Lesson plan
Isolated power
In baseball, isolated power or ISO is a sabermetric computation used to measure a batter's raw power. One formula is slugging percentage minus batting average. ISO = SLG - AVG = \frac{\mathit{TB} - H}{AB} = \frac{(\mathit{1B}) + (2 \times \mathit{2B}) + (3 \times \mathit{3B}) + (4 \times \mathit{HR})}{AB} - \frac{H}{AB} = \frac{(\mathit{1B}) + (2 \times \mathit{2B}) + (3 \times \mathit{3B}) + (4 \times \mathit{HR}) - (\mathit{1B} + \mathit{2B} + \mathit{3B} + \mathit{HR})}{AB} = \frac{(\mathit{2B}) + (2 \times \mathit{3B}) + (3 \times \mathit{HR})}{AB} The final result measures how many extra bases a player averages per at bat. A player who hits only singles would thus have an ISO of 0. The maximum ISO is 3.000, and can only be attained by hitting a home run in every at-bat. The term "isolated power" was coined by Bill James, but the concept dates back to Branch Rickey and his statistician Allan Roth.
Article summary
In baseball, isolated power or ISO is a sabermetric computation used to measure a batter's raw power. One formula is slugging percentage minus batting average. ISO = SLG - AVG = \frac{\mathit{TB} - H}{AB} = \frac{(\mathit{1B}) + (2 \times \mathit{2B}) + (3 \times \mathit{3B}) + (4 \times \mathit{HR})}{AB} - \frac{H}{AB} = \frac{(\mathit{1B}) + (2 \times \mathit{2B}) + (3 \times \mathit{3B}) + (4 \times \mathit{HR}) - (\mathit{1B} + \mathit{2B} + \mathit{3B} + \mathit{HR})}{AB} = \frac{(\mathit{2B}) + (2 \times \mathit{3B}) + (3 \times \mathit{HR})}{AB} The final result measures how many extra bases a player averages per at bat. A player who hits only singles would thus have an ISO of 0. The maximum ISO is 3.000, and can only be attained by hitting a home run in every at-bat. The term "isolated power" was coined by Bill James, but the concept dates back to Branch Rickey and his statistician Allan Roth.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.