Impulse (physics)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In classical mechanics, impulse (symbolized by or Imp) is the change in momentum of an object. It is most often used to describe forces which act over short time periods, specifically in the case of impacts and collisions, for which it gets its namesake. Impulse is a vector quantity, meaning it has both a magnitude, which describes the amount by which the momentum changed, and a direction, which describes the direction in which the momentum changed. For a force acting over a short time, the impulse is often idealized so that the change in momentum produced by the force is modelled as happening instantaneously. This sort of change is a step change, and is not physically possible. However, this is a useful model for computing the effects of ideal collisions (such as in videogame physics engines). Additionally, in rocketry, the term "total impulse" is commonly used and is considered synonymous with the term "impulse". Impulse has the same units and dimensions as momentum. The SI unit of impulse is the newton-second ( ), and the dimensionally equivalent unit of momentum is the kilogram-metre per second ( ). The corresponding English engineering unit is the pound-second ( ), and in the British Gravitational System, the unit is the slug-foot per second ( ).

In classical mechanics, impulse (symbolized by or Imp) is the change in momentum of an object. It is most often used to describe forces which act over short time periods, specifically in the case of impacts and collisions, for which it gets its namesake. Impulse is a vector quantity, meaning it has both a magnitude, which describes the amount by which the momentum changed, and a direction, which describes the direction in which the momentum changed. For a force acting over a short time, the impulse is often idealized so that the change in momentum produced by the force is modelled as happening instantaneously. This sort of change is a step change, and is not physically possible. However, this is a useful model for computing the effects of ideal collisions (such as in videogame physics engines). Additionally, in rocketry, the term "total impulse" is commonly used and is considered synonymous with the term "impulse". Impulse has the same units and dimensions as momentum. The SI unit of impulse is the newton-second ( ), and the dimensionally equivalent unit of momentum is the kilogram-metre per second ( ). The corresponding English engineering unit is the pound-second ( ), and in the British Gravitational System, the unit is the slug-foot per second ( ). \mathbf{J}=\mathbf{p}_\mathrm{f} - \mathbf{p}_\mathrm{i}. By Newton's second law of motion, the rate of change of momentum of an object is equal to the resultant force acting on the object: \mathbf{F}=\frac{\mathbf{p}_\mathrm{f} - \mathbf{p}_\mathrm{i}}{\Delta t}, so the impulse delivered by a constant force acting for time is: \mathbf{J}=\mathbf{F} \Delta t. \mathbf{J}= \int_{t_1}^{t_2}\mathbf{F} \, \mathrm{d}t. From Newton's second law, force is related to momentum by \mathbf{F} = \frac{\mathrm{d}\mathbf{p}}{\mathrm{d}t}. Therefore, \begin{align} \mathbf{J} &= \int_{t_1}^{t_2} \frac{\mathrm{d}\mathbf{p}}{\mathrm{d}t}\, \mathrm{d}t \\ &= \int_{\mathbf{p}_1}^{\mathbf{p}_2} \mathrm{d}\mathbf{p} \\ &= \mathbf{p}_2 - \mathbf{p}_1 = \Delta \mathbf{p}, \end{align} where is the change in linear momentum from time to . This is often called the impulse–momentum theorem (analogous to the work–energy theorem). \mathbf{J} = \int_{t_1}^{t_2} \mathbf{F}\, \mathrm{d}t = \Delta\mathbf{p} = m \mathbf{v_2} - m \mathbf{v_1}, where is the resultant force applied, and are times when the impulse begins and ends, respectively, is the mass of the object, is the final velocity of the object at the end of the time interval, and is the initial velocity of the object when the time interval begins. \mathbf F = \frac{\mathrm d \mathbf p}{\mathrm d t}. But this is the case only when there is no mass transfer into or out of . When the mass of an object changes by exuding or accumulating mass, the momentum has a time dependence in its mass aspect as well as in its velocity aspect. If Newton's second law is applied naively, the erroneous conclusion is \mathbf{F} = m \frac{\mathrm{d} \mathbf{v}} {\mathrm{d}t} + \mathbf{v}\frac{\mathrm{d} m} {\mathrm{d}t} \ \ \mathrm{(incorrect)}. Rather, suppose that the occurrence of the mass leaving or entering happens after every period , at which point a mass is exuded from the original mass and proceeds to travel with velocity . By Newton's third law, the impulse (i.e., the momentum transfer) between the two constant masses is equal and opposite, \mathbf J_m = - \mathbf J_{\Delta m}. Thus, the impulse on by is \mathbf J_m = \Delta m (\mathbf v - \mathbf u). Suppose an external force is applied to the first object. Then, in a unit of time , it gains an impulse and then loses a mass , yielding the net impulse, \mathbf J = \mathbf J_\mathrm{ext} + \mathbf J_m = \mathbf F_\mathrm{ext}\Delta t + \Delta m (\mathbf v - \mathbf u). Hence, what we find is that in the infinitesimal limit, that, \mathbf F_\mathrm{ext} = m \mathbf a - \frac{\mathrm d m}{\mathrm d t} (\mathbf u - \mathbf v). Relating this back to Newton's second law, we have that the law applies only to the of the system. Using this and labeling mass that has left the system with , \begin{align} \mathbf{F}_\mathrm{ext} &= \frac{\mathrm d \mathbf P}{\mathrm d t} \\ &= \frac{\mathrm d \mathbf p}{\mathrm d t} + \frac{\mathrm d \mathbf p_\mathrm{ex}}{\mathrm d t} \\ &= m \mathbf a + \mathbf{v}\frac{\mathrm{d} m} {\mathrm{d}t} + \mathbf{v}_\mathrm{ex}\frac{\mathrm{d} m_\mathrm{ex}} {\mathrm{d}t} \\ &= m \mathbf a - \frac{\mathrm d m}{\mathrm d t} (\mathbf u - \mathbf v), \end{align} yielding the same result. Thus, using either the step-wise impulse method or the infinitesimal Newtonian force method work in this case. I_\mathrm{sp}=\mathbf v - \mathbf u. In this case, we call this quantity the exhaust velocity since it is equal to the velocity at which the material is leaving the rocket relative to the frame of the rocket. The thrust is then \mathbf T = -\frac{\mathrm d m}{\mathrm d t} I_\mathrm{sp} = \frac{\mathrm d m}{\mathrm d t} (\mathbf v - \mathbf u).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1364586628 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.