Jeep Treo

The Jeep Treo was an electric concept car produced by Chrysler under their Jeep brand in the early twenty first century.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Jeep Treo was an electric concept car produced by Chrysler under their Jeep brand in the early twenty first century. Launched at the 2003 Tokyo Motor Show, it was envisaged for production in 2008, but the single prototype remained a one-off.

Designed for the Asian young urban driver, the car was fitted with three seats and had the provision to carry mountain bikes as an integral part of the near-teardrop shaped design. Although the prototype was designed to be powered by a hydrogen fuel cell, in its production form the car was to be given hybrid petrol-electric drive.

Design

Designed by the Chrysler Advanced Product Design Center in California by a team led by designer Freeman Thomas, the Jeep Treo was envisaged as "the ultimate student car" to attract young urban drivers. The car was designed to appeal to a younger audience than others in the Jeep range, it being expected that they would then move onto the more traditional models as they aged.

It had a wheelbase of and the body was long, wide and high. It weighed . Power was provided by two electric motors, one mounted on each axle, to give four-wheel drive, driven by a hydrogen fuel cell mounted under the floor, to offer a zero-emissions vehicle.

The design was inspired by anime concepts. The exterior was in the shape of a near-teardrop with an open grille at the front. The interior was designed to be light and airy with a large windshield and glass roof extending over the rear cargo space.

The cabin had two seats forward with a single foldable seat behind, and the ability to carry two mountain bikes at the back. The bike mountings were integral to the design to emphasise that the car was envisioned for use by the more active city-dweller.

The car was designed to use drive by wire to eliminate the need for heavy and bulky mechanical components, while the driver's controls were modular so that the car could be easily switched from left to right hand drive.

Production

The Jeep Trio was produced to appeal to the young urban market in Asia and was unveiled at the 2003 Tokyo Motor Show. The design was promoted as a vision of urban driving “a decade or more” in the future. The concept car was well received by motor journalists and a production vehicle was planned powered by a petrol/electric hybrid drivetrain to be launched by 2008. However, the vehicle remained a one-off build.

See also

List of fuel cell vehicles List of hybrid vehicles

Image gallery at favcars.com

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375303483 under CC BY-SA 4.0; modifications have been made.

Words in each sectionDesignDesignDesign: 244 words244ProductionProductionProduction: 74 words74See alsoSee alsoSee also: 9 words9
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001375303483 · captured 2026-09-16 · ledger · version history

Cite this page as: encyclopegia.org, “Jeep Treo”, snapshot enwiki-001375303483. https://encyclopegia.org/a/jeep-treo

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.