Hydrofoil
A hydrofoil is a lifting surface, or foil, that operates in water.
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A hydrofoil is a lifting surface, or foil, that operates in water. It is similar in appearance and purpose to aerofoils used by airplanes. Boats that use hydrofoil technology are also simply termed hydrofoils. As a craft gains speed, the hydrofoils lift the boat's hull out of the water, decreasing drag and allowing greater speeds.
Description
The hydrofoil usually consists of a winglike structure mounted on struts below the hull, or across the keels of a catamaran in a variety of boats (see illustration). As a hydrofoil-equipped watercraft increases in speed, the hydrofoil elements below the hull(s) develop enough lift to raise the hull out of the water, which greatly reduces hull drag.
This provides a corresponding increase in speed and fuel efficiency. Wider adoption of hydrofoils is prevented by the increased complexity of building and maintaining them.
Hydrofoils are generally prohibitively more expensive than conventional watercraft above a certain displacement, so most hydrofoil craft are relatively small, and are mainly used as high-speed passenger ferries, where the relatively high passenger fees can offset the high cost of the craft itself. However, the design is simple enough that there are many human-powered hydrofoil designs.
Amateur experimentation and development of the concept is popular.
Hydrodynamic mechanics
Since air and water are governed by similar fluid equations—albeit with different levels of viscosity, density, and compressibility—the hydrofoil and airfoil (both types of foil) create lift in identical ways. The foil shape moves smoothly through the water, deflecting the flow downward, which, following the Euler equations, exerts an upward force on the foil.
This turning of the water creates higher pressure on the bottom of the foil and reduced pressure on the top. This pressure difference is accompanied by a velocity difference, via Bernoulli's principle, so the resulting flow field about the foil has a higher average velocity on one side than the other.
When used as a lifting element on a hydrofoil boat, this upward force lifts the body of the vessel, decreasing drag and increasing speed. The lifting force eventually balances with the weight of the craft, reaching a point where the hydrofoil no longer lifts out of the water but remains in equilibrium.
Since wave resistance and other impeding forces such as various types of drag (physics) on the hull are eliminated as the hull lifts clear, turbulence and drag act increasingly on the much smaller surface area of the hydrofoil, and decreasingly on the hull, creating a marked increase in speed.
Foil configurations
Early hydrofoils used V-shaped foils. Hydrofoils of this type are known as "surface-piercing" since portions of the V-shape hydrofoils rise above the water surface when foilborne. Some modern hydrofoils use fully submerged inverted T-shape foils.
Fully submerged hydrofoils are less subject to the effects of wave action, and, therefore, more stable at sea and more comfortable for crew and passengers. This type of configuration, however, is not self-stabilizing. The angle of attack on the hydrofoils must be adjusted continuously to changing conditions, a control process performed by sensors, a computer, and active surfaces.
Peterhof hydrofoil (18272163540).jpg|Voskhod Meteor boat on Neva Bay.jpg|Meteor Raketa-185 on Khimki Reservoir 6-jun-2014 02.jpg|Raketa Polesye-1 (ship, 1986, Gomel, 7).jpg|Polesye Kizhi 06-2017 img30 Kometa-17 hydrofoil.jpg|Kometa In 1961, SRI International issued a study on "The Economic Feasibility of Passenger Hydrofoil Craft in US Domestic and Foreign Commerce". Commercial use of hydrofoils in the US first appeared in 1961 when two commuter vessels were commissioned by Harry Gale Nye, Jr.'s North American Hydrofoils to service the route from Atlantic Highlands, New Jersey to the financial district of Lower Manhattan.
Germany
A 17-ton German craft VS-6 Hydrofoil was designed and constructed in 1940, completed in 1941 for use as a mine layer; it was tested in the Baltic Sea, producing speeds of 47 knots. Tested against a standard E-boat over the next three years it performed well but was not brought into production. Being faster it could carry a higher payload and was capable of travelling over minefields but was prone to damage and noisier.
Canada
In Canada during World War II, Baldwin worked on an experimental smoke laying hydrofoil (later called the Comox Torpedo) that was later superseded by other smoke-laying technology and an experimental target-towing hydrofoil. The forward two foil assemblies of what is believed to be the latter hydrofoil were salvaged in the mid-1960s from a derelict hulk in Baddeck, Nova Scotia by Colin MacGregor Stevens.
These were donated to the Maritime Museum in Halifax, Nova Scotia. The Canadian Armed Forces built and tested a number of hydrofoils (e.g., Baddeck and two vessels named Bras d'Or), which culminated in the high-speed anti-submarine hydrofoil HMCS Bras d'Or in the late 1960s. However, the program was cancelled in the early 1970s due to a shift away from anti-submarine warfare by the Canadian military.
The Bras d'Or was a surface-piercing type that performed well during her trials, reaching a maximum speed of .
Soviet Union
patrol fast attack craft hydrofoil of the Cuban Navy. The USSR introduced several hydrofoil-based fast attack craft into their navy, principally: Sarancha class missile boat, a unique vessel built in the 1970s Turya class torpedo boat, introduced in 1972 and still in service Matka class missile boat, introduced in the 1980s and still in service Muravey class patrol boat, introduced in the 1980s and still in service Project 664
United States
, a military hydrofoil. The T-shaped foils are visible just below the water. The US Navy began experiments with hydrofoils in the mid-1950s by funding a sailing vessel that used hydrofoils to reach speeds in the 30 mph range.
The XCH-4 (officially, Experimental Craft, Hydrofoil No. 4), designed by William P. Carl, exceeded speeds of and was mistaken for a seaplane due to its shape. Halobates was a 1957 US Navy prototype hydrofoil boat built by Miami Shipbuilding. The US Navy implemented a small number of combat hydrofoils, such as the Pegasus class, from 1977 through 1993.
These hydrofoils were fast and well armed.
Italy
The Italian Navy used six hydrofoils of the Sparviero class starting in the late 1970s. These were armed with a 76 mm gun and two missiles, and were capable of speeds up to . Three similar boats were built for the Japan Maritime Self-Defense Force.
Sailing and sports
's AC72 at the 2013 America's Cup, San Francisco Bay. Several editions of the America's Cup have been raced with foiling yachts. The 2013 and 2017 editions used the AC72 and AC50 classes of catamaran respectively, and the 2021 edition used the AC75 class of foiling monohulls with canting arms.
The French experimental sail-powered hydrofoil Hydroptère is the result of a research project that involves advanced engineering skills and technologies. In September 2009, the Hydroptère set new sailcraft world speed records in the 500 m category, with a speed of and in the category with a speed of .
The 500 m speed record for sailboats is currently held by the Vestas Sailrocket, an exotic design which operates in effect as a hydrofoil. Another trimaran sailboat is the Windrider Rave. The Rave is a commercially available , two person, hydrofoil trimaran, capable of reaching speeds of .
The boat was designed by Jim Brown. The Moth dinghy has evolved into some radical foil configurations. Hobie Sailboats produced a production foiling trimaran, the Hobie Trifoiler, the fastest production sailboat.
Trifoilers have clocked speeds upward of thirty knots. A new kayak design, called Flyak, has hydrofoils that lift the kayak enough to significantly reduce drag, allowing speeds of up to . Some surfers have developed surfboards with hydrofoils called foilboards, specifically aimed at surfing big waves further out to sea.
Quadrofoil Q2 is a two-seater, four-foiled hydrofoil electrical leisure watercraft. Its initial design was set in 2012 and it has been available commercially since the end of 2016. Powered by a 5.2-kWh lithium-ion battery pack and propelled by a 5.5 kW motor, it reaches the top speed of 40 km/h and has 80 km of range.
The Manta5 Hydrofoiler XE-1 is a Hydrofoil E-bike, designed and built in New Zealand that has since been available commercially for pre-order since late 2017. Propelled by a 400 watt motor, it can reach speeds exceeding 14 km/h with a weight of 22 kg. A single charge of the battery lasts an hour for a rider weighing 85 kg.
Candela, a Swedish company, is producing a recreational electric hydrofoil powerboat, making strong claims for efficiency, performance, and range. Hydrofoils are now widely used with kitesurfing, that is traction kites over water.
Hydrofoils are a new trend in windsurfing - including the new Summer Olympic class, the IQFoil, and more recently with Wing foiling, which are essentially a kite with no strings, or a hand-held sail. on the North Sea Canal, the Netherlands 's Urzela JetFoil on West Lamma Channel, Hong Kong 's Barca Foilcat
External links
The International Hydrofoil Society Fast CC Hydrofoil design by Prof. KG Hoppe, inventor of HYSUCAT technology patented by University of Stellenbosch, S.A. HYFOIL Marine has cooperative technology agreements with Prof. KG Hoppe Hydrofoil Assisted Water Craft employing HYSUCAT and HYSUWAC patents in their projects and vessels currently in operation Swiss experimental hydrofoils HyRaii - Hydrofoil Sailboat, Student Project ETH Zurich
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378033324 under CC BY-SA 4.0; modifications have been made.