Hyperbolic geometry

), along with two diverging ultra-parallel lines In mathematics, hyperbolic geometry (also called Lobachevskian geometry or Bolyai–Lobachevskian geometry) is a non-Euclidean geometry.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 16 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

), along with two diverging ultra-parallel lines In mathematics, hyperbolic geometry (also called Lobachevskian geometry or Bolyai–Lobachevskian geometry) is a non-Euclidean geometry. The parallel postulate of Euclidean geometry is replaced with: :For any given line R and point P not on R, in the plane containing both line R and point P there are at least two distinct lines through P that do not intersect R. (Compare the above with Playfair's axiom, the modern version of Euclid's parallel postulate.)

The hyperbolic plane is a plane where every point is a saddle point. Hyperbolic plane geometry is also the geometry of pseudospherical surfaces, surfaces with a constant negative Gaussian curvature. Saddle surfaces have negative Gaussian curvature in at least some regions, where they locally resemble the hyperbolic plane.

The hyperboloid model of hyperbolic geometry provides a representation of events one temporal unit into the future in Minkowski space, the basis of special relativity. Each of these events corresponds to a rapidity in some direction.…

), along with two diverging ultra-parallel lines In mathematics, hyperbolic geometry (also called Lobachevskian geometry or Bolyai–Lobachevskian geometry) is a non-Euclidean geometry. The parallel postulate of Euclidean geometry is replaced with: For any given line R and point P not on R, in the plane containing both line R and point P there are at least two distinct lines through P that do not intersect R. (Compare the above with Playfair's axiom, the modern version of Euclid's parallel postulate.)

The hyperbolic plane is a plane where every point is a saddle point. Hyperbolic plane geometry is also the geometry of pseudospherical surfaces, surfaces with a constant negative Gaussian curvature. Saddle surfaces have negative Gaussian curvature in at least some regions, where they locally resemble the hyperbolic plane.

The hyperboloid model of hyperbolic geometry provides a representation of events one temporal unit into the future in Minkowski space, the basis of special relativity. Each of these events corresponds to a rapidity in some direction.

When geometers first realised they were working with something other than the standard Euclidean geometry, they described their geometry under many different names; Felix Klein finally gave the subject the name hyperbolic geometry to include it in the now rarely used sequence elliptic geometry (spherical geometry), parabolic geometry (Euclidean geometry), and hyperbolic geometry. In the former Soviet Union, it is commonly called Lobachevskian geometry, named after one of its discoverers, the Russian geometer Nikolai Lobachevsky.

Relation to Euclidean geometry

Hyperbolic geometry is more closely related to Euclidean geometry than it seems: the only axiomatic difference is the parallel postulate. When the parallel postulate is removed from Euclidean geometry the resulting geometry is absolute geometry. There are two kinds of absolute geometry, Euclidean and hyperbolic.

All theorems of absolute geometry, including the first 28 propositions of book one of Euclid's Elements, are valid in Euclidean and hyperbolic geometry. Propositions 27 and 28 of Book One of Euclid's Elements prove the existence of parallel/non-intersecting lines.

This difference also has many consequences: concepts that are equivalent in Euclidean geometry are not equivalent in hyperbolic geometry; new concepts need to be introduced. Further, because of the angle of parallelism, hyperbolic geometry has an absolute scale, a relation between distance and angle measurements.

Lines

Single lines in hyperbolic geometry have exactly the same properties as single straight lines in Euclidean geometry. For example, two points uniquely define a line, and line segments can be infinitely extended. Two intersecting lines have the same properties as two intersecting lines in Euclidean geometry.

For example, two distinct lines can intersect in no more than one point, intersecting lines form equal opposite angles, and adjacent angles of intersecting lines are supplementary. When a third line is introduced, then there can be properties of intersecting lines that differ from intersecting lines in Euclidean geometry.

For example, given two intersecting lines there are infinitely many lines that do not intersect either of the given lines. These properties are all independent of the model used, even if the lines may look radically different.

Non-intersecting / parallel lines

Non-intersecting lines in hyperbolic geometry also have properties that differ from non-intersecting lines in Euclidean geometry: For any line R and any point P which does not lie on R, in the plane containing line R and point P there are at least two distinct lines through P that do not intersect R. This implies that there are through P an infinite number of coplanar lines that do not intersect R. These non-intersecting lines are divided into two classes: Two of the lines (x and y in the diagram) are limiting parallels (sometimes called critically parallel, horoparallel or just parallel): there is one in the direction of each of the ideal points at the "ends" of R, asymptotically approaching R, always getting closer to R, but never meeting it. All other non-intersecting lines have a point of minimum distance and diverge from both sides of that point, and are called ultraparallel, diverging parallel or sometimes non-intersecting.

Some geometers simply use the phrase "parallel lines" to mean "limiting parallel lines", with ultraparallel lines meaning just non-intersecting. These limiting parallels make an angle θ with PB; this angle depends only on the Gaussian curvature of the plane and the distance PB and is called the angle of parallelism.

For ultraparallel lines, the ultraparallel theorem states that there is a unique line in the hyperbolic plane that is perpendicular to each pair of ultraparallel lines. Let R = \frac{1}{\sqrt{-K}} , where K is the Gaussian curvature of the plane. In hyperbolic geometry, K is negative, so the square root is of a positive number.

Then the circumference of a circle of radius r is equal to: 2\pi R \sinh \frac{r}{R} \,. And the area of the enclosed disk is: 4\pi R^2 \sinh^2 \frac{r}{2R} = 2\pi R^2 \left(\cosh \frac{r}{R} - 1\right) \,.

Therefore, in hyperbolic geometry the ratio of a circle's circumference to its radius is always strictly greater than 2\pi , though it can be made arbitrarily close by selecting a small enough circle. If the Gaussian curvature of the plane is −1 then the geodesic curvature of a circle of radius r is: \frac{1}{\tanh(r)}

Regular apeirogon and pseudogon

and circumscribed horocycle in the Poincaré disk model Special polygons in hyperbolic geometry are the regular apeirogon and pseudogon uniform polygons with an infinite number of sides. In Euclidean geometry, the only way to construct such a polygon is to make the side lengths tend to zero and the apeirogon is indistinguishable from a circle, or make the interior angles tend to 180° and the apeirogon approaches a straight line.

However, in hyperbolic geometry, a regular apeirogon or pseudogon has sides of any length (i.e., it remains a polygon with noticeable sides). The side and angle bisectors will, depending on the side length and the angle between the sides, be limiting or diverging parallel.

If the bisectors are limiting parallel then it is an apeirogon and can be inscribed and circumscribed by concentric horocycles. If the bisectors are diverging parallel then it is a pseudogon and can be inscribed and circumscribed by hypercycles (since all its vertices are the same distance from a line, the axis, and the midpoints of its sides are also equidistant from that same axis).

Cartesian-like coordinate systems

Compared to Euclidean geometry, hyperbolic geometry presents many difficulties for a coordinate system: the angle sum of a quadrilateral is always less than 360°; there are no equidistant lines, so a proper rectangle would need to be enclosed by two lines and two hypercycles; parallel-transporting a line segment around a quadrilateral causes it to rotate when it returns to the origin; etc. There are however different coordinate systems for hyperbolic plane geometry. All are based around choosing a point (the origin) on a chosen directed line (the x-axis) and after that many choices exist.

The Lobachevsky coordinates x and y are found by dropping a perpendicular onto the x-axis. x will be the label of the foot of the perpendicular. y will be the distance along the perpendicular of the given point from its foot (positive on one side and negative on the other). Another coordinate system measures the distance from the point to the horocycle through the origin centered around (0, + \infty ) and the length along this horocycle.

Other coordinate systems use the Klein model or the Poincaré disk model described below, and take the Euclidean coordinates as hyperbolic. The distance between two points represented by (x_i, y_i), i=1,2 in this coordinate system is \operatorname{dist} (\langle x_1, y_1 \rangle, \langle x_2, y_2 \rangle) = \operatorname{arcosh} \left( \cosh y_1 \cosh (x_2 - x_1) \cosh y_2 - \sinh y_1 \sinh y_2 \right) \,.

This formula can be derived from the formulas about hyperbolic triangles. The corresponding metric tensor field is: (\mathrm{d} s)^2 = \cosh^2 y \, (\mathrm{d} x)^2 + (\mathrm{d} y)^2 .

In this coordinate system, straight lines take one of these forms ((x, y) is a point on the line; x 0 , y 0 , A, and α are parameters): ultraparallel to the x-axis \tanh (y) = \tanh (y_0) \cosh (x - x_0) asymptotically parallel on the negative side \tanh (y) = A \exp (x) asymptotically parallel on the positive side \tanh (y) = A \exp (- x) intersecting perpendicularly x = x_0 intersecting at an angle α \tanh (y) = \tan (\alpha) \sinh (x - x_0) Generally, these equations will only hold in a bounded domain (of x values). At the edge of that domain, the value of y blows up to ±infinity.

19th-century developments

In the 19th century, hyperbolic geometry was explored extensively by Nikolai Lobachevsky, János Bolyai, Carl Friedrich Gauss and Franz Taurinus. Unlike their predecessors, who just wanted to eliminate the parallel postulate from the axioms of Euclidean geometry, these authors realized they had discovered a new geometry.

Gauss wrote in an 1824 letter to Franz Taurinus that he had constructed it, but Gauss did not publish his work. Gauss called it "non-Euclidean geometry" causing several modern authors to continue to consider "non-Euclidean geometry" and "hyperbolic geometry" to be synonyms.

Taurinus published results on hyperbolic trigonometry in 18261, argued that hyperbolic geometry is self-consistent, but still believed in the special role of Euclidean geometry. The complete system of hyperbolic geometry was published by Lobachevsky in 18291/1830, while Bolyai discovered it independently and published in 1832.

In 1868, Eugenio Beltrami provided models of hyperbolic geometry, and used this to prove that hyperbolic geometry was consistent if and only if Euclidean geometry was. The term "hyperbolic geometry" was introduced by Felix Klein in 1871. Klein followed an initiative of Arthur Cayley to use the transformations of projective geometry to produce isometries.

The idea used a conic section or quadric to define a region, and used cross ratio to define a metric. The projective transformations that leave the conic section or quadric stable are the isometries. "Klein showed that if the Cayley absolute is a real curve then the part of the projective plane in its interior is isometric to the hyperbolic plane..."

The Beltrami–Klein model

The Beltrami–Klein model, also known as the projective disk model, Klein disk model and Klein model, is named after Eugenio Beltrami and Felix Klein. For the two dimensions this model uses the interior of the unit circle for the complete hyperbolic plane, and the chords of this circle are the hyperbolic lines.

For higher dimensions this model uses the interior of the unit ball, and the chords of this n-ball are the hyperbolic lines. This model has the advantage that lines are straight, but the disadvantage that angles are distorted (the mapping is not conformal), and also circles are not represented as circles.

The distance in this model is half the logarithm of the cross-ratio, which was introduced by Arthur Cayley in projective geometry. x^2 + y^2 +z^2 = 1 , z > 0. The hyperbolic lines are half-circles orthogonal to the boundary of the hemisphere.

The hemisphere model is part of a Riemann sphere, and different projections give different models of the hyperbolic plane: Stereographic projection from (0,0, -1) onto the plane z = 0 projects corresponding points on the Poincaré disk model Stereographic projection from (0,0, -1) onto the surface x^2 + y^2 - z^2 = -1 , z > 0 projects corresponding points on the hyperboloid model Stereographic projection from (-1,0,0) onto the plane x=1 projects corresponding points on the Poincaré half-plane model Orthographic projection onto a plane z = C projects corresponding points on the Beltrami–Klein model. Central projection from the centre of the sphere onto the plane z = 1 projects corresponding points on the Gans Model

Connection between the models

from −1. Beltrami–Klein model is orthographic projection from hemispherical model. Poincaré half-plane model here projected from the hemispherical model by rays from left end of Poincaré disk model.

All models essentially describe the same structure. The difference between them is that they represent different coordinate charts laid down on the same metric space, namely the hyperbolic plane. The characteristic feature of the hyperbolic plane itself is that it has a constant negative Gaussian curvature, which is indifferent to the coordinate chart used.

The geodesics are similarly invariant: that is, geodesics map to geodesics under coordinate transformation. Hyperbolic geometry is generally introduced in terms of the geodesics and their intersections on the hyperbolic plane.

Once we choose a coordinate chart (one of the "models"), we can always embed it in a Euclidean space of same dimension, but the embedding is clearly not isometric (since the curvature of Euclidean space is 0). The hyperbolic space can be represented by infinitely many different charts; but the embeddings in Euclidean space due to these four specific charts show some interesting characteristics.

Since the four models describe the same metric space, each can be transformed into the other. See, for example: the Beltrami–Klein model's relation to the hyperboloid model, the Beltrami–Klein model's relation to the Poincaré disk model, and the Poincaré disk model's relation to the hyperboloid model.

Higher dimensions

Hyperbolic geometry is not limited to 2 dimensions; a hyperbolic geometry exists for every higher number of dimensions.

Homogeneous structure

Hyperbolic space of dimension n is a special case of a Riemannian symmetric space of noncompact type, as it is isomorphic to the quotient \mathrm{O}(1,n)/(\mathrm{O}(1) \times \mathrm{O}(n)). The orthogonal group acts by norm-preserving transformations on Minkowski space R 1,n , and it acts transitively on the two-sheet hyperboloid of norm 1 vectors. Timelike lines (i.e., those with positive-norm tangents) through the origin pass through antipodal points in the hyperboloid, so the space of such lines yields a model of hyperbolic n-space.

The stabilizer of any particular line is isomorphic to the product of the orthogonal groups O(n) and O(1), where O(n) acts on the tangent space of a point in the hyperboloid, and O(1) reflects the line through the origin. Many of the elementary concepts in hyperbolic geometry can be described in linear algebraic terms: geodesic paths are described by intersections with planes through the origin, dihedral angles between hyperplanes can be described by inner products of normal vectors, and hyperbolic reflection groups can be given explicit matrix realizations.

In small dimensions, there are exceptional isomorphisms of Lie groups that yield additional ways to consider symmetries of hyperbolic spaces. For example, in dimension 2, the isomorphisms allow one to interpret the upper half plane model as the quotient and the Poincaré disc model as the quotient .

In both cases, the symmetry groups act by fractional linear transformations, since both groups are the orientation-preserving stabilizers in of the respective subspaces of the Riemann sphere. The Cayley transformation not only takes one model of the hyperbolic plane to the other, but realizes the isomorphism of symmetry groups as conjugation in a larger group.

In dimension 3, the fractional linear action of on the Riemann sphere is identified with the action on the conformal boundary of hyperbolic 3-space induced by the isomorphism . This allows one to study isometries of hyperbolic 3-space by considering spectral properties of representative complex matrices.

For example, parabolic transformations are conjugate to rigid translations in the upper half-space model, and they are exactly those transformations that can be represented by unipotent upper triangular matrices.

Bibliography

A'Campo, Norbert and Papadopoulos, Athanase, (2012) Notes on hyperbolic geometry, in: Strasbourg Master class on Geometry, pp. 1–182, IRMA Lectures in Mathematics and Theoretical Physics, Vol. 18, Zürich: European Mathematical Society (EMS), 461 pages, SBN , DOI 10.4171–105. Coxeter, H. S. M., (1942) Non-Euclidean geometry, University of Toronto Press, Toronto Lobachevsky, Nikolai I., (2010) Pangeometry, Edited and translated by Athanase Papadopoulos, Heritage of European Mathematics, Vol. 4.

Zürich: European Mathematical Society (EMS). xii, 310~p, /hbk Milnor, John W., (1982) Hyperbolic geometry: The first 150 years, Bull. Amer. Math.

Soc. (N.S.) Volume 6, Number 1, pp. 9–24. Reynolds, William F., (1993) Hyperbolic Geometry on a Hyperboloid, American Mathematical Monthly 100:442–455.

Samuels, David, (March 2006) Knit Theory Discover Magazine, volume 27, Number 3. James W. Anderson, Hyperbolic Geometry, Springer 2005, James W. Cannon, William J. Floyd, Richard Kenyon, and Walter R. Parry (1997) Hyperbolic Geometry, MSRI Publications, volume 31.

Javascript freeware for creating sketches in the Poincaré Disk Model of Hyperbolic Geometry University of New Mexico "The Hyperbolic Geometry Song" A short music video about the basics of Hyperbolic Geometry available at YouTube. More on hyperbolic geometry, including movies and equations for conversion between the different models University of Illinois at Urbana-Champaign Hyperbolic Voronoi diagrams made easy, Frank Nielsen , interactive instructional website.

Hyperbolic Planar Tesselations Models of the Hyperbolic Plane

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377554918 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Hyperbolic geometry” revision 1377554918 · retrieved 2026-10-20 publication date (×2) · confidence 0.95 revision URL