Inter-processor interrupt

In computing, an inter-processor interrupt (IPI), also known as a shoulder tap, is a special type of interrupt by which one processor may interrupt another processor in a multiprocessor system if the interrupting processor requires action…

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In computing, an inter-processor interrupt (IPI), also known as a shoulder tap, is a special type of interrupt by which one processor may interrupt another processor in a multiprocessor system if the interrupting processor requires action from the other processor. Actions that might be requested include:

  • Flush memory management unit caches, such as translation lookaside buffers, on other processors when memory mappings are changed by one processor;
  • Stop when the system is being shut down by one processor.
  • Notify an alternate CPU of a malfunction for Alternate CPU Recovery (ACR).
  • Notify a processor that higher-priority work is available.
  • Notify a processor of work that cannot be done on all processors due to, e.g.,
  • 3 See also
  • 4 References
  • 5 External links
  • Mechanism

    edit edit source

    The M65MP option of OS/360 used the Direct Control feature of the S/360 to generate an interrupt on another processor; on S/370 and its successors, including z/Architecture, the SIGNAL PROCESSOR instruction provides a more formalized interface. The documentation for some IBM operating systems refers to this as a shoulder tap.

    On IBM PC compatible computers that use the Advanced Programmable Interrupt Controller (APIC), IPI signaling is often performed using the APIC. When a CPU wishes to send an interrupt to another CPU, it stores the interrupt vector and the identifier of the target's local APIC in the Interrupt Command Register (ICR) of its own local APIC. A message is then sent via the APIC bus to the target's local APIC, which then issues a corresponding interrupt to its own CPU.

    Examples

    edit edit source

    Windows

    edit edit source

    In a multiprocessor system running Microsoft Windows, a processor may interrupt another processor for the following reasons, in addition to the ones listed above:[3]

    1. queue a DISPATCH_LEVEL interrupt to schedule a particular thread for execution;
    2. kernel debugger breakpoint.

    IPIs are given an IRQL of 29.[4]

    See also

    edit edit source

    References

    edit edit source
    1. ^ "Appendix F: Multiprocessing Extensions" (PDF). OS I/O Supervisor Logic - Release 21 - Program Number 360S-CI-505 (PDF). Program Logic. IBM. p. 271. GY28-6616-9. Retrieved August 28, 2022. Wikipedia revision 1347124042, retrieved 2026-11-21
    2. ^ "AMD Technical Information Portal". docs.amd.com. Retrieved 2024-07-18. Wikipedia revision 1347124042, retrieved 2026-11-21
    3. ^ "Inter Processor Interrupt usage". Stack Overflow. Retrieved 2024-07-18. Wikipedia revision 1347124042, retrieved 2026-11-21
    4. ^ Matt (2002-04-28). "Understanding IRQL". Archived from the original on 2019-10-14. Retrieved 2014-12-06. Wikipedia revision 1347124042, retrieved 2026-11-21
    edit edit source

    Text derived from https://en.wikipedia.org/w/index.php?oldid=1347124042 under CC BY-SA 4.0; modifications have been made.

    Words in each sectionMechanismMechanismMechanism: 137 words137ExamplesExamplesExamples: 59 words59See alsoSee alsoSee also: 9 words9
    Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

    Provenance

    snapshot enwiki-001347124042 · captured 2026-04-04 · ledger · version history

    Cite this page as: encyclopegia.org, “Inter-processor interrupt”, snapshot enwiki-001347124042. https://encyclopegia.org/a/inter-processor-interrupt