Hydropneumatic device
Hydropneumatic devices (or hydro-pneumatic devices) are systems that operate using water and gas to store energy, or amplify mechanical force.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Hydropneumatic devices (or hydro-pneumatic devices) are systems that operate using water and gas to store energy, or amplify mechanical force. The devices are used in various applications which include pressure booster systems for high-rise buildings, shock absorbing accumulators in industrial machinery, and heavy-duty presses.
Hydropneumatic pump controllers
Hydropneumatic pump controllers provide a Means of control for multiple fixed delivery volume, low cost low complexity pumps; to provide variable flow as required by small (say +/- 10 psi) pressure increase or decrease of a system. Means of control for pump unloading / recirculation against no pressure, without electric pressure switches.
The controllers are pressure cylinders containing a movable separator member between a gas and a liquid, said moveable member causing the actuation of directional control valve or valves. The controllers are used in a circuit after a pump that is followed by a valved-side branch, and beyond a check valve, so that this device can only discharge liquid volume by a pressure fall of the system.
Variations on the design include Having a protruding drive rod, cams from which trip valve handles. Having magnetically actuated reed switched. Having infrared signaling of separator position.
Hydropneumatic pulsation filters
Hydropneumatic pulsation filters provide means of reducing the amplitude of pressure changes the velocity of which is in the order of 1.4 km/s. All are used in industry. A hydropneumatic pulsation filter is a pressure container with separate inlet and outlet, connectable to a pipe system so that all pressure changes must attempt to pass through said chamber.
Entry and exit of said chamber being of a diameter relative to chamber diameter that provides a high discharge coefficient, and without close proximity of any reflective surface. Lack of any sudden change in cross section area of flow path that would reflect a pressure wave, i.e. no orifice plate(s). Variations include Combination "dual purpose" devices addressing "acceleration head reduction" by means of a gas containment.
The devices have applications by frequency response For pulsation above frequency 100 Hz (i.e., for high speed pumps and all pipe systems shorter than say 80 yards): no moving parts devices. For pulsation frequencies below 100 Hz: certain moving parts devices of known membrane response characteristics.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378514841 under CC BY-SA 4.0; modifications have been made.