Ice axe
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
An ice axe is a multi-purpose hiking and climbing tool used by mountaineers in both the ascent and descent of routes that involve snow or ice covered (e.g. ice climbing or mixed climbing) conditions. Its use depends on the terrain: in its simplest role it is used like a walking stick, with the mountaineer holding the head in the center of their uphill hand. On steep terrain it is swung by its handle and embedded in snow or ice for security and an aid to traction. It can also be buried pick down, the rope tied around the shaft to form a secure anchor on which to bring up a second climber, or buried vertically to form a stomp belay. The adze is used to cut footholds, as well as scoop out compacted snow to bury the axe as a belay anchor.
An ice axe is a multi-purpose hiking and climbing tool used by mountaineers in both the ascent and descent of routes that involve snow or ice covered (e.g. ice climbing or mixed climbing) conditions. Its use depends on the terrain: in its simplest role it is used like a walking stick, with the mountaineer holding the head in the center of their uphill hand. On steep terrain it is swung by its handle and embedded in snow or ice for security and an aid to traction. It can also be buried pick down, the rope tied around the shaft to form a secure anchor on which to bring up a second climber, or buried vertically to form a stomp belay. The adze is used to cut footholds, as well as scoop out compacted snow to bury the axe as a belay anchor.
Components
An ice axe consists of at least five components: Head – usually made of steel and featuring a pick and adze. A hole in the center is provided for attaching a wrist leash or carabiner. Pick — the toothed pointed end of the head, typically slightly curved (aiding both in ergonomics and self-arrest). Adze — the flat, wide end of the head used for chopping steps in hard snow and ice. Hammer — the hammer is an alternative to the adze. May be used for aiding placement of protection.
Shaft — straight or slightly angled, typically wider front-to-back than side-to-side, flat on the sides and smoothly rounded on the ends. Traditional shafts were made of wood, but are now almost exclusively of lightweight metals (such as aluminum, titanium and steel alloys) or composites (including fiberglass, Kevlar or carbon filament). Spike, or ferrule — a point at the base of the shaft used for balance and safety when the axe is held by its head in walking stick fashion. Usually made of steel.
Accessories
Ice axe accessories include: Leash – nylon webbing with an adjustable loop for securing the axe to hand. Often secured by a ring constrained to slide a limited distance on the shaft. Leash stop – a rubber keeper or metal stud preventing the leash from slipping off of the ice axe. Snow basket – similar to baskets on ski poles, temporarily mounted on the shaft close to the spike to keep the shaft from sinking into soft snow. Not at all common in Europe. Pick and adze guard – a cover to protect from sharp edges and points when the axe is not being used. Spike guard – a cover to protect from the sharp spike when the axe is not being used.
Size
Ice-axe spike-to-head lengths used to generally range from . This is just too short to be used as a walking stick on level ground (the way its forebear, the 19th century alpenstock, was), but is ergonomic when ascending steep slopes. For flatter ground, where consequences of a slip are not large, walking poles are more appropriate. The old method to approximate the correct length of an ice axe was for the climber to hold the axe (spike facing the ground) at his/her side while standing relaxed.
The spike of the ice axe should barely touch the ground when the climber stands fully upright holding the axe in this manner. This may still be appropriate when the ice axe is to be used on relatively flat ground, most likely in glacier travel. Modern mountaineers often carry shorter ice axes , for general use, with anything over typically regarded as too large and unwieldy for chopping steps or climbing steep snow.
Gallery of ice axes 1970s–2010s
Image:Ice axe Stubai 1970s.JPG|A wooden handled ice axe from the mid-1970s Length: Weight: Image:Ice axe CAMP 1970s.JPG|A metal handled ice axe from the late 1970s Length: Weight: Image:Ice axe CAMP Corsa.JPG|A lightweight CAMP Corsa ice axe purchased in 2007 Length: Weight: File:Black Diamond Ice Axe.JPG|A 2011 Black Diamond ice axe. long with a weight of
Attachment to a pack
. A pair is provided on each side, here with a ice axe on the left and a ice hammer on the right. When not in use an ice axe is stored on the outside of a pack (rucksack). Many models come with a nylon webbing loop sewn on its rear base (off to one side to allow the pick to stay behind the hiker), together with a means to restrain its shaft. Rucksacks with attachment points for two ice axes are also available, popular in ice climbing where two tools are used.
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1365846792 under CC BY-SA 4.0; modifications have been made.