Immersion chiller

Immersion chillers work by circulating a cooling fluid (usually tap water from a garden hose or faucet) through a copper/stainless steel coil that is placed directly in the hot wort.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Immersion chillers work by circulating a cooling fluid (usually tap water from a garden hose or faucet) through a copper/stainless steel coil that is placed directly in the hot wort. As the cooling fluid runs through the coil it absorbs and carries away heat until the wort has cooled to the desired temperature.

The advantage of using a copper or stainless steel immersion chiller is the lower risk of contamination versus other methods when used in an amateur or homebrewing environment. The clean chiller is placed directly in the still boiling wort and thus sanitized before the cooling process begins.

See also

Brewing#Wort cooling coolship, alternate equipment for cooling

Text derived from https://en.wikipedia.org/w/index.php?oldid=1219429877 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.