Hyperfocal distance

28mm lens with markings for the depth of field.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 11 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

28mm lens with markings for the depth of field. The lens is set at the hyperfocal distance for . The orange mark corresponding to is at the infinity mark ( ).

Focus is acceptable from under to infinity. 100–300 mm zoom lens. The depth of field, and thus hyperfocal distance, changes with the focal length as well as the f-stop.

This lens is set to the hyperfocal distance for at a focal length of . In optics and photography, hyperfocal distance is a distance from a lens beyond which all objects can be brought into an "acceptable" focus. As the hyperfocal distance is the focus distance giving the maximum depth of field, it is the most desirable distance to set the focus of a fixed-focus camera.

The hyperfocal distance is entirely dependent upon what level of sharpness is considered to be acceptable. The hyperfocal distance has a property called "consecutive depths of field", where a lens focused at an object whose distance from the lens is at the hyperfocal distance will hold a depth of field from to infinity, if the lens is focused to , the depth of field will be from to ; if the lens is then focused to , the depth of field will be from to , etc. Thomas Sutton and George Dawson first wrote about hyperfocal distance (or "focal range") in 1867.

Louis Derr in 1906 may have been the first to derive a formula for hyperfocal distance.…

28mm lens with markings for the depth of field. The lens is set at the hyperfocal distance for . The orange mark corresponding to is at the infinity mark ( ).

Focus is acceptable from under to infinity.]] 100–300 mm zoom lens. The depth of field, and thus hyperfocal distance, changes with the focal length as well as the f-stop.

This lens is set to the hyperfocal distance for at a focal length of .]] In optics and photography, hyperfocal distance is a distance from a lens beyond which all objects can be brought into an "acceptable" focus. As the hyperfocal distance is the focus distance giving the maximum depth of field, it is the most desirable distance to set the focus of a fixed-focus camera.

The hyperfocal distance is entirely dependent upon what level of sharpness is considered to be acceptable. The hyperfocal distance has a property called "consecutive depths of field", where a lens focused at an object whose distance from the lens is at the hyperfocal distance will hold a depth of field from to infinity, if the lens is focused to , the depth of field will be from to ; if the lens is then focused to , the depth of field will be from to , etc. Thomas Sutton and George Dawson first wrote about hyperfocal distance (or "focal range") in 1867.

Louis Derr in 1906 may have been the first to derive a formula for hyperfocal distance. Rudolf Kingslake wrote in 1951 about the two methods of measuring hyperfocal distance. Some cameras have their hyperfocal distance marked on the focus dial.

For example, on the Minox LX focusing dial there is a red dot between and infinity; when the lens is set at the red dot, that is, focused at the hyperfocal distance, the depth of field stretches from to infinity. Some lenses have markings indicating the hyperfocal range for specific f-stops, also called a depth-of-field scale.

Acceptable sharpness

The hyperfocal distance is entirely dependent upon what level of sharpness is considered to be acceptable. The criterion for the desired acceptable sharpness is specified through the circle of confusion (CoC) diameter limit. This criterion is the largest acceptable spot size diameter that an infinitesimal point is allowed to spread out to on the imaging medium (film, digital sensor, etc.).

Formula

For the first definition, H = \frac{f^2}{N c} + f where is the hyperfocal distance; is the focal length of the lens; is f-number ( for aperture diameter ); and is the circle of confusion limit. For any practical f-number, the added focal length is insignificant in comparison with the first term, so that H \approx \frac{f^2}{N c}\,.

This formula is exact for the second definition, if is measured from a thin lens, or from the front principal plane of a complex lens; it is also exact for the first definition if is measured from a point that is one focal length in front of the front principal plane. For practical purposes, there is little difference between the first and second definitions.

Derivation using geometric optics

The following derivations refer to the accompanying figures. For clarity, half the aperture and circle of confusion are indicated.

Definition 1

An object at distance forms a sharp image at distance (blue line). Here, objects at infinity have images with a circle of confusion indicated by the brown ellipse where the upper red ray through the focal point intersects the blue line.

First using similar triangles hatched in green, \begin{array}{crcl} & \dfrac{x-f}{c/2} & = & \dfrac{f}{D/2} \\ \therefore & x-f & = & \dfrac{cf}{D} \\ \therefore & x & = & f+\dfrac{cf}{D} \end{array} Then using similar triangles dotted in purple, \begin{array}{crclcl} & \dfrac{H}{D/2} & = & \dfrac{x}{c/2} \\ \therefore & H & = & \dfrac{Dx}{c} & = & \dfrac{D}{c}\Big(f+\dfrac{cf}{D}\Big) \\ & & = & \dfrac{Df}{c}+f & = & \dfrac{f^2}{Nc}+f \end{array} as found above.

Definition 2

Objects at infinity form sharp images at the focal length (blue line). Here, an object at forms an image with a circle of confusion indicated by the brown ellipse where the lower red ray converging to its sharp image intersects the blue line. Using similar triangles shaded in yellow, \begin{array}{crclcl} & \dfrac{H}{D/2} & = & \dfrac{f}{c/2} \\ \therefore & H & = & \dfrac{Df}{c} & = & \dfrac{f^2}{Nc} \end{array}

Example

As an example, for a lens at using a circle of confusion of , which is a value typically used in photography, the hyperfocal distance according to Definition 1 is H = \frac{(50)^2}{(8)(0.03)} + (50) = 10467 \mbox{ mm} If the lens is focused at a distance of , then everything from half that distance ( ) to infinity will be acceptably sharp in our photograph. With the formula for the Definition 2, the result is , a difference of 0.5%.

History

The concepts of the two definitions of hyperfocal distance have a long history, tied up with the terminology for depth of field, depth of focus, circle of confusion, etc. Here are some selected early quotations and interpretations on the topic.

Sutton and Dawson 1867

Thomas Sutton and George Dawson define focal range for what we now call hyperfocal distance: Their focal range is about 1000 times their aperture diameter, so it makes sense as a hyperfocal distance with CoC value of , or image format diagonal times 1/1000 assuming the lens is a "normal" lens. What is not clear, however, is whether the focal range they cite was computed, or empirical.

Abney 1881

Sir William de Wivelesley Abney says: That is, is the reciprocal of what we now call the f-number, and the answer is evidently in meters. His 0.41 should obviously be 0.40. Based on his formulae, and on the notion that the aperture ratio should be kept fixed in comparisons across formats, Abney says:

Taylor 1892

John Traill Taylor recalls this word formula for a sort of hyperfocal distance: This formula implies a stricter CoC criterion than we typically use today.

Hodges 1895

John Hodges discusses depth of field without formulas but with some of these relationships: This "mathematically" observed relationship implies that he had a formula at hand, and a parameterization with the f-number or "intensity ratio" in it. To get an inverse-square relation to focal length, you have to assume that the CoC limit is fixed and the aperture diameter scales with the focal length, giving a constant f-number.

Piper 1901

C. Welborne Piper may be the first to have published a clear distinction between Depth of Field in the modern sense and Depth of Definition in the focal plane, and implies that Depth of Focus and Depth of Distance are sometimes used for the former (in modern usage, Depth of Focus is usually reserved for the latter). He uses the term Depth Constant for , and measures it from the front principal focus (i. e., he counts one focal length less than the distance from the lens to get the simpler formula), and even introduces the modern term: It is unclear what distinction he means.

Adjacent to Table I in his appendix, he further notes: At this point we do not have evidence of the term hyperfocal before Piper, nor the hyphenated hyper-focal which he also used, but he obviously did not claim to coin this descriptor himself.

Derr 1906

Louis Derr may be the first to clearly specify the first definition, which is considered to be the strictly correct one in modern times, and to derive the formula corresponding to it. Using for hyperfocal distance, for aperture diameter, for the diameter that a circle of confusion shall not exceed, and for focal length, he derives: p = \frac{(D + d) f}{d}\,.

As the aperture diameter, is the ratio of the focal length to the numerical aperture ( ); and the diameter of the circle of confusion, , this gives the equation for the first definition above. p = \frac{\left(\tfrac{f}{N} + c\right) f}{c} = \frac{f^2}{N c} + f

Johnson 1909

George Lindsay Johnson uses the term Depth of Field for what Abney called Depth of Focus, and Depth of Focus in the modern sense (possibly for the first time), as the allowable distance error in the focal plane. His definitions include hyperfocal distance: His drawing makes it clear that his is the radius of the circle of confusion.

He has clearly anticipated the need to tie it to format size or enlargement, but has not given a general scheme for choosing it. Johnson's use of former and latter seem to be swapped; perhaps former was here meant to refer to the immediately preceding section title Depth of Focus, and latter to the current section title Depth of Field.

Except for an obvious factor-of-2 error in using the ratio of stop diameter to CoC radius, this definition is the same as Abney's hyperfocal distance.

Others, early twentieth century

The term hyperfocal distance also appears in Cassell's Cyclopaedia of 1911, The Sinclair Handbook of Photography of 1913, and Bayley's The Complete Photographer of 1914.

Kingslake 1951

Rudolf Kingslake is explicit about the two meanings: Kingslake uses the simplest formulae for DOF near and far distances, which has the effect of making the two different definitions of hyperfocal distance give identical values.

See also

Circle of confusion Deep focus

http://www.dofmaster.com/dofjs.html to calculate hyperfocal distance and depth of field

Text derived from https://en.wikipedia.org/w/index.php?oldid=1356333224 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.