Lesson plan

IAR 111

The IAR-111 Excelsior was a cancelled supersonic mothership aircraft designed by the Romanian aerospace firm ARCA Space Corporation. It had ambitions of being the first supersonic aircraft produced by Romania. The IAR 111 was intended to replace ARCA's use of carrier balloons for transporting rockets to orbit. Specifically, it was intended to transport a rocket payload up to as well as to support the wider development of technologies related to space tourism. The IAR was stated to be capable of Mach 1.5 at 16,000 meters while carrying the Haas 2 rocket, the IAR 111 was projected to be capable of attaining Mach 1.5 at 16,000 meters, and of Mach 2.6 at 30,000 meters while configured for space tourism development work. The cockpit, which was intended to accommodate a two-person crew in a tandem arrangement, was detachable and furnished with a pair of parachutes to slow its descent. As envisioned, the IAR 111 was to be constructed almost entirely from composite materials, powered by ARCA's in-house Executor liquid-fuelled rocket engine, and was to be designed for take-off and landing from the sea surface. The existence of the IAR 111 was announced in December 2010, although work had reportedly been underway for several years beforehand.…

Back to article

Article summary

The IAR-111 Excelsior was a cancelled supersonic mothership aircraft designed by the Romanian aerospace firm ARCA Space Corporation. It had ambitions of being the first supersonic aircraft produced by Romania. The IAR 111 was intended to replace ARCA's use of carrier balloons for transporting rockets to orbit. Specifically, it was intended to transport a rocket payload up to as well as to support the wider development of technologies related to space tourism. The IAR was stated to be capable of Mach 1.5 at 16,000 meters while carrying the Haas 2 rocket, the IAR 111 was projected to be capable of attaining Mach 1.5 at 16,000 meters, and of Mach 2.6 at 30,000 meters while configured for space tourism development work. The cockpit, which was intended to accommodate a two-person crew in a tandem arrangement, was detachable and furnished with a pair of parachutes to slow its descent. As envisioned, the IAR 111 was to be constructed almost entirely from composite materials, powered by ARCA's in-house Executor liquid-fuelled rocket engine, and was to be designed for take-off and landing from the sea surface. The existence of the IAR 111 was announced in December 2010, although work had reportedly been underway for several years beforehand.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.