Hydronics

Hydronics ( ) is the use of liquid water or gaseous water (steam) or a water solution (usually glycol with water) as a heat-transfer medium in heating and cooling systems.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Hydronics ( ) is the use of liquid water or gaseous water (steam) or a water solution (usually glycol with water) as a heat-transfer medium in heating and cooling systems. The name differentiates such systems from oil and refrigerant systems.

Historically, in large-scale commercial buildings such as high-rise and campus facilities, a hydronic system may include both a chilled and a heated water loop, to provide for both heating and air conditioning. Chillers and cooling towers are used either separately or together as means to provide water cooling, while boilers heat water.

A recent innovation is the chiller boiler system, which provides an efficient form of HVAC for homes and smaller commercial spaces.

District heating

Many larger cities have a district heating system that provides, through underground piping, publicly available high temperature hot water and chilled water. A building in the service district may be connected to these on payment of a service fee.

Basic types

Hydronic systems can include the following kinds of distributions: Chilled water systems Hot water systems Steam systems Steam condensate systems Ground source heat pump systems

Classification

Hydronic systems are further classified in five ways: Flow generation (forced flow or gravity flow) Temperature (low, medium, and high) Pressurization (low, medium, and high) Piping arrangement Pumping arrangement , 2015)]]

Piping arrangements

Hydronic systems may be divided into several general piping arrangement categories: Single or one-pipe Two pipe steam (direct return or reverse return) Three pipe Four pipe Series loop

Advantages

Lower cost of return piping in most (but not all) applications, and the supply and return piping are separated.

Disadvantages

This system can be difficult to balance due to the supply line being a different length than the return; the further the heat transfer device is from the boiler, the more pronounced the pressure difference. Because of this, it is always recommended to: minimize the distribution piping pressure drops; use a pump with a , include balancing and flow-measuring devices at each terminal or branch circuit; and use control valves with a at the terminals.

Advantages

The advantage with the two-pipe reverse return system is that the pipe run to each radiator is about the same, this ensures that the frictional resistance to the flow of water in each radiator is the same. This allows easy balancing of the system.

Disadvantages

The installer or repair person cannot trust that every system is self-balancing without properly testing it.

Improved efficiency and operating costs

There have been considerable improvements in the efficiency and therefore the operating costs of a hydronic heating system with the introduction of insulating products. Radiator Panel system pipes are covered with a fire rated, flexible and lightweight elastomeric rubber material designed for thermal insulation.

Slab Heating efficiency is improved with the installation of a thermal barrier made of foam. There are now many product offerings on the market with different energy ratings and installation methods.

Balancing

Most hydronic systems require balancing. This involves measuring and setting the flow to achieve an optimal distribution of energy in the system. In a balanced system every radiator gets just enough hot water to allow it to heat up fully.

Water-loop system

Water-loop systems can also experience air problems. Air found within hydronic water-loop systems may be classified into three forms:

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377086046 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.