Lesson plan

IBM PALM processor

The PALM (Program All Logic in Microcode ) is a 16-bit central processing unit (CPU) developed by IBM. It was used in the IBM 5100 Portable Computer, a predecessor of the IBM PC, and the IBM 5110 and IBM 5120 follow-on machines. It is likely PALM was also used in other IBM products as an embedded controller. IBM referred to PALM as a microprocessor, though they used that term to mean a processor that executes microcode to implement a higher-level instruction set, rather than its conventional definition of a CPU on an integrated circuit. The PALM processor was a circuit board containing 13 bipolar gate arrays packaged in square metal cans, 3 conventional transistor–transistor logic (TTL) ICs in dual in-line packages, and 1 round metal can part. The PALM was used to implement an emulator, which in turn could run machine instructions originally written for other machines; this is how IBM System/360 APL ran on the 5100. PALM has a 16-bit data bus, with two additional bits used for parity. PALM can directly address 64 KB (64 KiB) of memory. The IBM 5100 could be configured with up to 64+ KB (APL + BASIC ROMs make 64+ KB) of Executable ROS (ROM) and up to 64 KB of RAM. A simple bank switching scheme was used to extend the address space.…

Back to article

Article summary

The PALM (Program All Logic in Microcode ) is a 16-bit central processing unit (CPU) developed by IBM. It was used in the IBM 5100 Portable Computer, a predecessor of the IBM PC, and the IBM 5110 and IBM 5120 follow-on machines. It is likely PALM was also used in other IBM products as an embedded controller. IBM referred to PALM as a microprocessor, though they used that term to mean a processor that executes microcode to implement a higher-level instruction set, rather than its conventional definition of a CPU on an integrated circuit. The PALM processor was a circuit board containing 13 bipolar gate arrays packaged in square metal cans, 3 conventional transistor–transistor logic (TTL) ICs in dual in-line packages, and 1 round metal can part. The PALM was used to implement an emulator, which in turn could run machine instructions originally written for other machines; this is how IBM System/360 APL ran on the 5100. PALM has a 16-bit data bus, with two additional bits used for parity. PALM can directly address 64 KB (64 KiB) of memory. The IBM 5100 could be configured with up to 64+ KB (APL + BASIC ROMs make 64+ KB) of Executable ROS (ROM) and up to 64 KB of RAM. A simple bank switching scheme was used to extend the address space.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.