JJY
JJY is the call sign of a low frequency time signal radio station located in Japan.
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
JJY is the call sign of a low frequency time signal radio station located in Japan. The station broadcasts from two sites, one on Mount Otakadoya, near Fukushima, and the other on Mount Hagane, located on Kyushu island. JJY is operated by the National Institute of Information and Communications Technology (NICT), an independent administrative institution affiliated with the Ministry of Internal Affairs and Communications of the Japanese government.
History and former shortwave station
On January 30, 1940, the Communications Research Laboratory (the predecessor of NICT) began operating JJY as a shortwave station, broadcasting at 4, 7, 9, and 13 MHz. Over the years, the shortwave frequencies were lowered, and by the late 1950s, JJY was transmitting its time signal on standard frequencies of 2.5, 5, 8, 10, and 15 MHz. The 2.5 and 15 MHz broadcasts terminated in 1996.
The time signals included announcements of the time, in Morse code and by a female voice, before every tenth minute: for example, "JJY JJY 1630 JST" (the voice announcement of the time being in Japanese). Experimental station JG2AS began broadcasting on January 10, 1966, providing digitally encoded time signals in the longwave band at 40 kHz.
In 1997, the CRL, determining that the longwave time signal was more accurate when received, subject to less interference, and in wider use than the shortwave time signal, decided to construct a new longwave time station and gradually eliminate the shortwave broadcasts. The first official longwave station of JJY began broadcasting from Mount Otakadoya at 40 kHz on June 10, 1999, and the shortwave broadcasts ceased operation on March 31, 2001.
On October 1, 2001, the 60 kHz longwave transmission from Mount Hagane began. The Mount Otakadoya transmitter survived the 2011 Tōhoku earthquake and tsunami, but is 17 km from the Fukushima I nuclear accidents, and was powered down when it was evacuated on March 12 (19:46 JST) due to the 20 km radius evacuation order. It was re-enabled April 21.
JJY time code
As with most longwave time code stations, the JJY signal is amplitude-modulated to send one bit per second, transmitting a complete time code every minute. The time code is most similar to that transmitted by WWVB, but each bit is reversed: on the second, the carrier is increased to full power.
Some time during the second (depending on the bit to be transmitted), the carrier is reduced by 10 dB, to 10% power, until the beginning of the next second. . Note the Morse code call sign ("JJY JJY") transmitted from 0:40 to 0:49. There are three different signals that are sent each second: 0 bits consist of 0.8 s of full power, followed by 0.2 s of reduced power.
1 bits consist of 0.5 s of full power, followed by 0.5 s of reduced power. Marker bits consist of 0.2 s of full power, followed by 0.8 s of reduced power. As with WWVB, seconds 0, 9, 19, 29, 39, 49 and 59 of each minute are marker bits.
The remaining 53 encode Japan Standard Time using binary-coded decimal. JST does not include summer time, but bits are reserved to handle it.
Leap second warning bits are also provided, these announce leap seconds starting at the beginning of the UTC month (09:00 JST on the first day of the month), and ending with the leap second insertion (just after 08:59 JST on the first day of the following month). The time code in full is as follows: The first 35 seconds are identical to WWVB, but after that it diverges, including some parity and day-of-week bits not in WWVB, and omitting DUT1 information.
P0 is always the last second of a minute. In the event of a leap second, an additional 0 bit is inserted before it, and the marker bit is transmitted during second 60. LS1 and LS2 are normally both 0.
Both bits are set to announce an inserted leap second at the end of the current UTC month. Twice per hour (minutes 15 and 45), the last 20 seconds of the time code are different. In lieu of the year bits, the station's call sign is broadcast in Morse code twice using on-off keying during seconds 40 through 48.
Further, bits 50 through 55 are replaced by 6 status bits ST1 through ST6 which, if non-zero, indicate a scheduled service interruption: ST1 through ST3 indicate the time of the planned service interruption: ST4, if set, promises the service interruption will be during daylight hours only. If unset, the interruption may be all day.
ST5 and ST6 indicate the duration of the interruption: If no interruption is planned, all ST bits are 0.
External links
Japan Standard Time Group Coordinates of Mount Otakadoya transmitter: Coordinates of Mount Hagane transmitter:
Text derived from https://en.wikipedia.org/w/index.php?oldid=1303713102 under CC BY-SA 4.0; modifications have been made.