Lesson plan

IFF Mark X

IFF Mark X was the NATO standard military identification friend or foe transponder system from the early 1950s until it was slowly replaced by the IFF Mark XII in the 1970s. It was also adopted by ICAO, with some modifications, as the civilian air traffic control (ATC) secondary radar (SSR) transponder. The X in the name does not mean "tenth", but "eXperimental". Later IFF models acted as if it was the tenth in the series and used subsequent numbers. For most of World War II the standard IFF system used by the allied air forces was the IFF Mark III. Mark III responded on the same frequency as the trigger signal, returning a selected pulse pattern. Originally, the Mark X was simply a version of Mark III operating at a higher frequency, which has several practical advantages. Three return patterns, or Modes, were available. As it was being introduced, the new Selective Identification Feature, or SIF, allowed the response signal to be modified with bit encoding, providing the ability for each aircraft to produce a unique response using octal digits. This was initially handled through a separate box that connected to the original Mark X. For a brief time in 1957 this was known as IFF Mark XI before becoming IFF Mark X (SIF).…

Back to article

Article summary

IFF Mark X was the NATO standard military identification friend or foe transponder system from the early 1950s until it was slowly replaced by the IFF Mark XII in the 1970s. It was also adopted by ICAO, with some modifications, as the civilian air traffic control (ATC) secondary radar (SSR) transponder. The X in the name does not mean "tenth", but "eXperimental". Later IFF models acted as if it was the tenth in the series and used subsequent numbers. For most of World War II the standard IFF system used by the allied air forces was the IFF Mark III. Mark III responded on the same frequency as the trigger signal, returning a selected pulse pattern. Originally, the Mark X was simply a version of Mark III operating at a higher frequency, which has several practical advantages. Three return patterns, or Modes, were available. As it was being introduced, the new Selective Identification Feature, or SIF, allowed the response signal to be modified with bit encoding, providing the ability for each aircraft to produce a unique response using octal digits. This was initially handled through a separate box that connected to the original Mark X. For a brief time in 1957 this was known as IFF Mark XI before becoming IFF Mark X (SIF).…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.