Intel MCS-51

The Intel MCS-51 (commonly termed 8051) is a single-chip microcontroller (MCU) series developed by Intel in 1980 for use in embedded systems.

Uses your system voice; voice and rate in settings.

≈ 5 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Intel MCS-51 (commonly termed 8051) is a single-chip microcontroller (MCU) series developed by Intel in 1980 for use in embedded systems. Intel's original versions were popular in the 1980s and early 1990s, and enhanced binary compatible derivatives remain popular today. It is a complex instruction set computer with separate memory spaces for program instructions and data.

Intel's original MCS-51 family was developed using N-type metal–oxide–semiconductor (NMOS) technology, like its predecessor Intel MCS-48, but later versions, identified by a letter C in their name (e.g., 80C51) use complementary metal–oxide–semiconductor (CMOS) technology and consume less power than their NMOS predecessors. This made them more suitable for battery-powered devices.

The family was continued in 1996 with the enhanced 8-bit MCS-151 and the 8/16/32-bit MCS-251 family of binary compatible microcontrollers. While Intel no longer manufactures the MCS-51, MCS-151 and MCS-251 family, enhanced binary compatible derivatives made by numerous vendors remain popular today.

Some derivatives integrate a digital signal processor (DSP) or a floating-point unit (coprocessor, FPU). Beyond these physical devices, several companies also offer MCS-51 derivatives as IP cores for use in field-programmable gate array (FPGA) or application-specific integrated circuit (ASIC) designs.

File:Intel_D87C51_AMD.jpg|AMD D87C51 File:MBL8031AH.jpg|Fujitsu MBL8031AH File:Ic-photo-MHS--S-80C31--(8031-MCU).png|MHS S-80C31 File:Ic-photo-OKI--M80C31F--(8031-MCU).JPG|OKI M80C31 File:Ic-photo-Philips--80C31BH-3 16P--(8031-MCU).png|Philips PCB80C31 File:Ic-photo-Signetics--SCN8031H--(8031-MCU).JPG|Signetics SCN8031 File:Ic-photo-Temic--TS80C32X2-MCB-(8032-MCU).png|Temic TS80C32X2 File:Atmel 89c2051 gfdl.jpg|Atmel AT89C2051 File:SAB-C515-LN.jpg|Infineon SAB-C515 File:EPROM-Microcontroller Philips 87C654.jpg|Philips S87C654 File:Ic-photo-Siemens--SAB-C501G-1RP-(MCU).png|Siemens SAB-C501 File:STC89C52.jpg|STC Micro STC89C52 Other ICs or IPs compatible with the MCS-51 have been developed by Analog Devices, Integral Minsk, Kristall Kyiv, and NIIET Voronezh.

Enhanced 8-bit binary compatible microcontroller: MCS-151 family

In 1996 Intel announced the MCS-151 family, an up to 6 times faster variant, that's fully binary and instruction set compatible with 8051. Unlike their 8051, MCS-151 is a pipelined CPU, with 16-bit internal code bus and is 6x the speed. The MCS-151 family was also discontinued by Intel, but is widely available in binary compatible and partly enhanced variants.

8/16/32-bit binary compatible microcontroller: MCS-251 family

The 80251 8/16/32-bit microcontroller with 16 MB (24-bit) address-space and six times faster instruction cycle was introduced by Intel in 1996. It can perform as an 8-bit 8051, has 24-bit linear addressing, an 8-bit ALU, 8-bit instructions, 16-bit instructions, a limited set of 32-bit instructions, 16 8-bit registers, 16 16-bit registers (8 of which overlap with pairs of 8-bit registers), and 10 32-bit registers (8 of which overlap with pairs of 16-bit registers).

It features extended instructions and later variants with higher performance. It is also available as intellectual property (IP). It is 3-stage pipelined.

The MCS-251 family was also discontinued by Intel, but is widely available in binary compatible and partly enhanced variants from many manufacturers. The 80251 new instructions are assigned opcodes in the range x8–xF, and are selected using the formerly unused opcode A5 as an opcode prefix in one of two ways: In "binary mode," operation is fully 8051 compatible, and all new instructions must be prefixed with A5.

In "source mode," existing 8051 code must have an A5 prefix byte added to all 8051 instructions in the range x6–xF. (This is usually done by the assembler.) Unprefixed opcode bytes in this range encode the new 80251 instructions.

(Opcode bytes x6–x7 are not assigned, but are available for future expansion.) Generally , the new 80251 instructions are two bytes long (not including the A5 prefix), with the first byte specifying the operation, and the second encoding two 4-bit register operands, or one register operand and four additional opcode bits. Open source VHDL 8051 implementation (Oregano Systems)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370696939 under CC BY-SA 4.0; modifications have been made.

Words in each section8/16/32-bit binary comp…8/16/32-bit binary compatible microcontroller: MCS-251 family8/16/32-bit binary compatible microcontroller: MCS-251 family: 289 words289Enhanced 8-bit binary c…Enhanced 8-bit binary compatible microcontroller: MCS-151 familyEnhanced 8-bit binary compatible microcontroller: MCS-151 family: 62 words62
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001370696939 · captured 2026-08-22 · ledger · version history

Cite this page as: encyclopegia.org, “Intel MCS-51”, snapshot enwiki-001370696939. https://encyclopegia.org/a/intel-mcs-51

Sources cited in this revision

26 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.