Hydrostatic weighing
Hydrostatic weighing, also referred to as underwater weighing or hydrodensitometry,is a technique for measuring the relative density of an object.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Hydrostatic weighing, also referred to as underwater weighing or hydrodensitometry,is a technique for measuring the relative density of an object. It is a direct application of Archimedes' principle, that the upward buoyant force that is exerted on a body immersed in a fluid, is equal to the weight of the fluid that the body displaces.
Method
Hydrostatic weighing makes use of the apparent reduced weight of an object when weighed in a less dense liquid due to the buoyant force exerted upon it. Relative density (with respect to the liquid) can be calculated using the following formula: where W air is the weight of the sample in air (measured in newtons, pounds-force or some other unit of force) W liquid is the weight of the sample submerged in liquid (measured in the same units).
RD = \frac{W_\mathrm{air}}{W_\mathrm{air} - W_\mathrm{liquid}}, This technique cannot easily be used to measure relative densities less than one, because the sample will then float. W l iquid becomes a negative quantity, representing the force needed to keep the sample underwater.
Applications
RV-Est(liters, Men) = 1.310 × Ht. (meters) + 0.022 × Age (yrs., take as 25 for 18-25) − 1.232 RV-Est(liters, Women) = 1.812 × Ht.
(meters) + 0.016 × Age (yrs., take as 25 for 18-25) − 2.003 These estimates are for adults aged 18-70, have standard deviation of about 0.4 litres and have dependence on ethnicity, environmental factors, etc. Residual volume may also be estimated as a proportion of vital capacity (0.24 for men and 0.28 for women). Body density can be calculated by the following equation: D_b = \frac{M_a}{\frac{M_a - M_w}{D_w} - RV} Where: = Density of the body; = "Mass in air" (i.e. dry weight); = "Mass in water" (i.e. underwater weight); = Density of water (based on water temperature); = Residual volume (the unfilled space enclosed by the body- e.g. volume of air in the lungs + respiratory passages after a maximum exhalation).
Once body density has been calculated from the data obtained by hydrostatic/underwater weighing, body composition can be estimated. The most commonly used equations for estimating the percent of body fat from density are those of Siri and Brozek et al.: Siri (1956): Fat % = [4.950 /Density - 4.500]×100 Brozek et al. (1963): Fat % = [4.570 /Density - 4.142]×100
See also
Body composition Composition of the human body Body fat percentage
Text derived from https://en.wikipedia.org/w/index.php?oldid=1342136449 under CC BY-SA 4.0; modifications have been made.