Lesson plan
I2C
I 2 C (Inter-Integrated Circuit; pronounced as " " or " "), alternatively known as I2C and IIC, is a synchronous, multi-master/multi-slave, single-ended, serial communication bus invented in 1980 by Philips Semiconductors (now NXP Semiconductors). It is widely used for attaching lower-speed peripheral integrated circuits (ICs) to processors and microcontrollers in short-distance, intra-board communication. The I 2 C bus can be found in a wide range of electronics applications where simplicity and low manufacturing cost are more important than speed. PC components and systems which involve I 2 C include serial presence detect (SPD) EEPROMs on dual in-line memory modules (DIMMs) and Extended Display Identification Data (EDID) for monitors via VGA, DVI, and HDMI connectors. Common I 2 C applications include reading hardware monitors, sensors, real-time clocks, controlling actuators, accessing low-speed DACs and ADCs, controlling simple LCD or OLED displays, changing computer display settings (e.g., backlight, contrast, hue, color balance) via Display Data Channel, and changing speaker volume. A particular strength of I 2 C is the capability of a microcontroller to control a network of device chips with just two general-purpose I/O pins.…
Article summary
I 2 C (Inter-Integrated Circuit; pronounced as " " or " "), alternatively known as I2C and IIC, is a synchronous, multi-master/multi-slave, single-ended, serial communication bus invented in 1980 by Philips Semiconductors (now NXP Semiconductors). It is widely used for attaching lower-speed peripheral integrated circuits (ICs) to processors and microcontrollers in short-distance, intra-board communication. The I 2 C bus can be found in a wide range of electronics applications where simplicity and low manufacturing cost are more important than speed. PC components and systems which involve I 2 C include serial presence detect (SPD) EEPROMs on dual in-line memory modules (DIMMs) and Extended Display Identification Data (EDID) for monitors via VGA, DVI, and HDMI connectors. Common I 2 C applications include reading hardware monitors, sensors, real-time clocks, controlling actuators, accessing low-speed DACs and ADCs, controlling simple LCD or OLED displays, changing computer display settings (e.g., backlight, contrast, hue, color balance) via Display Data Channel, and changing speaker volume. A particular strength of I 2 C is the capability of a microcontroller to control a network of device chips with just two general-purpose I/O pins.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.