ICESat-2
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
ICESat-2 (Ice, Cloud, and land Elevation Satellite 2), part of NASA's Earth Observing System, is a satellite mission for measuring ice sheet elevation and sea ice thickness, as well as land topography, vegetation characteristics, and clouds. ICESat-2, a follow-on to the ICESat mission, was launched on 15 September 2018 onboard Delta II as the final flight from Vandenberg Air Force Base in California, into a near-circular, near-polar orbit with an altitude of approximately .
Evidence and sources
It was designed to operate for three years and carry enough propellant for seven years. The satellite orbits Earth at a speed of . The ICESat-2 mission was designed to provide elevation data needed to determine ice sheet mass balance as well as vegetation canopy information. For over six years, it has delivered precise topographic data across ice sheets, oceans, land, lakes, reservoirs and cities worldwide, in addition to focused polar coverage.
Impact
ICESat-2 also has the ability to detect seafloor topography up to 100 feet (30m) below the surface in clear watered coastal areas. Because the great changes of polar ice cover in global warming are not quantified, one of the main purposes of ICESat-2 is measuring the changing of the elevation of ice sheets by its laser system and lidar to quantify the influence of melting ice sheet in sea-level raising.…
ICESat-2 (Ice, Cloud, and land Elevation Satellite 2), part of NASA's Earth Observing System, is a satellite mission for measuring ice sheet elevation and sea ice thickness, as well as land topography, vegetation characteristics, and clouds. ICESat-2, a follow-on to the ICESat mission, was launched on 15 September 2018 onboard Delta II as the final flight from Vandenberg Air Force Base in California, into a near-circular, near-polar orbit with an altitude of approximately .
It was designed to operate for three years and carry enough propellant for seven years. The satellite orbits Earth at a speed of . The ICESat-2 mission was designed to provide elevation data needed to determine ice sheet mass balance as well as vegetation canopy information. For over six years, it has delivered precise topographic data across ice sheets, oceans, land, lakes, reservoirs and cities worldwide, in addition to focused polar coverage.
ICESat-2 also has the ability to detect seafloor topography up to 100 feet (30m) below the surface in clear watered coastal areas. Because the great changes of polar ice cover in global warming are not quantified, one of the main purposes of ICESat-2 is measuring the changing of the elevation of ice sheets by its laser system and lidar to quantify the influence of melting ice sheet in sea-level raising. Additionally, the high accuracy of multiple pulses allows collecting measurement of the heights of sea ice to analyze its change rate during the time.
The ICESat-2 spacecraft was built and tested by Northrop Grumman Innovation Systems in Gilbert, Arizona, while the on board instrument, ATLAS, was built and managed by Goddard Space Flight Center in Greenbelt, Maryland. The ATLAS instrument was designed and built by the center, and the bus was built by and integrated with the instrument by Orbital Sciences (later Orbital ATK). The satellite was launched on a Delta II rocket provided by United Launch Alliance.
This was the last launch of the Delta II rocket, and the last launch of a rocket derived from the PGM-17 Thor missile. ATLAS emits visible laser pulses at 532 nm wavelength ( Green ). As ICESat-2 orbits, ATLAS generates six beams arranged in three pairs in order to better determine the surface's slope and provide more ground coverage. Its predecessor, ICESat, had only one laser beam. The greater number of lasers allows for improved coverage of Earth's surface.
Each beam pair is apart across the beam track, and each beam in a pair is separated by along the beam track. The laser array is rotated 2 degrees from the satellite's ground track so that a beam pair track is separated by about . The laser pulse rate combined with satellite speed results in ATLAS taking an elevation measurement every along the satellite's ground path. The laser fires at a rate of 10 kHz.
Each pulse sends out about 20 trillion photons, almost all of which are dispersed or deflected as the pulse travels to Earth's surface and bounces back to the satellite. About a dozen photons from each pulse return to the instrument and are collected with a beryllium telescope. Beryllium has high specific strength and holds its shape across a large range of temperatures. The telescope collects photons with wavelength of 532 nm, thus filters out irrelevant light in the atmosphere.
Computer programs further identify 532 nm photons in the dataset; only reflected photons of the laser are kept for analysis. A notable attribute of ATLAS is that engineers enabled the satellite to control how it is positioned in space, which is relevant because ATLAS records the distance from itself to the ground, and if its position is off, the measurement recorded for Earth's elevation will be off as well. Engineers also constructed the laser reference system, which confirms that the laser is adjusted in accordance to the telescope.
If either the telescope or the laser is off, the satellite can make its own adjustments accordingly. The National Snow and Ice Data Center Distributed Active Archive Center manages ICESat-2 science data.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1359931658 under CC BY-SA 4.0; modifications have been made.