Lesson plan

InflateSail

InflateSail was a 3U CubeSat launched on PSLV C38 on 23 June 2017 into a polar Sun-synchronous orbit. It carried a inflatable rigidizable mast, and a drag-deorbiting sail. Its primary aim was to demonstrate the effectiveness of drag-based deorbiting from low Earth orbit (LEO). Built by Surrey Space Centre of the University of Surrey, it was one of the Technology Demonstrator CubeSats for the QB50 mission. An identical drag sail payload was planned to be included on the RemoveDEBRIS demonstrator.

Back to article

Article summary

InflateSail was a 3U CubeSat launched on PSLV C38 on 23 June 2017 into a polar Sun-synchronous orbit. It carried a inflatable rigidizable mast, and a drag-deorbiting sail. Its primary aim was to demonstrate the effectiveness of drag-based deorbiting from low Earth orbit (LEO). Built by Surrey Space Centre of the University of Surrey, it was one of the Technology Demonstrator CubeSats for the QB50 mission. An identical drag sail payload was planned to be included on the RemoveDEBRIS demonstrator.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.