Hydrogenation

on the catalyst surface and H 2 dissociates.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

on the catalyst surface and H 2 dissociates. (2) An H atom bonds to one C atom. The other C atom is still attached to the surface.

(3) A second C atom bonds to an H atom. The molecule leaves the surface. Hydrogenation is a chemical reaction between molecular hydrogen (H 2 ) and another compound or element, usually in the presence of a catalyst such as nickel, palladium or platinum.

The process is commonly employed to reduce or saturate organic compounds. Hydrogenation typically constitutes the addition of pairs of hydrogen atoms to a molecule, often an alkene. Catalysts are required for the reaction to be usable; non-catalytic hydrogenation takes place only at very high temperatures.

Hydrogenation reduces double and triple bonds in hydrocarbons. File:Dichlorotris(triphenylphosphine)ruthenium(II).png|Dichlorotris(triphenylphosphine)ruthenium(II) is a precatalyst based on ruthenium.

File:Crabtree.svg|Crabtree's catalyst is active for hydrogenation of sterically hindered alkenes File:Cyclooctadiene-rhodium-chloride-dimer-2D-skeletal.png|Cyclooctadiene rhodium chloride dimer, is a precursor to many homogeneous catalysts. File:(S)-iPr-PHOX.svg|(S)-iPr-PHOX is a typical chelating phosphine ligand used in asymmetric hydrogenation. using Wilkinson's catalyst.

Homogeneous catalysts are also used in asymmetric synthesis by the hydrogenation of prochiral substrates. An early demonstration of this approach was the Rh-catalyzed hydrogenation of enamides as precursors to the drug . To achieve asymmetric reduction, these catalyst are made chiral by use of chiral diphosphine ligands.

Rhodium catalyzed hydrogenation has also been used in the herbicide production of S-metolachlor, which uses a Josiphos type ligand (called Xyliphos). In principle asymmetric hydrogenation can be catalyzed by chiral heterogeneous catalysts, but this approach remains more of a curiosity than a useful technology.

With rare exceptions, molecular hydrogen is unreactive toward organic compounds in the absence of metal catalysts. In a hydrogenation reaction involving a metal catalyst, unsaturated substrate is chemisorbed onto the catalyst, with most sites covered by the substrate.

In heterogeneous catalysis, hydrogen forms surface hydrides (M-H) from which hydrogens can be transferred to the chemisorbed substrate. Platinum, palladium, rhodium, and ruthenium form highly active catalysts, which operate at lower temperatures and lower pressures of dihydrogen.

Non-precious metal catalysts, especially those based on nickel (such as Raney nickel and Urushibara nickel) have also been developed as economical alternatives, but they are often slower or require higher temperatures. In hydrogenations, a trade-off can be the speed of the reaction vs. cost of the catalyst and apparatus required for use of high pressures.

As in homogeneous catalysts, the activity is adjusted through changes in the environment around the metal, i.e. the coordination sphere. Different faces of a crystalline heterogeneous catalyst display distinct activities, for example. This can be modified by mixing metals or using different preparation techniques.

Similarly, heterogeneous catalysts are affected by their supports. In many cases, highly empirical modifications involve selective "poisons".

Thus, a carefully chosen catalyst can be used to hydrogenate some functional groups without affecting others, such as the hydrogenation of alkenes without touching aromatic rings, or the selective hydrogenation of alkynes to alkenes using Lindlar's catalyst. For example, when the catalyst palladium is placed on barium sulfate and then treated with quinoline, the resulting catalyst reduces alkynes only as far as alkenes.

The Lindlar catalyst has been applied to the conversion of phenylacetylene to styrene. File:CarvoneH2.png|Selective hydrogenation of the less hindered alkene group in carvone using a homogeneous catalyst (Wilkinson's catalyst). File:PhC2HH2.png|Partial hydrogenation of phenylacetylene using the Lindlar catalyst.

File:ImineH2.png|Hydrogenation of an imine using a Raney nickel catalyst, a popular heterogeneous catalyst. File:ResorcinolH2.png|Partial hydrogenation of a resorcinol derivative using a Raney-Nickel catalyst. File:SuccPdH2.png|Hydrogenation of maleic acid to succinic acid.

Thermodynamics

The addition of hydrogen to double or triple bonds in hydrocarbons is quite favorable thermodynamically. For example, the addition of hydrogen to ethylene has a Gibbs free energy change of , which is highly exergonic.

In the hydrogenation of vegetable oils and fatty acids, for example, the heat released, about 25 kcal per mole (105 kJ/mol), is sufficient to raise the temperature of the oil by per iodine number drop. However, the reaction rate for most hydrogenation reactions is negligible in the absence of catalysts.

The mechanism of metal-catalyzed hydrogenation of alkenes and alkynes has been extensively studied. First of all isotope labeling using deuterium confirms the regiochemistry of the addition:

Mechanism

The mechanism for the metal-catalyzed addition of H2 to alkenes and alkynes is similar for both heterogeneous and homogeneous catalysts. On solids, the mechanism is sometimes called the Horiuti-Polanyi mechanism: Binding of the unsaturated substrate at the metal Dissociation of on the catalyst the sequence of these steps is unclear or variable Addition of one atom of hydrogen; this step is reversible Addition of the second atom; effectively irreversible.

The mechanistic details are known in exquisite detail for homogeneous catalysis because the later can be interrogated spectroscopically. Some specific reactions are: binding of the hydrogen to give a dihydride complex via oxidative addition.

Preceding the oxidative addition of is the formation of a dihydrogen complex binding of alkene: The sequence of the preceding reactions is often reversed. The main point is the formation of an alkene-metal-dihydride transfer of one hydrogen atom from the metal to carbon (migratory insertion): transfer of the second hydrogen atom from the metal to the alkyl group with simultaneous dissociation of the alkane ("reductive elimination")

Selected mechanistic details

Many details are confirmed using D 2 (deuterium) in place of H 2 . Ordinarily the product contains a pair of adjacent deuterium atoms: An important characteristic of alkene and alkyne hydrogenations, both the homogeneously and heterogeneously-catalyzed versions, is that hydrogen addition occurs with "syn addition". Semihydrogenation of internal alkynes gives Z-alkenes.

H 2 tends to add to the least hindered side. Aromatic substrates are less reactive than typical alkenes. The first hydrogenation of an arene is slowest.

The product of this step is a cyclohexadiene, which hydrogenate rapidly and are rarely detected. Similarly, the cyclohexene is ordinarily reduced to cyclohexane.

Side reactions

Alkene isomerization often accompanies hydrogenation. This side reaction proceeds by beta-hydride elimination of the alkyl intermediate: Often the released olefin is trans. Since trans olefins are less susceptible to hydrogenation than cis-olefins, they tend to accumulate.

Similarly, under hydrogenation conditions, terminal alkenes convert to internal alkenes, which also resist hydrogenation for steric reasons. Such side reactions can be detected using deuterium labeling.

Metal-free hydrogenation

For most practical purposes, hydrogenation requires a metal catalyst. Hydrogenation can, however, proceed from some hydrogen donors without catalysts. Illustrative hydrogen donors include diimide and aluminium isopropoxide, the latter illustrated by the Meerwein–Ponndorf–Verley reduction.

Some metal-free catalytic systems have been investigated. One such system for reduction of ketones consists of tert-butanol and potassium tert-butoxide and very high temperatures. The reaction depicted below describes the hydrogenation of benzophenone: A chemical kinetics study found this reaction is first-order in all three reactants suggesting a cyclic 6-membered transition state.

Another system for metal-free hydrogenation is based on the phosphine-borane, compound 1, which has been called a frustrated Lewis pair. It reversibly accepts dihydrogen at relatively low temperatures to form the phosphonium borate 2 which can reduce simple hindered imines.

"The Magic of Hydro", Popular Mechanics, June 1931, pp. 107–109 – early article for the general public on hydrogenation of oil produced in the 1930s

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370723445 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.