Impinging mixer

Impinging mixers combine and disperse resins within each other, and are often used in reaction injection molding (RIM).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Impinging mixers combine and disperse resins within each other, and are often used in reaction injection molding (RIM). Mixing occurs as two high velocity streams collide in a mixing chamber. High velocity results in a turbulent rather than a laminar flow.

Impingement mixing is most effective when it occurs at the center of the mixing chamber. Thermosetting plastics cure by a chemical reaction between two resins. The resins must be mixed immediately before they are injected into a mold.

The mixing can be done by impingement mixing, where two streams to collide at high velocity in a mixing chamber. As soon as the mixing chamber is full, a piston immediately pushes the mixed resin into the mold, leaving very little mixed resin curing outside the mold.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1305983370 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001305983370 · captured 1755234094.0 · version history

Cite this page as: encyclopegia.org, “Impinging mixer”, snapshot enwiki-001305983370. https://encyclopegia.org/a/impinging-mixer

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.