Jet aircraft
de Havilland Comet, the world's first jet airliner entered service in 1952, this later Comet 4B shown in 1969 A jet aircraft (or simply jet) is an aircraft propelled by one or more jet engines.
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
de Havilland Comet, the world's first jet airliner entered service in 1952, this later Comet 4B shown in 1969 A jet aircraft (or simply jet) is an aircraft propelled by one or more jet engines. Jets are nearly always fixed-wing aircraft, though a wide range of different types of jet aircraft exists both for civilian and military purposes.
Most jet aircraft need to fly at high speeds either supersonic, or just below the speed of sound (transonic) in order to achieve efficient flight. They typically cruise around Mach 0.8 (981 km/h; 610 mph), and at altitudes around 10,000–15,000 m (33,000–49,000 ft) or higher, where jet engines operate most efficiently.
This contrasts with propeller-driven aircraft, which achieve peak efficiency at much lower speeds and altitudes. Jet aircraft are usually designed using the Whitcomb area rule, which states that the total area of the cross-section of an aircraft must be approximately the same as that of a Sears–Haack body.
The application of this rule minimizes the production of shockwaves, which waste energy. Frank Whittle, an English inventor and RAF officer, began development of a viable jet engine in 1928, while Hans von Ohain in Germany began to independently work on similar concepts in the early 1930s. Thus, in August of 1939, the world's first jet aircraft, the Heinkel He 178, took its maiden flight.
de Havilland Comet, the world's first jet airliner entered service in 1952, this later Comet 4B shown in 1969 A jet aircraft (or simply jet) is an aircraft propelled by one or more jet engines. Jets are nearly always fixed-wing aircraft, though a wide range of different types of jet aircraft exists both for civilian and military purposes.
Most jet aircraft need to fly at high speeds either supersonic, or just below the speed of sound (transonic) in order to achieve efficient flight. They typically cruise around Mach 0.8 (981 km/h; 610 mph), and at altitudes around 10,000–15,000 m (33,000–49,000 ft) or higher, where jet engines operate most efficiently.
This contrasts with propeller-driven aircraft, which achieve peak efficiency at much lower speeds and altitudes. Jet aircraft are usually designed using the Whitcomb area rule, which states that the total area of the cross-section of an aircraft must be approximately the same as that of a Sears–Haack body.
The application of this rule minimizes the production of shockwaves, which waste energy. Frank Whittle, an English inventor and RAF officer, began development of a viable jet engine in 1928, while Hans von Ohain in Germany began to independently work on similar concepts in the early 1930s. Thus, in August of 1939, the world's first jet aircraft, the Heinkel He 178, took its maiden flight.
History
was the first aircraft to fly on turbojet power, in August 1939 After the first powered aircraft took flight, a multitude of jet designs and approaches were suggested. For example, René Lorin, O. Morise, and H. S. Harris all proposed different systems for creating a jet efflux.
Additionally, during the 1920s and 1930s, a variety of motorjet, turboprop, pulsejet and rocket powered aircraft were designed. Rocket engine research had been underway in Germany, and in 1928 the Lippisch Ente, which had previously been flown as a glider, became the first aircraft to fly using rocket power.
The next year, in 1929, the Opel RAK.1 became the first purpose-built rocket aircraft to fly. The turbojet was independently developed in the 1930s by Frank Whittle and, later, Hans von Ohain. The first turbojet aircraft to fly was the Heinkel He 178, on August 27, 1939 in Rostock (Germany), powered by von Ohain's design.
However, "creep" (metal fatigue caused by the high temperatures within the engine) caused the engine to burn out quickly. Von Ohain's design, an axial-flow engine, as opposed to Whittle's centrifugal flow engine, was eventually adopted by most manufacturers by the 1950s. The first jet-propelled aircraft to gain public attention was the Italian Caproni Campini N.1 motorjet prototype, which flew on August 27, 1940.
Secondo Campini began development of the motorjet in 1932. This design differed from a true turbojet in that the turbine was driven by a piston engine, rather than combustion of the turbine gases.
The British experimental Gloster E.28/39 took its first flight on May 15, 1941, powered by Sir Frank Whittle's turbojet, and the United States Bell XP-59A flew on October 1, 1942, using of a version of the Whittle engine built by General Electric. The Gloster Meteor was the first production jet.
The prototype for this jet was first flown on March 5, 1943, and the first produced aircraft on January 12, 1944.
Jet engines
was one of the fastest jets, flying at Mach 3.35 ( ) Several types of engines operate by expelling hot gas: turbojet turbofan ramjet turboprop Each different kind of engine achieves a different purpose. Turbojets have a high exhaust speed, and low frontal cross-section, making them best suited to supersonic flight.
Although once widely used, they are relatively inefficient compared to turboprop and turbofans for subsonic flight. The last major aircraft to use turbojets were the Concorde and the Tu-144 supersonic transports. Low bypass turbofans have a lower exhaust speed than turbojets, and are mostly used for high sonic, transonic, and low supersonic speeds.
High bypass turbofans are relatively efficient, and are used by subsonic aircraft, such as airliners.
Propulsive efficiency
In aircraft overall propulsive efficiency \eta is the efficiency, in percent, with which the energy contained in a vehicle's propellant is converted into useful energy, to replace losses due to air drag, gravity, and acceleration. It can also be stated as the proportion of the mechanical energy actually used to propel the aircraft.
It is always less than 100% because of kinetic energy loss to the exhaust, and less-than-ideal efficiency of the propulsive mechanism, whether a propeller, a jet exhaust, or a fan. In addition, propulsive efficiency is greatly dependent on air density and airspeed.
Mathematically, it is represented as \eta = \eta_\text{c} \eta_\text{p} , where \eta_\text{c} is the cycle efficiency, and \eta_\text{p} is the propulsive efficiency. The cycle efficiency, in percent, is the proportion of energy that can be derived from the energy source that is converted to mechanical energy by the engine.
For jet aircraft the propulsive efficiency (essentially energy efficiency) is highest when the engine emits an exhaust jet at a speed that is the same as, or nearly the same as, the vehicle velocity. The exact formula for air-breathing engines as given in the literature, is \eta_\text{p} = \frac{2}{1 + \dfrac{c}{v}}, where c is the exhaust speed, and v is the speed of the aircraft.
Range
For a long-range jet operating in the stratosphere, the speed of sound is constant, hence flying at fixed angle of attack and constant Mach number causes the aircraft to climb, without changing the value of the local speed of sound. In this case: V = aM, where M is the cruise Mach number, and a the local speed of sound.
The range equation can be shown to be R = \frac{aM}{c_T} \frac{C_L}{C_D} \ln\frac{W_1}{W_2}, which is known as the Breguet range equation after the French aviation pioneer Louis Charles Breguet.
Bibliography
Lutz Warsitz: The First Jet Pilot – The Story of German Test Pilot Erich Warsitz, Pen and Sword Books Ltd., England, 2009, , English Edition
External links
The official Erich Warsitz website (the world's first jet pilot), inclusive rare videos (Heinkel He 178) and audio commentaries
Text derived from https://en.wikipedia.org/w/index.php?oldid=1360105130 under CC BY-SA 4.0; modifications have been made.