt{\alpha \sin^2 \varphi + \gamma \cos^2 \varphi}, and then the Euler–Lagrange equation for the angle φ becomes \varphi_{tt} = a(\varphi) [a(\varphi) \varphi_x]_x. There are trivial constant solutions φ=φ 0 corresponding to states where the molecules in the liquid crystal are perfectly aligned. Linearization around such an equilibrium leads to the linear wave equation which allows wave propagation in both directions with speed a_0 := a(\varphi_0) , so the nonlinear equation can be expected to behave similarly.
In order to study right-moving waves for large t, one looks for asymptotic solutions of the form \varphi(x,t;\epsilon) = \varphi_0 + \epsilon \varphi_1(\theta,\tau) + O(\epsilon^2), where \theta := x-a_0 t, \qquad \tau := \epsilon t. Inserting this into the equation, one finds at the order \epsilon^2 that (\varphi_{1\tau} + a'(\varphi_0) \varphi_1 \varphi_{1\theta})_{\theta} = \frac{1}{2} a'(\varphi_0) \varphi_{1\theta}^2. A simple renaming and rescaling of the variables (assuming that a'(\varphi_0) \neq 0 ) transforms this into the Hunter–Saxton equation. \mathbf{n}(x,y,z,t) = (\cos\varphi(x,t), \sin\varphi(x,t) \cos\psi(x,t), \sin\varphi(x,t) \sin\psi(x,t)). Then the Lagrangian is \mathcal{L} = \frac{1}{2} \left( \varphi_t^2 - a^2(\varphi) \varphi_x^2 + \sin^2 \varphi \left[ \psi_t^2 - b^2(\varphi) \psi_x^2 \right] \right), where a(\varphi) := \sqrt{\alpha \sin^2 \varphi + \gamma \cos^2 \varphi}, \quad b(\varphi) := \sqrt{\beta \sin^2 \varphi + \gamma \cos^2 \varphi}.
The corresponding Euler–Lagrange equations are coupled nonlinear wave equations for the angles φ and ψ, with φ corresponding to "splay waves" and ψ to "twist waves". The previous Hunter–Saxton case (pure splay waves) is recovered by taking ψ constant, but one can also consider coupled splay-twist waves where both φ and ψ vary.
Asymptotic expansions similar to that above lead to a system of equations, which, after renaming and rescaling the variables, takes the form (v_t + u v_x)_x = 0, \qquad u_{xx} = v_x^2, where u is related to φ and v to ψ. This system implies that u satisfies \left[ (u_t + u u_x)_x - \frac{1}{2} \, u_x^2 \right]_x = 0, so (rather remarkably) the Hunter–Saxton equation arises in this context too, but in a different way.
(u_t + u u_x)_{xx} = u_x u_{xx}, was shown by Hunter and Zheng, who exploited that this equation is obtained from the Camassa–Holm equation u_t - u_{xxt} + 3 u u_x = 2 u_x u_{xx} + u u_{xxx} in the "high frequency limit" (x,t) \mapsto (\epsilon x, \epsilon t), \qquad \epsilon \to 0. Applying this limiting procedure to a Lagrangian for the Camassa–Holm equation, they obtained a Lagrangian \mathcal{L}_2 = \frac{1}{2} u_x^2 + w (v_t + u v_x) which produces the Hunter–Saxton equation after elimination of v and w from the Euler–Lagrange equations for u, v, w. Since there is also the more obvious Lagrangian \mathcal{L}_1 = u_x u_t + u u_x^2, the Hunter–Saxton has two inequivalent variational structures.
Hunter and Zheng also obtained a bihamiltonian formulation and a Lax pair from the corresponding structures for the Camassa–Holm equation in a similar way. The fact that the Hunter–Saxton equation arises physically in two different ways (as shown above) was used by Alì and Hunter to explain why it has this bivariational (or bihamiltonian) structure.
G=\{\varphi\in\mathrm{Diff}(S^1) \mid \varphi(x_0)=x_0\}. The group G is an infinite-dimensional Lie group, whose Lie algebra consists of vector fields on S^1 which vanish at x_0 : \mathfrak{g}=\left\{ u\frac{\partial}{\partial x} \ \bigg\vert \ u(x_0)=0\right\}. Here x is the standard coordinate on S^1 .
Endow \mathfrak{g} with the homogeneous \dot H^1 inner product: \left\langle u\frac{\partial}{\partial x},v\frac{\partial}{\partial x}\right\rangle_{\dot H^1}:=\int_{S^1}u_xv_xdx, where the subscript denotes differentiation. This inner product defines a right-invariant Riemannian metric on G (on the full group \mathrm{Diff}(S^1) this is only a semi-metric, since constant vector fields have norm 0 with respect to \dot H^1 .
Note that G is isomorphic to the right quotient of \mathrm{Diff}(S^1) by the subgroup of translations, which is generated by constant vector fields). Let U(x,t)=u(x,t)\frac{\partial}{\partial x} be a time-dependent vector field on S^1 such that U(\cdot,t)\in\mathfrak{g} for all t , and let \{\varphi_t\} be the flow of U , i.e. the solution to: \frac{d}{dt}\varphi_t(x)=u(\varphi_t(x),t). Then u is a periodic solution to the Hunter-Saxton equation if and only if the path t\mapsto\varphi_t\in G is a geodesic on G with respect to the right-invariant \dot H^1 metric.
In the non-periodic case, one can similarly construct a subgroup of the group of diffeomorphisms of the real line, with a Riemannian metric whose geodesics correspond to non-periodic solutions of the Hunter-Saxton equation with appropriate decay conditions at infinity.
See also
Euler–Arnold equation
Text derived from https://en.wikipedia.org/w/index.php?oldid=1340289165 under CC BY-SA 4.0; modifications have been made.