Lesson plan
IT Grade
Note: in this context, IT does not mean Information Technology, but it is an Engineering term. An IT grade is an internationally accepted code system for tolerances on linear dimensions. Such code systems may be used to produce interchangeable parts. In engineering, the word tolerance refers to a range of allowable dimensions or values. Standard tolerance grades are a group of tolerances for linear sizes characterized by a common identifier. For SI measurements, a system of tolerance grades defined in ISO 286 is frequently used and identified by the letters IT followed by a number specifying how precise the requirements are, relative to the nominal size of a part. For example, IT14 refers to a group of tolerances used in manufacturing. For a part dimensioned at 10 mm, IT14 allows for up to 0.36 mm of variation in size. As the IT grade number increases, the tolerances increase; similarly, for larger nominal sizes, the standard tolerances increase. For a part dimensioned at 100 mm, IT14 allows for up to 0.87 mm of variation in size.
Article summary
Note: in this context, IT does not mean Information Technology, but it is an Engineering term. An IT grade is an internationally accepted code system for tolerances on linear dimensions. Such code systems may be used to produce interchangeable parts. In engineering, the word tolerance refers to a range of allowable dimensions or values. Standard tolerance grades are a group of tolerances for linear sizes characterized by a common identifier. For SI measurements, a system of tolerance grades defined in ISO 286 is frequently used and identified by the letters IT followed by a number specifying how precise the requirements are, relative to the nominal size of a part. For example, IT14 refers to a group of tolerances used in manufacturing. For a part dimensioned at 10 mm, IT14 allows for up to 0.36 mm of variation in size. As the IT grade number increases, the tolerances increase; similarly, for larger nominal sizes, the standard tolerances increase. For a part dimensioned at 100 mm, IT14 allows for up to 0.87 mm of variation in size.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.