Isuzu Aska
The Isuzu Aska was a nameplate used by Isuzu of Japan to denote its mid-size sedans from 1983 to 2002.
≈ 7 min read
Isuzu Aska. encyclopegia.org, snapshot enwiki-001373882981. /a/isuzu-aska
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Isuzu Aska was a nameplate used by Isuzu of Japan to denote its mid-size sedans from 1983 to 2002. Originally the Aska was a version of General Motors' J-car produced by Isuzu, but after Isuzu pulled out of manufacturing passenger cars the nameplate was applied to rebadged versions of the Subaru Legacy (1990 to 1993) and Honda Accord (1994 to 2002) sold through Isuzu's Japanese distribution network.
The Aska replaced the Isuzu Florian in Isuzu's lineup and was discontinued in 2002 without a replacement. The name comes from the Japanese word, "Asuka", which is the old name of the Asuka Village in the Nara Prefecture of Japan. Because the name "Asuka" is likely to be mispronounced in foreign countries, the "u" was taken away from the name, presenting the model as the "Aska".
First generation (1983–1989)
The original Aska was developed as a part of GM's J-car program and was a replacement for Isuzu's dated Florian. In contrast to fellow J-cars from other GM divisions, the Aska only came in one body style, a four-door sedan (the station wagon body style on the Florian was always relatively unpopular).
The Isuzu J-car variant differed most notably in the rear styling from other J-car variants. From 1983 to 1984, the Aska was known as the "Florian Aska", before being renamed simply "Aska" in 1985. The car was launched in March 1983 with carburetted 1.8 and 2.0 litre gasoline engines and a diesel, going on sale a month later.
In August 1983 the Turbodiesel followed, with . In October 1983, a turbocharged and fuel injected version of the 2.0 litre engine, which developed 150 PS, joined the lineup as the LJ Turbo.
In November 1985 a version branded by the German tuner Irmscher (specializing in Opels, they cooperated with Isuzu on some other models as well), this version featured a distinctive body kit and became somewhat of a cult object among some car fans in Japan. In September 1984 the innovative (but ultimately unsuccessful) semi-automatic NAVi5 system became available for the naturally-aspirated Aska 2.0.
This was an automated manual transmission with an electronically operated clutch, long before Alfa Romeo's Selespeed. In March 1985 the diesel also became available with the NAVi5 transmission, and from September 1986 the LG Turbodiesel was also available with it.
The Aska underwent a very subtle facelift in July 1985, which was also when the "Florian" portion of the car's name was dropped. The first generation Aska was discontinued in March 1989; production totaled 108,512 cars. Isuzu did not have a contender in this segment for about a year's time until the second generation Aska was presented.
File:Isuzu Aska Irmscher Turbo.jpg|Isuzu Aska Irmscher Turbo (JJ120) File:1983 Isuzu Florian Aska 2000 Turbo LS rear.jpg|Rear View File:Chevrolet Aska Limited 1987 (33463087574).jpg|1985 Chevrolet Aska 1.8 Limited (Chile)
South America (Chile, Ecuador)
From 1984, the Aska was assembled in Arica, Chile from CKD kits and sold as Chevrolet Aska in the Chilean domestic market and in Ecuador. Chilean Askas came in three equipment levels (LT, Limited, and Deluxe), with two engines and either automatic or five-speed manual transmissions. While the two lesser versions both received a 1.8-litre coupled to the five-speed, the Deluxe got the larger 2-litre with , only fitted with the automatic transmission.
South-East Asia and New Zealand
The Aska was exported to Southeast Asia, where it was known as the Isuzu JJ. It was also exported to New Zealand as the Holden Camira (JJ) between 1984 and 1987. This replaced the Australian-sourced JD Camira, because its predecessor, the JB Camira, had fared badly in the New Zealand market.
However, the JD series wagon was retained, albeit imported concurrently from Australia rather than locally assembled. General Motors New Zealand switched back to the updated Australian version (JE) in 1987 due to the strengthening of Japanese Yen. In Indonesia, the two-liter version with was briefly sold as the "Holden Aska" alongside the 1.6-liter Camira.
Second generation (1990–1993)
With the exception of the American market, the J platform did not continue into the 1990s. Not having the resources to develop a mid-size car on their own, Isuzu forged a short-lived alliance with Subaru.
This provided for Isuzu to supply Subaru with Isuzu Bighorns (rebadged as the Subaru Bighorn), while Isuzu rebadged Subaru's mid-size Legacy sedan as the Isuzu Aska, beginning in June 1990. Both rebadged models were sold only in the Japanese market. There was also a Subaru Leone Van version briefly available, badged as the Isuzu Geminett II.
The EJ series engine was offered in both 1.8 and 2.0 liter displacements. The engine has either single or double overhead camshaft architecture and pent-roof, cross flow cylinder firing chambers.
The 2.0 liter fuel delivery was managed with sequential multiport fuel injection, and the 1.8 liter engine used a modified fuel delivery system with single point throttle body fuel injection called SPFI. The DOHC 2.0 liter non turbocharged engine had a dual stage intake manifold. The 2.0 liter vehicle came optional with Subaru's AWD system while the 1.8 came with FWD only.
As with all other Askas, this was only ever available with four-door saloon bodywork. The Aska was discontinued in May 1993, as the Subaru deal came to an end. Isuzu Aska BCL 2.0.jpg|Isuzu Aska 2.0 CX (BCL; pre-facelift) Isuzu Aska BCL 2.0 rear.jpg|Pre-facelift; rear Isuzu aska bcl 2.0cxtypeg 1 r.jpg|Isuzu Aska 2.0 CX type-G (facelift; rear)
Third generation (1994–1997)
Later, Isuzu entered a more substantial model-exchange alliance with Honda. Among other models, it encompassed the rebadging of the Honda Accord sedan as the Isuzu Aska. This model was presented in March 1994, after stock of the Legacy-based, previous generation Aska had been sold out.
The only difference to the Accord was the grille and logos. It was only offered with a two-liter four-cylinder engine, combined with a four-speed automatic transmission. The model code assigned to it by Isuzu was CJ1.
Production came to an end in September 1997, with sales from stock continuing for another two months. 3rd generation Isuzu Aska.jpg|Isuzu Aska (3rd Gen), front 3rd generation Isuzu Aska rear.jpg|Isuzu Aska (3rd Gen), rear Isuzu ASKA LF (CJ2) rear.JPG|Isuzu Aska, 4th Gen. (pre-facelift) (CJ2), rear Isuzu_aska_cj3_lj_1_f.jpg|Isuzu Aska, 4th Gen. (facelift) (CJ3), front Isuzu aska cj3 lj 1 r.jpg|Isuzu Aska, 4th Gen. (facelift) (CJ3), rear
External links
Photos of the Irmscher Aska Isuzu Aska Owners' Club "J2" (1st-gen Askas)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373882981 under CC BY-SA 4.0; modifications have been made.