Hyperboloid

In geometry, a hyperboloid of revolution, sometimes called a circular hyperboloid, is the surface generated by rotating a hyperbola around one of its principal axes.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geometry, a hyperboloid of revolution, sometimes called a circular hyperboloid, is the surface generated by rotating a hyperbola around one of its principal axes. A hyperboloid is the surface obtained from a hyperboloid of revolution by deforming it by means of directional scalings, or more generally, of an affine transformation.

A hyperboloid is a quadric surface, that is, a surface defined as the zero set of a polynomial of degree two in three variables. Among quadric surfaces, a hyperboloid is characterized by not being a cone or a cylinder, having a center of symmetry, and intersecting many planes into hyperbolas.

A hyperboloid has three pairwise perpendicular axes of symmetry, and three pairwise perpendicular planes of symmetry. Given a hyperboloid, one can choose a Cartesian coordinate system such that the hyperboloid is defined by one of the following equations: {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = 1, or {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = -1.

The coordinate axes are axes of symmetry of the hyperboloid and the origin is the center of symmetry of the hyperboloid. In any case, the hyperboloid is asymptotic to the cone of the equations: {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = 0 . One has a hyperboloid of revolution if and only if a^2=b^2.…

In geometry, a hyperboloid of revolution, sometimes called a circular hyperboloid, is the surface generated by rotating a hyperbola around one of its principal axes. A hyperboloid is the surface obtained from a hyperboloid of revolution by deforming it by means of directional scalings, or more generally, of an affine transformation.

A hyperboloid is a quadric surface, that is, a surface defined as the zero set of a polynomial of degree two in three variables. Among quadric surfaces, a hyperboloid is characterized by not being a cone or a cylinder, having a center of symmetry, and intersecting many planes into hyperbolas.

A hyperboloid has three pairwise perpendicular axes of symmetry, and three pairwise perpendicular planes of symmetry. Given a hyperboloid, one can choose a Cartesian coordinate system such that the hyperboloid is defined by one of the following equations: {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = 1, or {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = -1.

The coordinate axes are axes of symmetry of the hyperboloid and the origin is the center of symmetry of the hyperboloid. In any case, the hyperboloid is asymptotic to the cone of the equations: {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2} = 0 . One has a hyperboloid of revolution if and only if a^2=b^2.

Otherwise, the axes are uniquely defined (up to the exchange of the x-axis and the y-axis). There are two kinds of hyperboloids. In the first case ( in the right-hand side of the equation): a one-sheet hyperboloid, also called a hyperbolic hyperboloid.

It is a connected surface, which has a negative Gaussian curvature at every point. This implies near every point the intersection of the hyperboloid and its tangent plane at the point consists of two branches of curve that have distinct tangents at the point.

In the case of the one-sheet hyperboloid, these branches of curves are lines and thus the one-sheet hyperboloid is a doubly ruled surface. In the second case ( in the right-hand side of the equation): a two-sheet hyperboloid, also called an elliptic hyperboloid. The surface has two connected components and a positive Gaussian curvature at every point.

The surface is convex in the sense that the tangent plane at every point intersects the surface only in this point. \begin{align} x&=a \cosh v \cos\theta \\ y&=b \cosh v \sin\theta \\ z&=c \sinh v \end{align} Two-surface hyperboloid: \begin{align} x&=a \sinh v \cos\theta \\ y&=b \sinh v \sin\theta \\ z&=\pm c \cosh v \end{align} The following parametric representation includes hyperboloids of one sheet, two sheets, and their common boundary cone, each with the z -axis as the axis of symmetry: \mathbf x(s,t) = \left( \begin{array}{lll} a \sqrt{s^2+d} \cos t\\ b \sqrt{s^2+d} \sin t\\ c s \end{array} \right) For d>0 one obtains a hyperboloid of one sheet, For d a hyperboloid of two sheets, and For d=0 a double cone. One can obtain a parametric representation of a hyperboloid with a different coordinate axis as the axis of symmetry by shuffling the position of the c s term to the appropriate component in the equation above.

(\mathbf{x}-\mathbf{v})^\mathrm{T} A (\mathbf{x}-\mathbf{v}) = 1, where is a matrix and , are vectors. The eigenvectors of define the principal directions of the hyperboloid and the eigenvalues of A are the reciprocals of the squares of the semi-axes: {1/a^2} , {1/b^2} and {1/c^2} . The one-sheet hyperboloid has two positive eigenvalues and one negative eigenvalue.

The two-sheet hyperboloid has one positive eigenvalue and two negative eigenvalues. {x^2 \over a^2} + {y^2 \over b^2} - {z^2 \over c^2}= 1 then the lines g^{\pm}_{\alpha}: \mathbf{x}(t) = \begin{pmatrix} a\cos\alpha \\ b\sin\alpha \\ 0\end{pmatrix} + t\cdot \begin{pmatrix} -a\sin\alpha\\ b\cos\alpha\\ \pm c\end{pmatrix}\ ,\quad t\in \R,\ 0\le \alpha\le 2\pi\ are contained in the surface. In case a = b the hyperboloid is a surface of revolution and can be generated by rotating one of the two lines g^{+}_{0} or g^{-}_{0} , which are skew to the rotation axis (see picture).

This property is called Wren's theorem. The more common generation of a one-sheet hyperboloid of revolution is rotating a hyperbola around its semi-minor axis (see picture; rotating the hyperbola around its other axis gives a two-sheet hyperbola of revolution). A hyperboloid of one sheet is projectively equivalent to a hyperbolic paraboloid.

For simplicity the plane sections of the unit hyperboloid with equation \ H_1: x^2+y^2-z^2=1 are considered. Because a hyperboloid in general position is an affine image of the unit hyperboloid, the result applies to the general case, too.

A plane with a slope less than 1 (1 is the slope of the lines on the hyperboloid) intersects H_1 in an ellipse, A plane with a slope equal to 1 containing the origin intersects H_1 in a pair of parallel lines, A plane with a slope equal 1 not containing the origin intersects H_1 in a parabola, A tangential plane intersects H_1 in a pair of intersecting lines, A non-tangential plane with a slope greater than 1 intersects H_1 in a hyperbola. Obviously, any one-sheet hyperboloid of revolution contains circles.

This is also true, but less obvious, in the general case (see circular section).

Hyperboloid of two sheets

The hyperboloid of two sheets does not contain lines. The discussion of plane sections can be performed for the unit hyperboloid of two sheets with equation H_2: \ x^2+y^2-z^2 = -1. which can be generated by a rotating hyperbola around one of its axes (the one that cuts the hyperbola) A plane with slope less than 1 (1 is the slope of the asymptotes of the generating hyperbola) intersects H_2 either in an ellipse or in a point or not at all, A plane with slope equal to 1 containing the origin (midpoint of the hyperboloid) does not intersect H_2 , A plane with slope equal to 1 not containing the origin intersects H_2 in a parabola, A plane with slope greater than 1 intersects H_2 in a hyperbola.

Obviously, any two-sheet hyperboloid of revolution contains circles. This is also true, but less obvious, in the general case (see circular section).

Remark: A hyperboloid of two sheets is projectively equivalent to a sphere. \frac{x^2}{a^2} + \frac{y^2}{b^2} - \frac{z^2}{c^2} = 1 , \quad \frac{x^2}{a^2} + \frac{y^2}{b^2} - \frac{z^2}{c^2} = -1 are pointsymmetric to the origin, symmetric to the coordinate planes and rotational symmetric to the z-axis and symmetric to any plane containing the z-axis, in case of a=b (hyperboloid of revolution). q(x) = \left(x_1^2+\cdots + x_k^2\right)-\left(x_{k+1}^2+\cdots + x_n^2\right), \quad k When is any constant, then the part of the space given by \lbrace x \ :\ q(x) = c \rbrace is called a hyperboloid. The degenerate case corresponds to .

As an example, consider the following passage: ... the velocity vectors always lie on a surface which Minkowski calls a four-dimensional hyperboloid since, expressed in terms of purely real coordinates , its equation is , analogous to the hyperboloid of three-dimensional space. However, the term quasi-sphere is also used in this context since the sphere and hyperboloid have some commonality (See below).

Adziogol hyperboloid Lighthouse by Vladimir Shukhov 1911.jpg|The Adziogol Lighthouse, Ukraine, 1911. Staatsmijn Emma Koeltoren III - Brunssum - 20260911 - RCE.jpg|The first 1916 patented Van Iterson cooling tower of DSM Emma in Heerlen, The Netherlands, 1918 Kobe port tower11s3200.jpg|Kobe Port Tower, Japan, 1963.

Mcdonnell planetarium slsc.jpg|Saint Louis Science Center's James S. McDonnell Planetarium, St. Louis, Missouri, 1963. Newcastle International Airport Control Tower.jpg|Newcastle International Airport control tower, Newcastle upon Tyne, England, 1967. Jested 002.JPG|Ještěd Transmission Tower, Czech Republic, 1968.

Catedral1 Rodrigo Marfan.jpg|Cathedral of Brasília, Brazil, 1970. Ciechanow_water_tower.jpg|Hyperboloid water tower with toroidal tank, Ciechanów, Poland, 1972. Toronto - ON - Roy Thomson Hall.jpg|Roy Thomson Hall, Toronto, Canada, 1982.

Thtr300 kuehlturm.jpg|The THTR-300 cooling tower for the now decommissioned thorium nuclear reactor in Hamm-Uentrop, Germany, 1983. Bridge over Corporation Street - geograph.org.uk - 809089.jpg|The Corporation Street Bridge, Manchester, England, 1999. Killesberg Tower.jpg|The Killesberg observation tower, Stuttgart, Germany, 2001.

BMW-Welt at night 2.JPG|BMW Welt, (BMW World), museum and event venue, Munich, Germany, 2007. Canton tower in asian games opening ceremony.jpg|The Canton Tower, China, 2010. Les Essarts-le-Roi Château d'eau.JPG|The Essarts-le-Roi water tower, France.

P = \left\{ p \; : \; w^2 = x^2 + y^2 + z^2 \right\} and H_r = \lbrace p \ :\ w = r \rbrace , which is a hyperplane. Then P \cap H_r is the sphere with radius . On the other hand, the conical hypersurface In the theory of quadratic forms, a unit quasi-sphere is the subset of a quadratic space consisting of the such that the quadratic norm of is one.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352187531 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.