JFET

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The junction field-effect transistor (JFET) is one of the simplest types of field-effect transistor. JFETs are three-terminal semiconductor devices that can be used as electronically controlled switches or resistors, or to build amplifiers. Unlike bipolar junction transistors, JFETs are exclusively voltage-controlled in that they do not need a biasing current. Electric charge flows through a semiconducting channel between source and drain terminals.

Evidence and sources

By applying a reverse bias voltage to a gate terminal, the channel is pinched, so that the electric current is impeded or switched off completely. A JFET is usually conducting when there is zero voltage between its gate and source terminals. If a potential difference of the proper polarity is applied between its gate and source terminals, the JFET will be more resistive to current flow, which means less current would flow in the channel between the source and drain terminals.

JFETs are sometimes referred to as depletion-mode devices, as they rely on the principle of a depletion region, which is devoid of majority charge carriers. The depletion region has to be closed to enable current to flow. JFETs can have an n-type or p-type channel.…

The junction field-effect transistor (JFET) is one of the simplest types of field-effect transistor. JFETs are three-terminal semiconductor devices that can be used as electronically controlled switches or resistors, or to build amplifiers. Unlike bipolar junction transistors, JFETs are exclusively voltage-controlled in that they do not need a biasing current. Electric charge flows through a semiconducting channel between source and drain terminals.

By applying a reverse bias voltage to a gate terminal, the channel is pinched, so that the electric current is impeded or switched off completely. A JFET is usually conducting when there is zero voltage between its gate and source terminals. If a potential difference of the proper polarity is applied between its gate and source terminals, the JFET will be more resistive to current flow, which means less current would flow in the channel between the source and drain terminals.

JFETs are sometimes referred to as depletion-mode devices, as they rely on the principle of a depletion region, which is devoid of majority charge carriers. The depletion region has to be closed to enable current to flow. JFETs can have an n-type or p-type channel. In the n-type, if the voltage applied to the gate is negative with respect to the source, the current will be reduced (similarly in the p-type, if the voltage applied to the gate is positive with respect to the source).

Because a JFET in a common source or common drain configuration has a large input impedance (sometimes on the order of 10 10  ohms), little current is drawn from circuits used as input to the gate. I_\text{D} = \frac{bW}{L} q N_d \mu_n V_\text{DS}, where I D = drain–source current, b = channel thickness for a given gate voltage, W = channel width, L = channel length, q = electron charge = 1.6 C, μ n = electron mobility, N d = n-type doping (donor) concentration, V P = pinch-off voltage.

Then the drain current in the linear region can be approximated as I_\text{D} = \frac{bW}{L} q N_d \mu_n V_\text{DS} = \frac{aW}{L} q N_d \mu_n \left(1 - \sqrt{\frac{V_\text{GS}}{V_\text{P}}}\right) V_\text{DS}. In terms of I_\text{DSS} , the drain current can be expressed as I_\text{D} = \frac{2 I_\text{DSS}}{V_\text{P}^2} \left(V_\text{GS} - V_\text{P} - \frac{V_\text{DS}}{2}\right) V_\text{DS}.

I_\text{DS} = I_\text{DSS} \left(1 - \frac{V_\text{GS}}{V_\text{P}}\right)^2, where I DSS is the saturation current at zero gate–source voltage, i.e. the maximum current that can flow through the FET from drain to source at any (permissible) drain-to-source voltage (see, e. g., the I–V characteristics diagram above). In the saturation region, the JFET drain current is most significantly affected by the gate–source voltage and barely affected by the drain–source voltage.

If the channel doping is uniform, such that the depletion region thickness will grow in proportion to the square root of the absolute value of the gate–source voltage, then the channel thickness b can be expressed in terms of the zero-bias channel thickness a as b = a \left(1 - \sqrt{\frac{V_\text{GS}}{V_\text{P}}}\right), where V P is the pinch-off voltage the gate–source voltage at which the channel thickness goes to zero, a is the channel thickness at zero gate–source voltage. g_\text{m} = \frac{2 I_\text{DSS}} \left(1 - \frac{V_\text{GS}}{V_\text{P}}\right), where V_\text{P} is the pinchoff voltage, and I DSS is the maximum drain current.

This is also called g_\text{fs} or y_\text{fs} (for transadmittance).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373727563 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

19 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.