Indoor rower
indoor rowers An indoor rower, or rowing machine, is a machine used to simulate the action of watercraft rowing for the purpose of exercise or training for rowing.
≈ 4 min read
Indoor rower. encyclopegia.org, snapshot enwiki-001373135804. /a/indoor-rower
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
indoor rowers An indoor rower, or rowing machine, is a machine used to simulate the action of watercraft rowing for the purpose of exercise or training for rowing. Modern indoor rowers are known as ergometers (colloquially erg or ergo) because they measure work performed by the rower (that can be measured in ergs).
Indoor rowing has become established as a sport, drawing a competitive environment from around the world. The term "indoor rower" also refers to a participant in this sport.
Damper type
Piston resistance comes from hydraulic cylinders that are attached to the handles of the rowing machine. Braked flywheel resistance models comprise magnetic, air, and water resistance rowers. Magnetic resistance models control resistance by means of permanent magnets or electromagnets.
Air resistance models use vanes on the flywheel to provide the flywheel braking needed to generate resistance. Water resistance models consist of a paddle revolving in an enclosed tank of water. Dual Resistance Rower is a professional fitness equipment with fan and magnetic brake resistance for a variety of intensity levels from warm-ups to HIIT intervals.
Slides
Sometimes, slides are placed underneath the machine, which allows it to move back and forth smoothly as if there were water beneath the rower. The slides can be connected in rows or columns so that rowers are forced to move together on the ergometer, similarly to the way they would match up their rhythm in a boat. Indoor rowers usually also display estimates of rowing boat speed and energy used by the athlete.
Catch
Knees are bent with the shins in a vertical position. The back should be roughly parallel to the thigh without hyperflexion (leaning forward too far). The arms and shoulders should be extended forward and relaxed. The arms should also be level.
Drive
The drive is initiated by a push and extension of the legs; the body remains in the catch posture at this point of the drive. As the legs continue to full extension, the hip angle opens and the rower engages the core to begin the motion of the body levering backward, adding to the work of the legs.
When the legs are fully extended, the rower begins to pull the handle toward the chest with their arms, completing the stroke with the handle halfway up the body and the forearms parallel to the ground.
Finish (or release)
The legs are at full extension and flat. The shoulders are slightly behind the pelvis, and the arms are in full contraction with the elbows bent and hands against the chest below the nipples. The back of the rower is still maintained in an upright posture and wrists should be flat.
Recovery
The recovery is a slow slide back to the initial part of the stroke, it gives the rower time to recover from the previous stroke. During the recovery, the actions are in reverse order of the drive. The recovery is initiated by the extensions of the arms until fully extended in front of the body.
The torso is then engaged by pivoting at the hips to move the torso in front of the hips. Weight transfers from the back of the seat to the front of the seat at this time. When the hands come over the knees, the legs are bent at the knees, moving the slide towards the front of the machine.
As the back becomes more parallel to the thighs, the recovery is completed when the shins are perpendicular to the ground. At this point the recovery transitions to the catch for the next stroke.
Sport
The first indoor rowing competition was held in Cambridge, Massachusetts, in February 1982 with participation of 96 on-water rowers who called themselves the "Charles River Association of Sculling Has-Beens", hence the acronym, "CRASH-B". The core events for indoor rowing competitions that are currently competed in at the World Rowing Indoor Championships are the individual 500m, individual 2000m, individual 1 hour, and 3-minute teams event.
Events at other indoor rowing competitions include the mile and the 2500-meter. Most competitions are organised into categories based on sex, age, and weight class.
See also
Rowbike Rowing Rowing tank Row (weight-lifting) List of world best times in rowing
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373135804 under CC BY-SA 4.0; modifications have been made.