IEC 62196

IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles is a series of international standards that define requirements and tests for plugs, socket-outlets, vehicle connectors and…

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles is a series of international standards that define requirements and tests for plugs, socket-outlets, vehicle connectors and vehicle inlets for the conductive charging of electric vehicles. It is published by the International Electrotechnical Commission (IEC) and is developed and maintained by its technical committee TC23 subcommittee SC23H (which prepares standards for Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles).

Accessories (that is plugs, socket-outlets, vehicle connectors and vehicle inlets as defined by IEC 62196) together with their cable assemblies provide physical connections between electric vehicle supply equipment (abbreviated EVSE, as defined by IEC 61851 or by IEC 62752) and electric vehicles (abbreviated EV, as defined by ISO 17409 or by ISO 18246). Accessories have contacts that conduct electricity, and according to ISO62196 most connectors also provide additional contacts that support specific functions that are relevant to charging of electric vehicles, e.g. to ensure that power is not supplied unless a vehicle is connected and is immobilized.

Several parts of this series of standards have been published as European Standards (EN 62196 series), which in turn have been published as British Standards (BS EN 62196 series). Similar requirements are contained in SAE J1772, which is widely applied in the United States.

Published standards

The following parts of the IEC 62196 series have been published: Part 1: General requirements Part 2: Dimensional compatibility requirements for A.C. pin and contact-tube accessories Part 3: Dimensional compatibility and interchangeability requirements for D.C. and A.C./D.C. pin and contact-tube vehicle couplers Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system Specification 62196-4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications Part 6: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protection relies on electrical separation Specification 62196-7: Vehicle adapter is in development (publication expected in 2026), as well as other specifications and updates (as of December 2025). Directive 2014/94/EU of the European Parliament and of the Council of 22 October 2014 on the deployment of alternative fuels infrastructure

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351302003 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001351302003 · captured 2026-04-27 · ledger · version history

Cite this page as: encyclopegia.org, “IEC 62196”, snapshot enwiki-001351302003. https://encyclopegia.org/a/iec-62196

Sources cited in this revision

19 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.