Ice protection system

research aircraft In aeronautics, ice protection systems keep atmospheric moisture from accumulating on aircraft surfaces, such as wings, propellers, rotor blades, engine intakes, and environmental control intakes.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

research aircraft In aeronautics, ice protection systems keep atmospheric moisture from accumulating on aircraft surfaces, such as wings, propellers, rotor blades, engine intakes, and environmental control intakes. Ice buildup can change the shape of airfoils and flight control surfaces, degrading control and handling characteristics as well as performance.

An anti-icing, de-icing, or ice protection system either prevents formation of ice, or enables the aircraft to shed the ice before it becomes dangerous.

research aircraft]] In aeronautics, ice protection systems keep atmospheric moisture from accumulating on aircraft surfaces, such as wings, propellers, rotor blades, engine intakes, and environmental control intakes. Ice buildup can change the shape of airfoils and flight control surfaces, degrading control and handling characteristics as well as performance.

An anti-icing, de-icing, or ice protection system either prevents formation of ice, or enables the aircraft to shed the ice before it becomes dangerous.

Effects of icing

]] Aircraft icing increases weight and drag, decreases lift, and can decrease thrust. Ice reduces engine power by blocking air intakes. When ice builds up by freezing upon impact or freezing as runoff, it changes the aerodynamics of the surface by modifying the shape and the smoothness of the surface which increases drag, and decreases wing lift or propeller thrust.

Both a decrease in lift on the wing due to an altered airfoil shape, and the increase in weight from the ice load will usually result having to fly at a greater angle of attack to compensate for lost lift to maintain altitude. This increases fuel consumption and further reduces speed, making a stall more likely to occur, causing the aircraft to lose altitude.

Ice accumulates on helicopter rotor blades and aircraft propellers causing weight and aerodynamic imbalances that are amplified due to their rotation. Anti-ice systems installed on jet engines or turboprops help prevent airflow problems and avert the risk of serious internal engine damage from ingested ice.

These concerns are most acute with turboprops, which more often have sharp turns in the intake path where ice tends to accumulate.

Fluid deicing

is sprayed from hub outward to cover blades]] Sometimes called a weeping wing, running wet, or evaporative system, these systems use a deicing fluid, typically based on ethylene glycol or isopropyl alcohol, to prevent ice forming and to break up accumulated ice on critical surfaces of an aircraft. One or two electrically-driven pumps send the fluid to proportioning units that divide the flow between areas to be protected.

A second pump is used for redundancy, especially for aircraft certified for flight into known icing conditions, with additional mechanical pumps for the windshield. Fluid is forced through holes in panels on the leading edges of the wings, horizontal stabilizers, fairings, struts, engine inlets, and from a slinger-ring on the propeller and the windshield sprayer.

These panels have diameter holes drilled in them, with . The system is self cleaning, and the fluid helps clean the aircraft, before it is blown away by the slipstream. The system was initially used during World War II by the British, having been developed by Tecalemit-Kilfrost-Sheepbridge Stokes (TKS).

Advantages of fluid systems are mechanical simplicity and minimal airflow disruption from the minuscule holes; this made the systems popular in older business jets. Disadvantages are greater maintenance requirements than pneumatic boots, the weight of potentially unneeded fluid aboard the aircraft, the finite supply of fluid when it is needed, and the unpredictable need to refill the fluid, which complicates en route stops.

Passive (icephobic coatings)

Passive systems employ icephobic surfaces. Icephobicity is analogous to hydrophobicity and describes a material property that is resistant to icing. The term is not well defined but generally includes three properties: low adhesion between ice and the surface, prevention of ice formation, and a repellent effect on supercooled droplets.

Icephobicity requires special material properties but is not identical to hydrophobicity. To minimize accretion, researchers are seeking icephobic materials. Candidates include carbon nanotubes and slippery liquid infused porous surfaces (SLIPS) which repel water when it forms into ice.

SAE paper on Electro-Thermal Ice Protection by Strehlow, R. and Moser, R.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376335104 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.