Intel BCD opcodes

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Intel BCD opcodes are a set of six x86 instructions that operate with binary-coded decimal numbers: AAA , DAA , AAS , DAS , AAM , and AAD . Most arithmetic operations on x86 processors use a binary numeral system, but these instructions allow basic arithmetic using a decimal numeral system. In addition, the x87 part supports a unique 18-digit (ten-byte) BCD format that can be loaded into and stored from the floating point registers, from where ordinary FP computations can be performed. The integer BCD instructions are no longer supported in long mode.

The Intel BCD opcodes are a set of six x86 instructions that operate with binary-coded decimal numbers: AAA , DAA , AAS , DAS , AAM , and AAD . Most arithmetic operations on x86 processors use a binary numeral system, but these instructions allow basic arithmetic using a decimal numeral system. In addition, the x87 part supports a unique 18-digit (ten-byte) BCD format that can be loaded into and stored from the floating point registers, from where ordinary FP computations can be performed. The integer BCD instructions are no longer supported in long mode.

See also

x86 Bit manipulation instruction set

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351191508 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.