Jumping wire

World War I submarine.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

World War I submarine. The wires running up from the bow to the conning tower are the jumping wires A jumping wire is a wire cable stretched between the bow and stern of a submarine, via the conning tower or periscope standards.

Its purpose is to allow the submarine to pass under nets and other marine defences, without the obstruction snagging on the vessel's superstructure, the wire causing the net to ride up and over the top of the submarine. Jumping wires have fallen out of use since the end of World War II, as the wire tends to vibrate at high underwater speeds creating noise that may be detected by an enemy using passive sonar, as well as causing hydrodynamic drag.

World War I submarine. The wires running up from the bow to the conning tower are the jumping wires]] A jumping wire is a wire cable stretched between the bow and stern of a submarine, via the conning tower or periscope standards.

Its purpose is to allow the submarine to pass under nets and other marine defences, without the obstruction snagging on the vessel's superstructure, the wire causing the net to ride up and over the top of the submarine. Jumping wires have fallen out of use since the end of World War II, as the wire tends to vibrate at high underwater speeds creating noise that may be detected by an enemy using passive sonar, as well as causing hydrodynamic drag.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1342439154 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.