Isotope analysis
≈ 11 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Isotope analysis is the identification of isotopic signature, abundance of certain stable isotopes of chemical elements within organic and inorganic compounds. Isotopic analysis can be used to understand the flow of energy through a food web, to reconstruct past environmental and climatic conditions, to investigate human and animal diets, for food authentification, and a variety of other physical, geological, palaeontological and chemical processes. Stable isotope ratios are measured using mass spectrometry, which separates the different isotopes of an element on the basis of their mass-to-charge ratio.
Isotope analysis is the identification of isotopic signature, abundance of certain stable isotopes of chemical elements within organic and inorganic compounds. Isotopic analysis can be used to understand the flow of energy through a food web, to reconstruct past environmental and climatic conditions, to investigate human and animal diets, for food authentification, and a variety of other physical, geological, palaeontological and chemical processes. Stable isotope ratios are measured using mass spectrometry, which separates the different isotopes of an element on the basis of their mass-to-charge ratio.
Tissues affected
Isotopic oxygen is incorporated into the body primarily through ingestion at which point it is used in the formation of, for archaeological purposes, bones and teeth. The oxygen is incorporated into the hydroxylcarbonic apatite of bone and tooth enamel. Bone is continually remodelled throughout the lifetime of an individual. Although the rate of turnover of isotopic oxygen in hydroxyapatite is not fully known, it is assumed to be similar to that of collagen; approximately 10 years.
Consequently, should an individual remain in a region for 10 years or longer, the isotopic oxygen ratios in the bone hydroxyapatite would reflect the isotopic oxygen ratios present in that region. Teeth are not subject to continual remodelling and so their isotopic oxygen ratios remain constant from the time of formation. The isotopic oxygen ratios, then, of teeth represent the ratios of the region in which the individual was born and raised. Where deciduous teeth are present, it is also possible to determine the age at which a child was weaned.
Breast milk production draws upon the body water of the mother, which has higher levels of 18 O due to the preferential loss of 16 O through sweat, urine, and expired water vapour. While teeth are more resistant to chemical and physical changes over time, both are subject to post-depositional diagenesis. As such, isotopic analysis makes use of the more resistant phosphate groups, rather than the less abundant hydroxyl group or the more likely diagenetic carbonate groups present.
Stable isotope analysis in aquatic ecosystems
Stable isotopes have become a popular method for understanding aquatic ecosystems because they can help scientists in understanding source links and process information in marine food webs. These analyses can also be used to a certain degree in terrestrial systems. Certain isotopes can signify distinct primary producers forming the bases of food webs and trophic level positioning. The stable isotope compositions are expressed in terms of delta values (δ) in permil (‰), i.e. parts per thousand differences from a standard.
They express the proportion of an isotope that is in a sample. The values are expressed as: δX = [(R sample / R standard ) – 1] × 10 3 where X represents the isotope of interest (e.g., 13 C) and R represents the ratio of the isotope of interest and its natural form (e.g., 13 C/ 12 C). Higher (or less negative) delta values indicate increases in a sample's isotope of interest, relative to the standard, and lower (or more negative) values indicate decreases.
The standard reference materials for carbon, nitrogen, and sulfur are Pee Dee Belemnite limestone, nitrogen gas in the atmosphere, and Cañon Diablo meteorite respectively. Analysis is usually done using a mass spectrometer, detecting small differences between gaseous elements. Analysis of a sample can cost anywhere from $30 to $100. Stable isotopes assist scientists in analyzing animal diets and food webs by examining the animal tissues that bear a fixed isotopic enrichment or depletion vs. the diet.
Muscle or protein fractions have become the most common animal tissue used to examine the isotopes because they represent the assimilated nutrients in their diet. The main advantage to using stable isotope analysis as opposed to stomach content observations is that no matter what the status is of the animal's stomach (empty or not), the isotope tracers in the tissues will give us an understanding of its trophic position and food source. The three major isotopes used in aquatic ecosystem food web analysis are 13 C, 15 N and 34 S.
While all three indicate information on trophic dynamics, it is common to perform analysis on at least two of the previously mentioned three isotopes for better understanding of marine trophic interactions and for stronger results.
Hydrogen-2
The ratio of 2 H, also known as deuterium, to 1 H has been studied in both plant and animal tissue. Hydrogen isotopes in plant tissue are correlated with local water values but vary based on fractionation during photosynthesis, transpiration, and other processes in the formation of cellulose. A study on the isotope ratios of tissues from plants growing within a small area in Texas found tissues from CAM plants were enriched in deuterium relative to C4 plants. Hydrogen isotope ratios in animal tissue reflect diet, including drinking water, and have been used to study bird migration and aquatic food webs.
Carbon-13
Carbon isotopes aid us in determining the primary production source responsible for the energy flow in an ecosystem.
The transfer of 13 C through trophic levels remains relatively the same, except for a small increase (an enrichment 13 C between animals indicate that they have different food sources or that their food webs are based on different primary producers (i.e. different species of phytoplankton, marsh grasses.) Because δ 13 C indicates the original source of primary producers, the isotopes can also help us determine shifts in diets, both short term, long term or permanent. These shifts may even correlate to seasonal changes, reflecting phytoplankton abundance.
Scientists have found that there can be wide ranges of δ 13 C values in phytoplankton populations over a geographic region. While it is not quite certain as to why this may be, there are several hypotheses for this occurrence.
These include isotopes within dissolved inorganic carbon pools (DIC) may vary with temperature and location and that growth rates of phytoplankton may affect their uptake of the isotopes. δ 13 C has been used in determining migration of juvenile animals from sheltered inshore areas to offshore locations by examining the changes in their diets. A study by Fry (1983) studied the isotopic compositions in juvenile shrimp of south Texas grass flats.
Fry found that at the beginning of the study the shrimp had isotopic values of δ 13 C = -11 to -14‰ and 6-8‰ for δ 15 N and δ 34 S. As the shrimp matured and migrated offshore, the isotopic values changed to those resembling offshore organisms (δ 13 C= -15‰ and δ 15 N = 11.5‰ and δ 34 S = 16‰).
Sulfur-34
While there is no enrichment of 34 S between trophic levels, the stable isotope can be useful in distinguishing benthic vs. pelagic producers and marsh vs. phytoplankton producers. Similar to 13 C, it can also help distinguish between different phytoplankton as the key primary producers in food webs. The differences between seawater sulfates and sulfides (c. 21‰ vs -10‰) aid scientists in the discriminations. Sulfur tends to be more plentiful in less aerobic areas, such as benthic systems and marsh plants, than the pelagic and more aerobic systems. Thus, in the benthic systems, there are smaller δ 34 S values.
Nitrogen-15
Nitrogen isotopes indicate the trophic level position of organisms (reflective of the time the tissue samples were taken). There is a larger enrichment component with δ 15 N because its retention is higher than that of 14 N. This can be seen by analyzing the waste of organisms. Cattle urine has shown that there is a depletion of 15 N relative to the diet. As organisms eat each other, the 15 N isotopes are transferred to the predators.
Thus, organisms higher in the trophic pyramid have accumulated higher levels of 15 N ( and higher δ 15 N values) relative to their prey and others before them in the food web. Numerous studies on marine ecosystems have shown that on average there is a 3.2‰ enrichment of 15 N vs. diet between different trophic level species in ecosystems. In the Baltic sea, Hansson et al.
(1997) found that when analyzing a variety of creatures (such as particulate organic matter (phytoplankton), zooplankton, mysids, sprat, smelt and herring,) there was an apparent fractionation of 2.4‰ between consumers and their apparent prey. In addition to trophic positioning of organisms, δ 15 N values have become commonly used in distinguishing between land derived and natural sources of nutrients. As water travels from septic tanks to aquifers, the nitrogen rich water is delivered into coastal areas.
Waste-water nitrate has higher concentrations of 15 N than the nitrate that is found in natural soils in near shore zones. For bacteria, it is more convenient for them to uptake 14 N as opposed to 15 N because it is a lighter element and easier to metabolize. Thus, due to bacteria's preference when performing biogeochemical processes such as denitrification and volatilization of ammonia, 14 N is removed from the water at a faster rate than 15 N, resulting in more 15 N entering the aquifer.
15 N is roughly 10-20‰ as opposed to the natural 15 N values of 2-8‰. The inorganic nitrogen that is emitted from septic tanks and other human-derived sewage is usually in the form of NH4+ . Once the nitrogen enters the estuaries via groundwater, it is thought that because there is more 15 N entering, that there will also be more 15 N in the inorganic nitrogen pool delivered and that it is picked up more by producers taking up N.
Even though 14 N is easier to take up, because there is much more 15 N, there will still be higher amounts assimilated than normal. These levels of δ 15 N can be examined in creatures that live in the area and are non migratory (such as macrophytes, clams and even some fish). This method of identifying high levels of nitrogen input is becoming a more and more popular method in attempting to monitor nutrient input into estuaries and coastal ecosystems.
Environmental managers have become more and more concerned about measuring anthropogenic nutrient inputs into estuaries because excess in nutrients can lead to eutrophication and hypoxic events, eliminating organisms from an area entirely.
Oxygen-18
Analysis of the ratio of 18 O to 16 O in the shells of the Colorado Delta clam was used to assess the historical extent of the estuary in the Colorado River Delta prior to construction of upstream dams.
Wildlife forensics
Stable isotope analysis of Carbon-14 in elephant tusks has been identified by researchers at the University of Utah, including Thure E. Cerling, as an approach to help identify elephant poaching activity, based on when the animal died. MixSIAR. MixSIAR is an R package that helps you create and run Bayesian mixing models to analyze biotracer data (i.e. stable isotopes, fatty acids), following the MixSIAR model framework. Both graphical user interface (GUI) and script versions are available.
Stock, B.C., Jackson, A.L., Ward, E.J., Parnell, A.C., Phillips, D.L., Semmens, B.X. Associated peer-reviewed research paper. . Stable isotope mixing model for an excess number of sources (Visual Basic), (Phillips and Gregg, 2003). SIAR - Stable isotope analysis in R.. Bayesian mixing model package for the R environment. Parnell, A., Inger, R., Bearhop, S., Jackson, A. SISUS: Stable Isotope Sourcing using Sampling.
Stable Isotope Sourcing using Sampling (SISUS) (Erhardt, Wolf, and Bedrick, In Prep.) provides a more efficient algorithm to provide solutions to the same problem as the Phillips and Gregg (2003) IsoSource model and software for source partitioning using stable isotopes.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375490063 under CC BY-SA 4.0; modifications have been made.