Isentropic process

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

An isentropic process is an idealized thermodynamic process that is both adiabatic and reversible. In thermodynamics, adiabatic processes are reversible. Clausius (1875) adopted "isentropic" as meaning the same as Rankine's word: "adiabatic". The work transfers of the system are frictionless, and there is no net transfer of heat or matter. Such an idealized process is useful in engineering as a model of and basis of comparison for real processes.

This process is idealized because reversible processes do not occur in reality; thinking of a process as both adiabatic and reversible would show that the initial and final entropies are the same, thus, the reason it is called isentropic (entropy does not change). Thermodynamic processes are named based on the effect they would have on the system (ex. isovolumetric/isochoric: constant volume, isenthalpic: constant enthalpy). Even though in reality it is not necessarily possible to carry out an isentropic process, some may be approximated as such.

The word "isentropic" derives from the process being one in which the entropy of the system remains unchanged, in addition to a process which is both adiabatic and reversible.

An isentropic process is an idealized thermodynamic process that is both adiabatic and reversible. In thermodynamics, adiabatic processes are reversible. Clausius (1875) adopted "isentropic" as meaning the same as Rankine's word: "adiabatic". The work transfers of the system are frictionless, and there is no net transfer of heat or matter. Such an idealized process is useful in engineering as a model of and basis of comparison for real processes.

This process is idealized because reversible processes do not occur in reality; thinking of a process as both adiabatic and reversible would show that the initial and final entropies are the same, thus, the reason it is called isentropic (entropy does not change). Thermodynamic processes are named based on the effect they would have on the system (ex. isovolumetric/isochoric: constant volume, isenthalpic: constant enthalpy). Even though in reality it is not necessarily possible to carry out an isentropic process, some may be approximated as such.

The word "isentropic" derives from the process being one in which the entropy of the system remains unchanged, in addition to a process which is both adiabatic and reversible. where \delta Q is the amount of energy the system gains by heating, T_\text{surr} is the temperature of the surroundings, and dS is the change in entropy. Equality is reached in a reversible process, which is an imagined idealized theoretical limit, never actually occurring in physical reality, with essentially equal temperatures of system and surroundings.

For an isentropic process, if also reversible, there is no transfer of energy as heat because the process is adiabatic; δQ = 0. In contrast, if the process is irreversible, entropy is produced within the system; consequently, in order to maintain constant entropy within the system, energy must be simultaneously removed from the system as heat. For reversible processes, an isentropic transformation is carried out by thermally "insulating" the system from its surroundings.

Temperature is the thermodynamic conjugate variable to entropy, thus the conjugate process would be an isothermal process, in which the system is thermally "connected" to a constant-temperature heat bath. The entropy of a given mass does not change during a process that is internally reversible and adiabatic. A process during which the entropy remains constant is called an isentropic process, written \Delta s=0 or s_1 = s_2 . Some examples of theoretically isentropic thermodynamic devices are pumps, gas compressors, turbines, nozzles, and diffusers.

Isentropic efficiencies of steady-flow devices in thermodynamic systems

Most steady-flow devices operate under adiabatic conditions, and the ideal process for these devices is the isentropic process. The parameter that describes how efficiently a device approximates a corresponding isentropic device is called isentropic or adiabatic efficiency. Isentropic efficiency of turbines: \eta_\text{t} = \frac{\text{actual turbine work}}{\text{isentropic turbine work}} = \frac{W_a}{W_s} \cong \frac{h_1 - h_{2a}}{h_1 - h_{2s}}.

Isentropic efficiency of compressors: \eta_\text{c} = \frac{\text{isentropic compressor work}}{\text{actual compressor work}} = \frac{W_s}{W_a} \cong \frac{h_{2s} - h_1}{h_{2a} - h_1}. Isentropic efficiency of nozzles: \eta_\text{n} = \frac{\text{actual KE at nozzle exit}}{\text{isentropic KE at nozzle exit}} = \frac{V_{2a}^2}{V_{2s}^2} \cong \frac{h_1 - h_{2a}}{h_1 - h_{2s}}.

For all the above equations: h_1 is the specific enthalpy at the entrance state, h_{2a} is the specific enthalpy at the exit state for the actual process, h_{2s} is the specific enthalpy at the exit state for the isentropic process.

Isentropic devices in thermodynamic cycles

Note: The isentropic assumptions are only applicable with ideal cycles. Real cycles have inherent losses due to compressor and turbine inefficiencies and the second law of thermodynamics. Real systems are not truly isentropic, but isentropic behavior is an adequate approximation for many calculation purposes. dU = \delta W + \delta Q. The reversible work done on a system by changing the volume is \delta W = -p \,dV, where p is the pressure, and V is the volume. The change in enthalpy ( H = U + pV ) is given by dH = dU + p \,dV + V \,dp.

Then for a process that is both reversible and adiabatic (i.e. no heat transfer occurs), \delta Q_\text{rev} = 0 , and so dS = \delta Q_\text{rev}/T = 0 All reversible adiabatic processes are isentropic. This leads to two important observations: dU = \delta W + \delta Q = -p \,dV + 0, dH = \delta W + \delta Q + p \,dV + V \,dp = -p \,dV + 0 + p \,dV + V \,dp = V \,dp. Next, a great deal can be computed for isentropic processes of an ideal gas. For any transformation of an ideal gas, it is always true that dU = n C_v \,dT , and dH = n C_p \,dT.

Using the general results derived above for dU and dH , then dU = n C_v \,dT = -p \,dV, dH = n C_p \,dT = V \,dp. So for an ideal gas, the heat capacity ratio can be written as \gamma = \frac{C_p}{C_V} = -\frac{dp/p}{dV/V}. For a calorically perfect gas \gamma is constant. Hence on integrating the above equation, assuming a calorically perfect gas, we get pV^\gamma = \text{constant}, that is, \frac{p_2}{p_1} = \left(\frac{V_1}{V_2}\right)^\gamma. Using the equation of state for an ideal gas, p V = n R T , TV^{\gamma-1} = \text{constant}.

(Proof: PV^\gamma = \text{constant} \Rightarrow PV\,V^{\gamma-1} = \text{constant} \Rightarrow nRT\,V^{\gamma-1} = \text{constant}.

But nR = constant itself, so TV^{\gamma-1} = \text{constant} .) \frac{p^{\gamma-1}}{T^\gamma} = \text{constant} also, for constant C_p = C_v + R (per mole), \frac{V}{T} = \frac{nR}{p} and p = \frac{nRT}{V} S_2-S_1 = nC_p \ln\left(\frac{T_2}{T_1}\right) - nR\ln\left(\frac{p_2}{p_1}\right) \frac{S_2-S_1}{n} = C_p \ln\left(\frac{T_2}{T_1}\right) - R\ln\left(\frac{T_2 V_1}{T_1 V_2}\right ) = C_v\ln\left(\frac{T_2}{T_1}\right)+ R \ln\left(\frac{V_2}{V_1}\right) Thus for isentropic processes with an ideal gas, T_2 = T_1\left(\frac{V_1}{V_2}\right)^{(R/C_v)} or V_2 = V_1\left(\frac{T_1}{T_2}\right)^{(C_v/R)} PV^{\gamma} = \text{constant}, PV = m R_s T, P = \rho R_s T, where: P = pressure, V = volume, \gamma = ratio of specific heats = C_p/C_v , T = temperature, m = mass, R_s = gas constant for the specific gas = R/M , R = universal gas constant, M = molecular weight of the specific gas, \rho = density, C_p = molar specific heat at constant pressure, C_v = molar specific heat at constant volume.

Notes

References

Van Wylen, G. J. and Sonntag, R. E. (1965), Fundamentals of Classical Thermodynamics, John Wiley & Sons, Inc., New York. Library of Congress Catalog Card Number: 65-19470

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376859904 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.